Description :-Leak testing equipment refers to a class of nondestructive testing equipment commonly used to measure the escape of liquids, vacuum or gases from sealed components or systems. There are some arrangement of leak testing equipment that require a separate sensor or leak detector as an input. These devices are often equipped with various other components such as calibrators, gauges, pumps and cases.
Application :These equipment find a wide application in the following areas:

• Research & Development
• System Manufacturing
• Furnace/Metallurgy
• Refrigeration Manufacturing
• Air Conditioning Manufacturing
• Chemical Industry
• Analytical Requirements
• Automotive Component Industry
• Oil & Gas Plants

Description :-Capacitance testers are mainly used to test the performance and capabilities of capacitors, particularly their capability of holding or storing an electrical charge. It is very important to conduct capacitance testing to detect any leakage in capacitors, which may reduce overall effectiveness of a circuit or lead to electrical breakdown of a device.
Uses & Applications of Capacitance Testers :This technology finds wide application in a number of industries. Some of the popular industries are:

• Used to perform capacitance continuity test.
• Identify when a capacitor is weak or leaking.
• Identify whether a capacitor is open and not storing a charge.
• Signal processing.
• Power supply applications.
• Computer motherboards.

Description :-Continuity tester is an electrical test equipment used to examine whether current flows between two points or whether an electrical path can be established between two test leads.The tester comprises of an indicator that is connected in series with a source of electrical power, usually a battery terminating in two test points. The indicator is activated when a complete circuit is established between the two test-leads.
Application :The common applications of continuity testers are:

• Cable testing
• Harness testing
• Automotives
• Automated product testing
• Commercial application
• Military application
• Aerospace application
• Domestic & industrial wiring testing

Description :-Current leakage testers are devices that are used to measure the amount of current that passes through a ground conductor. These devices can be used both during normal and single-fault conditions to determine whether electrical devices pose a shock hazard.
Salient Features & Uses :These equipment find a wide application in the following areas:

• The tester consists of a measuring device or probe that gets connected to a voltmeter that displays root mean square values.
• The tester also includes a circuit featuring specific frequency and resistance.
• Available as manual, semi-automatic and automatic types.
• Common testers include an RS232 serial bus or a parallel port designed for connecting to a printer.
• There are some leakage testers, which consists of a general-purpose interface bus and are designed to connect to computers, peripherals, and laboratory instruments.
• These devices differ in terms of current leakage range, communications, resistance range and special features.
• The leakage testers meet the requirements of various national and international standard organizations.
• Provided with a rapid cut off system to protect the device from high voltage or current.
• Provided with front panel lockouts that prevent any damage to the instrument during testing.

Description :-RFI/EMI Testers are used to monitor the presence of undesirable electromagnetic interference (EMI) and radio frequency interference (RFI) in an electrical equipment. EMI and RFI are electromagnetic emissions ejected by electrical circuits. They are a sort of disturbance that may be man-made or natural, and which causes an undesirable response or degradation in the performance of an electrical equipment.EMI/RFI testers identify interference that could potentially cause a failure, which might interfere with medical equipment or halt a manufacturing process.
Applications :

• Military Equipments
• Medical Equipments
• Electrical Devices
• Electronic Devices

Description :-These are electrical safety test devices that are commonly used for performing electrical compliance tests. There are different types of measurement performed by hipot testers including AC dielectric strength, DC dielectric strength, AC/DC selectable, arc detection or tracking, insulation resistance and earth continuity.
Applications :These synthesizers are widely used in many fields. Some of the areas where they find their application are:

• Electrical apparatus
• Electronic circuits
• DC field testing of cables
• Terminations
• Motors
• Generators

Description :-Gear roll testers are precision testing machines that are largely used for testing internal or external gears.
Salient Features of Roll Tester :Gear roll testers have many different features, which make them suitable for testing different types of gears. Some of its important features are:

• Roll testers are have a sturdy constructions and are designed using graded cast iron castings for durability.
• They are provided with various characteristics to test different types of gears like bore type, spur and helical gear, integrated shaft gears, cluster gears, etc.
• These equipment feature sensitive floating carriage mechanism, loading and unloading time, low setting, and direct reading dial gauges that are ideal for testing various types of gears and gear diameters.
• Gear roll testers for testing cluster gears possess features like bell crank type machines, cluster roll testing against all mating gears at a time, reduced loading, unloading, setting times, etc.
• Roll testers are sometimes combined with a dual spindle device where the test gear is meshed or run against a master gear.

