Albatross fine Chem Ltd. Delhi

A chemical keeping in mind the metallurgy of equipment. An inhibitor keeping in mind the operating temperature and metal.An anti-silica compound for the removal of troublesome silicate scale.A chemical to remove trouble some calcium phosphate scale. A surfactant to remove oil & grease, which interferes with effective cleaning. Scale softening prior to de-scaling & neutralizing after de-scaling.

ARC-1014 XL is a concentrated liquid blend of alkaline materials designed for use in systems containing waters of low pH and low hardness. Primary application to acidic influent water will stabilize pH within the proper range to deliver good corrosion control in cooling towers.ARC-1014 XL can be used to regain control of alkalinity in steam boilers, without introducing affecting the buffering capacity of other treatments being applied to the same system, since this product introduces no buffering.

Cast iron boilers are a type of firetube boiler as well. In most original boiler rooms, the building was built around or on top of the boiler room. When it came time to replace many of these boilers, there was no convenient way to bring in a new boiler. The cast iron sectional boiler provided a solution to this problem. Cast iron sections are taken individually into the boiler room and field assembled at the jobsite. While the initial cost is low, much on-the-job labor is required to make the boiler fully operational. Cast iron boilers are used for closed, low pressure heating systems only. These boilers also have small steaming areas so that they are very sensitive to changes in demand or water levels. Cast iron boilers have rough surfaces that require a lot of water treatment to maintain proper operation. They are sensitive to scale and require care in blowing down. It is difficult to remove sediment and sludge that form in the waterside of this design. That debris becomes encrusted causing the surfaces to overheat and crack. If a section becomes cracked, the entire boiler must be disassembled.