Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

AI

All India Tools Center
location George Town, Chennai, Tamil Nadu

Write a Review
Call Now Call Now

Our Products

  1. Engineering & Shipping Ropes 3 Products available
  2. PVC, PP & Plastic Products 3 Products available
  3. Yarn 3 Products available
  4. Insulators, Mineral Wool, Glass Wool & Insulation Materials 2 Products available
  5. Nuts Bolts And Fasteners 2 Products available
  6. Floor Mats 2 Products available
  7. Hose Pipes 1 Products available
  8. Protective Packaging Products 1 Products available
  9. PVC, HDPE, FRP & Plastic Pipes 1 Products available
  10. Pipe Fittings 1 Products available
  11. Industrial Plastic Pipes 1 Products available
  12. Industrial Valves 1 Products available
  13. Clamps 1 Products available
  14. Plastic Sheets 1 Products available
  15. Roofing And False Ceiling 1 Products available
  16. Gaskets 1 Products available
  17. Geomembranes & Pond Liners 1 Products available
  18. Industrial Seals 1 Products available
  19. Laces, Interlinings & Other Accessories 1 Products available
  20. Cables And Wire Accessories 1 Products available
  21. Industrial & Oil Seals 1 Products available
  22. Badges, Emblems & Lanyards 1 Products available
  23. Hydraulic And Pneumatic Cylinders 1 Products available
  24. Rubber Sheet 1 Products available
  25. Others Products 4 Products available

Gaskets

Our product range contains a wide range of Spiral Wound Metallic Gaskets

Spiral Wound Metallic Gaskets

Spiral Wound Metallic Gaskets
  • Type 304 Stainless Compressed Asbestos Jointing Strips
  • Type 316 Stainless P.T.F.E. Sintered Strip
  • Aluminium Asbestos paper
  • Copper White Chrysotile Asbestos
  • Monel Blue African Crocidolite
  • Steel, Plain Grafseal

Construction :Special Spring like Metal strips are wound with an Asbestos Filler by a special process to assure a leak proof seal. The sealing is done by the Asbestos Filler and the metal strip provides the spring. This combination of metal and soft asbestos Filler piles compresses to its predetermined thickness under bolting pressure and thereby preventing leakage within the limit of its specified pressure and temperature ranges. With the addition of Centering devices, adapt "SPITMAAN" Spiral Wound Gaskets to use on many types of flanges and closures.

Materials :Standard materials are type 304 Stainless steel with white Canadian (Chrysotlie) Asbestos Filler.

Hints Of Installation & Maintenance:

When installing a Spiral Wound Gasket, check the dimensions of the Gaskets for use between pipe and pressure vessel flanges. The procedure is as follows:- Measure ID of flange contact face. Measure Gasket ID. If Gasket ID is not 1/8" larger than flange ID, do not use it unless it can be installed perfectly centered. A Spiral Wound Gasket does not have the same feel as other Metallic or Non-Metallic Gaskets during the bolting-up. It's different-because it gives a little bit under each bolt as it is tightened. It is therefore important to tighten the bolts in small steps in proper sequence as shown hereunder. Final tightening must be uniform with each bolt pulling same load. This will guarantee a trouble free joint. If not uniform, the joint may leak-particularly after it has been in hot service. Tighten the bolts after 24 hours and again a week later.

How To Order:

When ordering "SPITMAAN" Spiral Wound Gaskets, give the following information:

Quantity

Gasket shape

Inside and outside Dimension of Gaskets

Flange width

Gasket Thickness

Operating Pressure

Operating Temperature
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.