Post Buy Requirement
AI
Noida, Delhi, India
Add Review

Our Products #4754592

Centrifuge

  • Max.RPM 5250
  • Max.RCF 3900
  • MAx.Capacity 400ml
  • Head R-81-A
  • Size 12 x 150ml
  • W x Dx H. 365 x 415 x 305mm
View Complete Details

Digital Turbidity Meter

  • Light Source LED 3V, 0.3 Amp.
  • Parameter Turbidity
  • Range 0 to 1000.0 NTU
  • Resolution 1 NTU
  • Accuracy ±3 %(FS) ±1 digit ( 0 to 400JTU) + 4% (FS)+1 digit (401 to 1000JTU)
  • Sample System 30mm clear Glass test tube
  • Calibration Manual
  • Indication: 3 ½ digit LED 3 ½ digit LED (12.5mmhigh).
  • Detector Photodiode
  • Power Supply 230 V ±10%, 50 Hz AC.
  • Dimensions (L x B x H)mm 275 x 195 x 105 mm. Weight: 3 kgs
  • Accessories Test tube , Dust Cover, Instruction manual etc.
View Complete Details

Heating Mantle

  • Temperature up to 350 °C.
  • Flask Capacity 2000 ml
  •    
View Complete Details

Polarimeter

  • Measurement Range Of +130° To -30°
  • Vernier Accuracy 0.1°(I.S.S.)
  • Telescopic Magnification 4.5x
  • Least Count 0.01º
  • Analyzer Glens Thompson Prisms, Polarizer Half Shade, Polarizing System Aperture 6 Mm
  • Light Source Arrangement For 35watt Sodium Vapour Lamp Light Source Input
  • Tube Borosil Glass Tube 200mm Cut Type 220v+10% Vac
View Complete Details

Stack Sampler

  • Stack Temp Range Ambient to 600 deg C on a Digital Pyrometer.
  • Stack Velocity Range 3 to 60 m/sec
  • Thermocouple T/C sensor
  • SS 304 casing, length of insertion 0.6 m with 2m long cable.
  • Manometer Digital with 01300 mm of H2O range
  • Pitot Tube Calibrated S type fabricated SS 304, 0.6m extendable to 1.2m
  • Particulate Sampling 2 -30 lpm collection on thimble type filter up to 0.3 micron rating.
  • Gaseous Sampling 0.2 - 3 lpm collection in a set of Borosilicate glass impingers.
  • Rota meter Plastic body with 2% FSD
  • Accuracy 0 - 30 lpm for PM and 03 lpm for GAS.
  • Sampling Probe Made from SS 304 tube, 0.6 m length extendable to 1.2 m.
  • Filter Holder Fabricated from SS 304 tube suitable to hold either cellulose filtration
  • Nozzles A set of 3 stainless steel nozzles.
  • Digital Clock 0-60 minutes, 1 second readout with start and stop switches.
View Complete Details

ICP Spectrometer

  • Wavelength Range 165-870nm
  • Focal Length 380 mm
  • Analysis speed about 200 lines/min
  • Linear Dynamic Range (LDR) up to 100000 (Mn257.6nm, relative correlation > 0.999)
  • Accuracy RSD<0.5% (1-10ppm)
  • Repeatability RSD<1% at 2 hours (1-10ppm), RSD<2% at 8 hours (1-10ppm) -
  • Grating 52.91 L/mm, 64° sparkling, Zerodur
  • Incident seam 50mm, 100 mm
  • Optical resolution (FWHM) 7 pm at 200 nm
  • Pixel resolution 0.002nm
  • Detector Megapixel spill-resistant backside illuminated area array CCD
  • Detector readout noise 2.0 e-rms
  • RF Generator Power 750-1600w
  • Power Consumption <4.5kw
  • Warm-up time < 20 min
  • Operating temperature +10°C to +30°C
  • Storage temperature -20°C to +60°C
  • Operating humidity 20 to 80 % RH
  • Argon consumption 12 to 14 L/min at normal analysis
  • Argon purity requirements 100.00%
  • Argon inlet pressure > 0.6 MPa
  • Power supply requirements (220 ±10%) V AC, (50~60) Hz
  • Overall power consumption <4.5 kW
  • Size 935 mm (L) X 732 mm (W) X 659 mm (H)
View Complete Details

Handy Sampler

  • Flow Rate 0 - 3 Lpm
  • Timer 3 Digit Display In Minutes
  • Running Time 1 - 999 Min.
  • Delay Time 1 - 99 Min.
  • Power Supply 230+/-10v Ac, 50hz With Battery Charger And Rechargeable Batteries (2ah).
  • Operation Time 10 Hours With Full Charge, With Sampling Rate Of 1 Lpm.
  • Charge 15 Hours Or Less.
  • Features Battery Operated Pump Runs For A Full Shift Of 8 Hrs., Rechargeable, Maintenance Free Battery., Provision For The System To Operate Off The Mains Also., Digital Timer To Facilitate Unattended Operation.
View Complete Details