Description :-Friction tester is an equipment commonly used to test frictional features of various materials in dry or lubricated interacting motion contact. Friction testers can be used to test a wide range of materials including metals, composites, ceramics, polymers, fluid lubricants, greases, cutting fluids, coatings, etc.
Salient Features:

• Available in various configurations like ball on flat, pin on flat and cylinder on flat contact area.
• There is arrangement for electronic control of temperature, frequency and stroke length.
• The equipment requires small specimen size or sample for testing.
• Custom configurations are available for the equipment.
• Provided with necessary software for record and graph test results.

Description :-The air permeability tester is an equipment usually used for quick and accurate determination of air permeability of almost all types of flat materials and foam cubes. In the textile industry, they are widely used to test the air permeability of airbag fabric and significantly open non-woven and forming fabrics. The machine can also be used to test air permeability of dense papers.
Salient Features:

• The instrument is easy and simple to use.
• It has a small size and is mobile and can easily be used in the production area.
• It can work both automatically and digitally.
• Provided with a powerful vacuum pump that fetches air through an interchangeable test head having a circular opening.
• For the purpose of measurement, the test head is installed on the instrument.
• The test specimen is placed on the test head opening by compressing the clamping arm, which in turn stars the vacuum pump automatically.
• The vacuum pump is closed down by compressing the clamping arm second time leading to the release of test specimen.
• Flow of air through the test sample is calculated via a variable fissure.
• Air permeability of the specimen under test is obtained from the pressure drop in the fissure and is displayed digitally.

Description :-The instrument is used to determine the bursting strength of textile fabrics. Bursting strength of a material is defined as the hydrostatic pressure required to produce rupture of a material when the pressure is applied at a controlled increasing rate through a rubber diaphragm. It is actually strength of a material under multi-directional force. The instrument is used for testing bursting strength of materials like leather, paper, etc.
Salient Features :These equipment find a wide application in the following areas:

• The specimen to be tested is held between two annular locks or clamps under optimum pressure to eliminate chances of slippage.
• There is a continuous spiral groove at the upper clamping surface. There are a number of concentric grooves on the lower clamping surface.
• There is a circular diaphragm made of gum rubber that is fixed between the lower clamping plate and a pressure cylinder.
• There is a motor driven cam mechanism in the machine which increases fluid displacement on the lower side of the diaphragm at a specific rate.
• Provided with a digital pressure gauge with peak memory that indicates the maximum pressure achieved before failure of the test specimen.

Description :-The equipment is widely used in textile industry to determine pilling and fizzing properties of almost all types of fabrics. The instrument can be used to determine the resistance to the formation of pills and other related surface changes on textile fabrics. The equipment finds application in all types of woven and knitted apparel fabrics.
Salient Features:These synthesizers are widely used in many fields. Some of the areas where they find their application are:

• The instrument is available in two models: two chambered and four chambered.
• Provided with digital timer control along with an automatic test shutoff.
• The equipment provides test results under controllable conditions to compare with end-use performance of a fabric.
• There are clear viewing doors for observing the test.
• Supplied with cork liners, adhesive, cotton silver and ASTM photographic standards.
• There is an in-built air injection system.

Description :-Tear strength tester is an instrument used to test the tear strength of textile fabrics. The tear strength defined as the force required to start or continue a tear in a fabric under specified conditions. Determining the tear strength of fabric is very important.
Salient Features:

• The equipment consist of a falling pendulums to cover various measuring ranges.
• Provided with cutting templates, cutting knife and board for preparing sample for the test.
• There are start and stop safety solenoids to hold the pendulum at the beginning and end of each test.
• The tear test parameters include tearing strength, peak load and median load.

Description :-Friction testing of yarn is very important in textile processing. It plays a major role in weaving efficiency and in the performance of the final fabrics. Yarn friction tester is widely used to test the friction characteristics of fiber yarn. Generally, frictional behaviour of yarns made from different spinning system is effected by their surface structure.Friction between fibers in a yarn is a basic property effecting the characteristics of a textile product during all stages of production and use. Besides that different physical or chemical properties of yarns tend to impart different surface characteristic and different friction behavior.
Salient Features:

• The equipment provides fast and accurate reproducible measuring results.
• The yarn specimen to be tested is drawn over a friction body at a definite speed and angle.
• The tensile force is calculated before from this friction body.

