Our Products
We offer the best product range of Stop Valve, Ball Valve, Flanged End Wheel Valve, Stop Valves and Ball Valves.
| Design | : | Screw-down Cast Iron Stop Valve screwed female ends with Forged Brass spindle & Brass jumper valve. |
| Range | : | 15mm to 25 mm. |
| Marking | : | One side of the body "ALTO" & "Size".Other side of the body "Tested 20kg/cm". |
| Utility | : | Quite suitable for Water and Oil applications. |
| Temp. Range | : | 10 C to 100 C. |
| Testing | : | Hydraulically |
| Test Pressure | Max C.W.P | ||||
| Body | Seat | Body/Seat | |||
| 300 PSI |
20 kg/cm² |
300 PSI |
20 kg/cm² |
200 PSI |
14 kg/cm² |
| DIMENSIONS : (in mm) | ||||||||
| Size (in mm) | A | B* | ||||||
| 15 | 75 | 88 | ||||||
| 20 | 92 | 118 | ||||||
| 25 | 107 | 132 | ||||||
| MATERIALS : | ||
| Components | Material | Specification |
| Body, Gland Nut, Bonnet & Handle | Cast Iron | IS : 210 Gr. FG-200 |
| Stem & Jumper Valve | Brass | IS : 3488 |
| Disc | Synthetic rubber | BS-2751 BA 80 |
| Gland Packing | Asbestos Yarn | IS : 4687-1980 |
| Pin | Mild Steel | IS : 226 |
| Design | : | Cast Iron Ball Valves BSP Screwed Female Ends One Piece Design having S S Ball supported by PTFE rings, Flat Lever attached from l5mm to 50mm & S.G. Iron Handle attached from 65mm to 100mm. NOTE : A detachable Pipe Handle is supplied with this Valve (from 65mm to 100mm) to be attached with S.G. Iron Handle while installing/operating. | |
| Range | : | 15mm to 100mm. | |
| Operation Marking | : : | Quick opening by quarter turn operation. One side of body "ALTO" & "Size". Other side of body "Tested 34kg/cm". | |
| Utility | : | Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (Water, Oil etc) installations. | |
| Temp. Range | : | 10 C to 200 C. | |
| Testing | : | Hydraulically | |
| Test Pressure | Max C.W.P | ||||
| Body | Seat | Body/Seat | |||
| 500 PSI |
34 kg/cm² |
300 PSI |
20 kg/cm² |
200 PSI |
14 kg/cm² |
| DIMENSIONS : (in mm) | |||
| Size (in mm) | A | B* | C* |
| 15 | 80 | 61 | 100 |
| 20 | 86 | 68 | 105 |
| 25 | 95 | 75 | 125 |
| 32 | 115 | 105 | 173 |
| 40 | 121 | 105 | 173 |
| 50 | 133 | 105 | 200 |
| 65 | 155 | 124 | 354 |
| 80 | 178 | 136 | 354 |
| 100 | 218 | 187 | 428 |
| MATERIALS : | ||
| Components | Material | Specification |
| Body | Cast Iron | IS : 210 Gr. FG-200 |
| Ball | Stainless Steel | AISI-202/304/316 |
| Stem & Gland Bush | Stainless Steel | AISI-410/202/304/316 |
| Nuts, Stopper & Lever | Mild Steel | IS : 226 |
| Handle | S.G. Iron | IS : 1865 Gr.450/10 |
| Body Seat Rings, Gland Packing & Stem Seal | P T F E | --- |
| Lever/Pipe Sleeve | P.V.C | P.V.C |
| Design | : | Cast Iron Wheel (Globe) Valve Flanged Ends (Undrilled) matched to IS:778-1984-Class-II Available in Bronze renewable seat and Forged Brass stem. (Valves with Drilled Flanges may be supplied on demand) |
| Range | : | 15mm to 100mm. |
| Operation Marking | : : | Hand Wheel Operated. One side of body "ALTO"Other side of body "Tested", "Size" & "Arrow". |
| Utility | : | Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations. |
| Temp. Range | : | 10 C to 200 C |
| Testing | : | Hydraulically |
| Test Pressure | |||
| Body | Seat | ||
| 300 PSI |
20 kg/cm² |
300 PSI |
20 kg/cm² |
| DIMENSIONS : (in mm) | |||||||
| Size (in mm) | A | B* | D | T | |||
| 15 | 75 | 92 | 95 | 8 | |||
| 20 | 85 | 98 | 105 | 8 | |||
| 25 | 95 | 118 | 115 | 10 | |||
| 32 | 110 | 132 | 140 | 10 | |||
| 40 | 120 | 148 | 150 | 11 | |||
| 50 | 145 | 166 | 165 | 13 | |||
| 65 | 165 | 208 | 185 | 15 | |||
| 80 | 185 | 224 | 200 | 15 | |||
| 100 | 216 | 265 | 220 | 18 | |||
| MATERIALS : | ||
| Components | Material | Specification |
| Body, Bonnet, Gland Nut , Gland Bush & Hand Wheel | Cast Iron | IS : 210 Gr. FG-200 |
| Seat | Bronze | LTB-2 IS : 318-1981 |
| Stem | Brass | IS : 3488 |
| Gland Packing | Asbestos Yarn | IS : 4687-1980 |
| Screw/Bolt Washer & Nut | Mild Steel | IS : 226 |