Gel Electrophoresis Systems

  • Number of gels 1-4
  • Handcast gels using VS10 Gel plate
  • Plate dimension: 10x10x0.2 cm (WxHxB)
  • Gel dimension: 8X8.5cm
  • Buffer volume for 2 gel 250-1200ml
  • Buffer volume for 4 gel 250-1200ml
  • Run time for SDS- PAGE (1-2 hr at from 90-225V)
  • 300V Electrophoresis power supply 230VAC, Dual output
View Complete Details

Laboratory Pulverizer

  • Disc Diameter 175mm.
  • Maximum Feed Size 8 Mm (Approx)
  • Size Of Finished Product 72 Mesh (212 Microns).
  • Movement Vertical Plane.
View Complete Details

Analytical Balance

  • Weighing capacity :
  • 220 g Readability
  • : 0.0001 g
  • Repeatability :
  • = ±0.0001 g Linearity
  • : = ±0.0002 g
  • Pan size :
  • 90 mm Power
  • : 110 V ± 10% 60Hz 10VA
  • Actual Dimensions :
View Complete Details

Auto Conductivity Temperature Meter

  • Display 16x2 LCD
  • Parameter Conductivity
  • Temperature Range
  • 0 to 200uS/cm, 0 to 2mS, 0 to 20mS , 0 to 200mS, 0 to 1000 mS/cm 0°C to 100°C
  • Resolution 0.1 .uS /cm
  • 0. 1°C Accuracy
  • ±0.5% ±1 digit. ±0.1°C ± 1 Digit
  • Temp .Compensation 0-100°C Manual & Automatic
  • Data Entry By soft touch keys
  • Input Resistance 10 ^12 ohms
  • Input Frequency 1000Hz
  • Cell Constant compensation Adjustable
  • Power Supply 230 V ±10%, 50 Hz AC. 12 VDC( Optional)
  • Ambient Temperature 10°C to 50°C
  • Dimensions (L x B x H)mm 270 x 202 x 80 mm. Weight: 1.0 Kgs
  • Accessories Conductivity Cell, Dust Cover, Instruction manual, Standard solutions.
View Complete Details

Digital Flame Photometer

  • Display 128 X 64 GRAPHICAL LCD DISPLAY
  • RESOLUTION 0.1PPM/ MEQ
  • REPRODUCIBILITY ± 2 % OF RANGE ± 1 DIGIT.
  • CURVE FIT ACCURACY ± 2 % OF RANGE ±1 DIGIT.
  • CALIBRATION UP TO 5-POINT CALIBRATION WITH CURVE FITTING SOFTWARE .
  • DETECTOR SILICON PHOTODIODE
  • FILTERS NA & K INCLUDED. LI & CA AT AN EXTRA COST
  • IGNITION AUTO IGNITION
  • GAS CONTROL FULLY ADJUSTABLE
  • ATOMIZER BLACK BACK ELITE , AXIAL FLOW TYPE
  • POWER SUPPLY 230 V + 10% AC, 50/60 HZ
  • DIGITAL OUTPUT RS 232 C PC SOFTWARE
  • DIMENSIONS 365 X 245 X 220 MM (L X B X H)(APPROX.), WEIGHT : 8 KGS
View Complete Details

MICRO PROCESSOR BASED PH METER

  • pH Range 0 To 14 Ph
  • Resolution 0.01 Ph
  • Calibration Auto As Manual, 3 Point / 2 Point (Programmable)
  • Resolution 1 Mv
  • Calibration Two Point Manual
  • Function Ph Or Mv & Temperature Simultaneously
  • Display Digital Led
  • Power Supply 230 V ± 10% 50 Hz Ac
  • Accuracy ± 0.01 Ph ± 1 Digit
  • Slope Adjustment 80% To 120% By Default 100%
  • Temp.Compensation 0 To 100 C Auto With Temp Probe / Manual With Keys
  • Auto Buffer Recognition 4.00 Ph, 7.00 Ph, 9.20 Ph
  • Mv Range -1999 Mv To +1999 Mv
  • Accuracy ± 0.1% ±1 Digit
  • Features Attractive Design, Accurate measurment, Optimum finish
View Complete Details