Description :-

Applications:The equipment finds application in the following areas:

• Automobile Industry
• Plastic Industry
• Biomedical Instruments
• Rubber Industry
• Polyurethane Industry

Description :-

Applications:
Endurance testers are used in the following areas:

• Automobile manufacturing industry
• Turbine fuel systems

Description :-

Salient Features:

• The apparatus consists of a horizontal flame or combustion chamber made of stainless steel sheet, in which test is carried out.
• There is a polycarbonate window in the flame chamber for observing the test specimen during test.
• There is a test specimen holder, used for mounting the test specimen during test.
• There is a Bunsen burner to provide flame.
• Supplied with an array of timers, which controls the flame application time and measures the flame time.
• There is a pre-set type electronic timer, which starts automatically as soon as the test specimen is brought in position above the Bunsen burner.

Description :-

Salient Features:

• The test method involves pressure cycle and flow testing of a chilled or heated engine coolant mixture.
• This is accomplished by passing the coolant mixture through radiators, hoses, heater cores and overflow recovery tanks.
• The equipment also requires environmental chambers and vibration controllers as an interface for synchronization to other machines.
• Pump cavity of coolant mixture at high temperature is accomplished by pump selection; pump and plumbing; and suction pressure and relative mounting locations of reservoir.

Description :-

Applications:Impact tester are widely used in the many fields. Some of its common applications are:

• Automobile Industry
• Plastic Industry
• Metal Industry

Description :-

Applications:
Vibration testers are widely used for conducting vibration tests on various automobile parts & components. Some other areas where they are used are:

• Automotive Industry.
• Environmental Stress Testing.
• Aerospace
• Military/Defense
• Microelectronics

Description :-The apparatus is widely used for testing abrasion resistance of plastic materials. In fact, it has multipurpose usage and can also be used to test abrasion resistance of rubber, paint, plywood, leather and paper.Abrasion in general, is caused by three main factors: the type of abradant, the surface area; and the force of abrasion on the material.
Applications:
Some of the areas where the abrasion testers finds application are:

• Plastic Industry
• Rubber Industry
• Leather Industry
• Chemical Industry
• Polymer Industry
• Automobile Industry
• Paint Industry
• Paper Industry
• Plywood Industry

Description :-

Applications:The important features of the equipment are:* Automobile Industry* Medical Devices* Plastic Industry* Construction Industry* Chemical Industry* Paint Testing* Adhesive Industry* Sealants* Laminates* Cosmetics Industry* Electronics Industry* Medical device packaging* General packaging seal strength

Description :-Leak testing equipment refers to a class of nondestructive testing equipment commonly used to measure the escape of liquids, vacuum or gases from sealed components or systems. There are some arrangement of leak testing equipment that require a separate sensor or leak detector as an input. These devices are often equipped with various other components such as calibrators, gauges, pumps and cases.
Application :These equipment find a wide application in the following areas:

• Research & Development
• System Manufacturing
• Furnace/Metallurgy
• Refrigeration Manufacturing
• Air Conditioning Manufacturing
• Chemical Industry
• Analytical Requirements
• Automotive Component Industry
• Oil & Gas Plants

Description :-Capacitance testers are mainly used to test the performance and capabilities of capacitors, particularly their capability of holding or storing an electrical charge. It is very important to conduct capacitance testing to detect any leakage in capacitors, which may reduce overall effectiveness of a circuit or lead to electrical breakdown of a device.
Uses & Applications of Capacitance Testers :This technology finds wide application in a number of industries. Some of the popular industries are:

• Used to perform capacitance continuity test.
• Identify when a capacitor is weak or leaking.
• Identify whether a capacitor is open and not storing a charge.
• Signal processing.
• Power supply applications.
• Computer motherboards.

Description :-Continuity tester is an electrical test equipment used to examine whether current flows between two points or whether an electrical path can be established between two test leads.The tester comprises of an indicator that is connected in series with a source of electrical power, usually a battery terminating in two test points. The indicator is activated when a complete circuit is established between the two test-leads.
Application :The common applications of continuity testers are:

• Cable testing
• Harness testing
• Automotives
• Automated product testing
• Commercial application
• Military application
• Aerospace application
• Domestic & industrial wiring testing

Description :-Current leakage testers are devices that are used to measure the amount of current that passes through a ground conductor. These devices can be used both during normal and single-fault conditions to determine whether electrical devices pose a shock hazard.
Salient Features & Uses :These equipment find a wide application in the following areas:

• The tester consists of a measuring device or probe that gets connected to a voltmeter that displays root mean square values.
• The tester also includes a circuit featuring specific frequency and resistance.
• Available as manual, semi-automatic and automatic types.
• Common testers include an RS232 serial bus or a parallel port designed for connecting to a printer.
• There are some leakage testers, which consists of a general-purpose interface bus and are designed to connect to computers, peripherals, and laboratory instruments.
• These devices differ in terms of current leakage range, communications, resistance range and special features.
• The leakage testers meet the requirements of various national and international standard organizations.
• Provided with a rapid cut off system to protect the device from high voltage or current.
• Provided with front panel lockouts that prevent any damage to the instrument during testing.

