Air from a blower will be diffused through a Diffuser grid. It consists of porous membranes of dia disc or tubular type diffusers made of EPDM material. Diffusers are designed to ensure uniform permeability and to produce a flow of fine air bubbles and provides high contact area and more contact time due to slow rise of the bubbles which makes the system very efficient in terms of oxygen transfer efficiency thus low installed HP for the blower drive and hence low operational cost.

We are leading manufacturer & exporter of PROFLEX is brand of EPDM Diffusers offer many options on the type of diffusers and materials of construction. Our years of experience allow us to provide the industry with valuable input on solutions for all types of waste water aeration applications including unique tank.

Mostly iron in ground water is present in ferrous form. When this water is exposed to atmospheric oxygen, ferrous converted to ferric form and hence the red color is formed. Hence the iron removal treatment systems are designed with rapid oxidation by addition chlorine followed by setting and filtration.

Generally constructed circular in shape with a hopper bottom. A slow moving racker arm rotates around, scrapping and bringing the deposited suspended solids to the centre well, from which it is taken out as sludge.

Air from a blower will be diffused through a Diffuser grid. It consists of porous membranes of dia disc or tubular type diffusers made of EPDM material.The diffusers are of non-buoyant type, which during shutdown condition contracts to prevent any back-flow.Diffusers are designed to ensure uniform permeability and to produce a flow of fine air bubbles and provides high contact area and more contact time due to slow rise of the bubbles which makes the system very efficient in terms of oxygen transfer efficiency thus low installed HP for the blower drive and hence low operational cost.

Ultrafiltation is a low pressure membrane filtration to selectively remove suspended and colloidal particles upto a level of 0.001 micron in size. UF is generally used as pre-treatment to RO plants. UF membranes are available in hollow fibre or spiral wound in configuration, we use such membranes from reputed manufacturers.

• Either for raw water or treated effluent recycling, our RO plants are designed for optimum conditions of membrane life, investment &operating cost.
• It is done after through understanding and analysis of feed water conditions in worst probabilities with right kind of pre treatment steps.
• RO plants are offered with enough safety measure and automation.
• Out of the leading membrane manufactures right kind of membrane is selected and offered for specific requirements.
• In worst cases ultra filtration is offered as pre treatment to RO plant.

Turnkey execution of ETPS for different kind of process industries like textile, tannery food, dairy, chemical, pharmaceutical, paper industries etc. Successfully completed more than 100 installations for textile processing industries with Reverse Osmosis(RO) Plant for water reuse & ZERO DISCHARGE. .

Compact, modular as well as turnkey installation of STP for residential apartments, hotels, hospitals, institutions, corporations for treatment of total sewage water generated and reuse.

Evaporators for different applications like:-concentration of high TDS effluent waterconcentration of dilute liquids like food products, fruit juices etc., in different configurations like:-Multistage falling film typeForced circulationNatural circulation etc., in combination with thermal vapour recompresses (TVR) for steam economy.

ETP Bushing are used by packaging industries throughout the world. A fascinating concept uses a hydraulic principal to hold any component to a shaft without interfering and messy keys and keyways.

The Evaporators that we offer is segregated into two cubicles; the Inner Cubicle and the Outer Cubicle. Chlorine liquid is shifted directly from the source to the inner cubicle through the container pressure. The Inner Cubicle is immersed in a temperature regulated steam bath that enhances the temperature of chlorine making it to boil and vaporize. The Chlorine liquid enters the inner cubicle and keeps the needed level required to meet the vaporization rate for gas demand. Automatically, a shift in gas demand will make the chlorine liquid level to adjust. The gas thus produced is superheated as it travels through series of baffles while leaving the cubicle. Normally, a superheated gas is needed to check the re-liquefaction of chlorine in the process lines.

Air from a blower will be diffused through a Diffuser grid. It consists of porous membranes of dia disc or tubular type diffusers made of EPDM material. Diffusers are designed to ensure uniform permeability and to produce a flow of fine air bubbles and provides high contact area and more contact time due to slow rise of the bubbles which makes the system very efficient in terms of oxygen transfer efficiency thus low installed HP for the blower drive and hence low operational cost.

We are leading manufacturer & exporter of PROFLEX is brand of EPDM Diffusers offer many options on the type of diffusers and materials of construction. Our years of experience allow us to provide the industry with valuable input on solutions for all types of waste water aeration applications including unique tank.

Mostly iron in ground water is present in ferrous form. When this water is exposed to atmospheric oxygen, ferrous converted to ferric form and hence the red color is formed. Hence the iron removal treatment systems are designed with rapid oxidation by addition chlorine followed by setting and filtration.

Generally constructed circular in shape with a hopper bottom. A slow moving racker arm rotates around, scrapping and bringing the deposited suspended solids to the centre well, from which it is taken out as sludge.

Air from a blower will be diffused through a Diffuser grid. It consists of porous membranes of dia disc or tubular type diffusers made of EPDM material.The diffusers are of non-buoyant type, which during shutdown condition contracts to prevent any back-flow.Diffusers are designed to ensure uniform permeability and to produce a flow of fine air bubbles and provides high contact area and more contact time due to slow rise of the bubbles which makes the system very efficient in terms of oxygen transfer efficiency thus low installed HP for the blower drive and hence low operational cost.

Ultrafiltation is a low pressure membrane filtration to selectively remove suspended and colloidal particles upto a level of 0.001 micron in size. UF is generally used as pre-treatment to RO plants. UF membranes are available in hollow fibre or spiral wound in configuration, we use such membranes from reputed manufacturers.

• Either for raw water or treated effluent recycling, our RO plants are designed for optimum conditions of membrane life, investment &operating cost.
• It is done after through understanding and analysis of feed water conditions in worst probabilities with right kind of pre treatment steps.
• RO plants are offered with enough safety measure and automation.
• Out of the leading membrane manufactures right kind of membrane is selected and offered for specific requirements.
• In worst cases ultra filtration is offered as pre treatment to RO plant.

Turnkey execution of ETPS for different kind of process industries like textile, tannery food, dairy, chemical, pharmaceutical, paper industries etc. Successfully completed more than 100 installations for textile processing industries with Reverse Osmosis(RO) Plant for water reuse & ZERO DISCHARGE. .

Compact, modular as well as turnkey installation of STP for residential apartments, hotels, hospitals, institutions, corporations for treatment of total sewage water generated and reuse.

Evaporators for different applications like:-concentration of high TDS effluent waterconcentration of dilute liquids like food products, fruit juices etc., in different configurations like:-Multistage falling film typeForced circulationNatural circulation etc., in combination with thermal vapour recompresses (TVR) for steam economy.

ETP Bushing are used by packaging industries throughout the world. A fascinating concept uses a hydraulic principal to hold any component to a shaft without interfering and messy keys and keyways.

The Evaporators that we offer is segregated into two cubicles; the Inner Cubicle and the Outer Cubicle. Chlorine liquid is shifted directly from the source to the inner cubicle through the container pressure. The Inner Cubicle is immersed in a temperature regulated steam bath that enhances the temperature of chlorine making it to boil and vaporize. The Chlorine liquid enters the inner cubicle and keeps the needed level required to meet the vaporization rate for gas demand. Automatically, a shift in gas demand will make the chlorine liquid level to adjust. The gas thus produced is superheated as it travels through series of baffles while leaving the cubicle. Normally, a superheated gas is needed to check the re-liquefaction of chlorine in the process lines.