Description :-RFI/EMI Testers are used to monitor the presence of undesirable electromagnetic interference (EMI) and radio frequency interference (RFI) in an electrical equipment. EMI and RFI are electromagnetic emissions ejected by electrical circuits. They are a sort of disturbance that may be man-made or natural, and which causes an undesirable response or degradation in the performance of an electrical equipment.EMI/RFI testers identify interference that could potentially cause a failure, which might interfere with medical equipment or halt a manufacturing process.
Applications :

• Military Equipments
• Medical Equipments
• Electrical Devices
• Electronic Devices

Description :-These are electrical safety test devices that are commonly used for performing electrical compliance tests. There are different types of measurement performed by hipot testers including AC dielectric strength, DC dielectric strength, AC/DC selectable, arc detection or tracking, insulation resistance and earth continuity.
Applications :These synthesizers are widely used in many fields. Some of the areas where they find their application are:

• Electrical apparatus
• Electronic circuits
• DC field testing of cables
• Terminations
• Motors
• Generators

Description :-Gear roll testers are precision testing machines that are largely used for testing internal or external gears.
Salient Features of Roll Tester :Gear roll testers have many different features, which make them suitable for testing different types of gears. Some of its important features are:

• Roll testers are have a sturdy constructions and are designed using graded cast iron castings for durability.
• They are provided with various characteristics to test different types of gears like bore type, spur and helical gear, integrated shaft gears, cluster gears, etc.
• These equipment feature sensitive floating carriage mechanism, loading and unloading time, low setting, and direct reading dial gauges that are ideal for testing various types of gears and gear diameters.
• Gear roll testers for testing cluster gears possess features like bell crank type machines, cluster roll testing against all mating gears at a time, reduced loading, unloading, setting times, etc.
• Roll testers are sometimes combined with a dual spindle device where the test gear is meshed or run against a master gear.

Description :-Friction tester is an equipment commonly used to test frictional features of various materials in dry or lubricated interacting motion contact. Friction testers can be used to test a wide range of materials including metals, composites, ceramics, polymers, fluid lubricants, greases, cutting fluids, coatings, etc.
Salient Features:

• Available in various configurations like ball on flat, pin on flat and cylinder on flat contact area.
• There is arrangement for electronic control of temperature, frequency and stroke length.
• The equipment requires small specimen size or sample for testing.
• Custom configurations are available for the equipment.
• Provided with necessary software for record and graph test results.

Description :-The air permeability tester is an equipment usually used for quick and accurate determination of air permeability of almost all types of flat materials and foam cubes. In the textile industry, they are widely used to test the air permeability of airbag fabric and significantly open non-woven and forming fabrics. The machine can also be used to test air permeability of dense papers.
Salient Features:

• The instrument is easy and simple to use.
• It has a small size and is mobile and can easily be used in the production area.
• It can work both automatically and digitally.
• Provided with a powerful vacuum pump that fetches air through an interchangeable test head having a circular opening.
• For the purpose of measurement, the test head is installed on the instrument.
• The test specimen is placed on the test head opening by compressing the clamping arm, which in turn stars the vacuum pump automatically.
• The vacuum pump is closed down by compressing the clamping arm second time leading to the release of test specimen.
• Flow of air through the test sample is calculated via a variable fissure.
• Air permeability of the specimen under test is obtained from the pressure drop in the fissure and is displayed digitally.

Description :-The instrument is used to determine the bursting strength of textile fabrics. Bursting strength of a material is defined as the hydrostatic pressure required to produce rupture of a material when the pressure is applied at a controlled increasing rate through a rubber diaphragm. It is actually strength of a material under multi-directional force. The instrument is used for testing bursting strength of materials like leather, paper, etc.
Salient Features :These equipment find a wide application in the following areas:

• The specimen to be tested is held between two annular locks or clamps under optimum pressure to eliminate chances of slippage.
• There is a continuous spiral groove at the upper clamping surface. There are a number of concentric grooves on the lower clamping surface.
• There is a circular diaphragm made of gum rubber that is fixed between the lower clamping plate and a pressure cylinder.
• There is a motor driven cam mechanism in the machine which increases fluid displacement on the lower side of the diaphragm at a specific rate.
• Provided with a digital pressure gauge with peak memory that indicates the maximum pressure achieved before failure of the test specimen.

Description :-The equipment is widely used in textile industry to determine pilling and fizzing properties of almost all types of fabrics. The instrument can be used to determine the resistance to the formation of pills and other related surface changes on textile fabrics. The equipment finds application in all types of woven and knitted apparel fabrics.
Salient Features:These synthesizers are widely used in many fields. Some of the areas where they find their application are:

• The instrument is available in two models: two chambered and four chambered.
• Provided with digital timer control along with an automatic test shutoff.
• The equipment provides test results under controllable conditions to compare with end-use performance of a fabric.
• There are clear viewing doors for observing the test.
• Supplied with cork liners, adhesive, cotton silver and ASTM photographic standards.
• There is an in-built air injection system.

Description :-Tear strength tester is an instrument used to test the tear strength of textile fabrics. The tear strength defined as the force required to start or continue a tear in a fabric under specified conditions. Determining the tear strength of fabric is very important.
Salient Features:

• The equipment consist of a falling pendulums to cover various measuring ranges.
• Provided with cutting templates, cutting knife and board for preparing sample for the test.
• There are start and stop safety solenoids to hold the pendulum at the beginning and end of each test.
• The tear test parameters include tearing strength, peak load and median load.

Description :-Friction testing of yarn is very important in textile processing. It plays a major role in weaving efficiency and in the performance of the final fabrics. Yarn friction tester is widely used to test the friction characteristics of fiber yarn. Generally, frictional behaviour of yarns made from different spinning system is effected by their surface structure.Friction between fibers in a yarn is a basic property effecting the characteristics of a textile product during all stages of production and use. Besides that different physical or chemical properties of yarns tend to impart different surface characteristic and different friction behavior.
Salient Features:

• The equipment provides fast and accurate reproducible measuring results.
• The yarn specimen to be tested is drawn over a friction body at a definite speed and angle.
• The tensile force is calculated before from this friction body.

Description :-

Applications:The equipment finds application in the following areas:

• Automobile Industry
• Plastic Industry
• Biomedical Instruments
• Rubber Industry
• Polyurethane Industry

Description :-

Applications:
Endurance testers are used in the following areas:

• Automobile manufacturing industry
• Turbine fuel systems

Description :-

Salient Features:

• The apparatus consists of a horizontal flame or combustion chamber made of stainless steel sheet, in which test is carried out.
• There is a polycarbonate window in the flame chamber for observing the test specimen during test.
• There is a test specimen holder, used for mounting the test specimen during test.
• There is a Bunsen burner to provide flame.
• Supplied with an array of timers, which controls the flame application time and measures the flame time.
• There is a pre-set type electronic timer, which starts automatically as soon as the test specimen is brought in position above the Bunsen burner.

Description :-

Salient Features:

• The test method involves pressure cycle and flow testing of a chilled or heated engine coolant mixture.
• This is accomplished by passing the coolant mixture through radiators, hoses, heater cores and overflow recovery tanks.
• The equipment also requires environmental chambers and vibration controllers as an interface for synchronization to other machines.
• Pump cavity of coolant mixture at high temperature is accomplished by pump selection; pump and plumbing; and suction pressure and relative mounting locations of reservoir.

Description :-

Applications:Impact tester are widely used in the many fields. Some of its common applications are:

• Automobile Industry
• Plastic Industry
• Metal Industry

Description :-

Applications:
Vibration testers are widely used for conducting vibration tests on various automobile parts & components. Some other areas where they are used are:

• Automotive Industry.
• Environmental Stress Testing.
• Aerospace
• Military/Defense
• Microelectronics

Description :-The apparatus is widely used for testing abrasion resistance of plastic materials. In fact, it has multipurpose usage and can also be used to test abrasion resistance of rubber, paint, plywood, leather and paper.Abrasion in general, is caused by three main factors: the type of abradant, the surface area; and the force of abrasion on the material.
Applications:
Some of the areas where the abrasion testers finds application are:

• Plastic Industry
• Rubber Industry
• Leather Industry
• Chemical Industry
• Polymer Industry
• Automobile Industry
• Paint Industry
• Paper Industry
• Plywood Industry

Description :-

Applications:The important features of the equipment are:* Automobile Industry* Medical Devices* Plastic Industry* Construction Industry* Chemical Industry* Paint Testing* Adhesive Industry* Sealants* Laminates* Cosmetics Industry* Electronics Industry* Medical device packaging* General packaging seal strength