Bacteriological Incubator

  • Material Crc / Mild Steel With Powder Coated, S.S. Gate On Digital Model
  • Temperature Range Ambient To 70°C
  • Temperature Stability ± 1 °C Or Better
  • Control Panel With Mains & Load Indictor Mains Switch & Fan Switch, Temp. Controller
  • Optional Double Colour Gate Top & Panel (On Customer Request)
  • Digital Setting 0.1°C
  • Digital Resolution 0.1°C
  • Safety Function Temp Over Shoot High & Low Temp. Alarm
  • Optional Outer S. S. 304 Grade Body On Customer Demand
  • Interior Polish S. S. 304 Grade Sheet
  • Insulation Glasswool / Ceramic Blanket
  • Front Door Glasswool/ Mineral Wool Insulated Door With Glass Window
  • Power Consumption 220 /230v Ac Supply ± 10% 50 Hz
  • Duty Cycle Continuous
View Complete Details

COD Digestion Apparatus

  • Display Digital
  • Temperature Range Ambient to 200 Deg C
  • Resolution 0.1 Deg C
  • Control PID Controller
  • Heater Rating 1500 Watt/ 07 Amp/ 220 Volt
  • Sensor PT 100
  • Timer 999 min
  • Hole Size 6mm depth X 4mm die
  • Sample Volume 15 Sample
  • Block Dimension 280X165X70mm
  •    
View Complete Details

Sieve Shaker

  • Power AC 220V 125W
  • Weight 25 kg (without test sieves)
  • Model no AI-SS-174
  • Applications Separation, Fractioning, Particle Size Determination
  • Display Bright LED Display
  • Sieving Both Dry and Wet
  • Sieve Diameter 200
  • Vibration Frequency 1420 times/minute
  • Measuring Range 0.038 4mm
  • Mode Selection Continuous
  • Max. Batch / Feed Capacity 2 kg
  • Programmable Time 1 to 99 min
  • Vibration Amplitude < 5mm
  • Noise 50 DB
View Complete Details

Hot Air Oven

  • Material CRC/Mild Steel with Powder Coated, S.S. Gate
  • Display LCD display
  • Control Panel With Mains & Load Indicator, Fan Switch & Mains Switch, Temperature Controller
  • Temperature Rage Ambient to 250°C
  • Temperature Stability 1°C or Better.
  • Duty Cycle Continuous
  • Tray 04 NO
View Complete Details

Automatic Oxygen Calorimeter

  • Working Principle Isoperibol
  • Type of bomb Removable
  • Operating oxygen pressure 3-4 MPa (30 bars)
  • Measuring Range 500-10000 K.cal/Kg
  • Working Temperature 25° ± 5 ° C (Environment Controlled Conditions)
View Complete Details

Hardgrove Grindability Index Analyzer

  • Spindle Speed RPM: 20±1 r/min
  • Working Revolution:    60
  • Ball Diameter: 25.4±0.13 mm
  • Grinding Bowl Capacity: 50g
  • Operation On: 220/230V, 50/60Hz
  • Load Bearing Capacity: 284±2N
  • Feed Size: 0.63-1.25mm
  • Number of Grinding Balls: 8
  • Grinding balls MOC: Chrome Steel
View Complete Details

Microwave Digestion System

  • Microwave Frequency 2450 Mhz
  • Installed Microwave Power Construction: 1800 Watt
  • External Structure Mild Steel, Powder Coated
  • Internal Microwave Chamber 52 L, Corrosion Resistant Industrial Grade 316 Stainless Steel Chamber
  • Maximum Output Power 1300 W, Non-Pulsed Continuous Automatic Variable Frequency Control With An Increment Of 1 Watt
  • Temperature Measurement And Control System Measurement Is Adapted For Automatic Recognition And Intelligent Control Of Temperature From 0°C To 300°C ; Precision: +/- 1°C (Threshold Temperature- Ambient To 350°C)
  • Pressure Measurement & Control System Piezoelectric Crystal Pressure Sensor, Pressure Monitoring Range 0 - 6 Mpa
  • Main-Display Large (7") Wide-Format, Touch Screen
  • Software Versatile Software To Precisely Control And Adjust Microwave Power, Temperature To Ensure Complete Digestion Of The Sample Pre-Load Digestion Process Programs.
  • User Interface Icon Based Gui. Graphical Output. Real Time Status Display. Easy Setup
  • Memory 32 Gb Expandable Memory Helps User To Store Unlimited Programs
  • Safety Intelligent Overheat Cut-Off. System Cooling Malfunction Warning. Door Ajar Warning. (With Message And Buzzer)
  • Carousel Rotation Whole Set Of Digestion Vessel In Chamber Always And Continually Rotates In One Direction Ensuring Homogeneous Heating Of All The Vessel
  • Exhaust System Of Chamber Corrosion-Resistant Motor, With Air Rate Of 3.8 M3/Min
  • Outer Vessel Material Ultra Strength Composite Fiber, Acid Resistant Can Withstand High Pressure.
  • Inner Vessel Material Tfm Material Can Withstand High Temp & Pressure
  • Volume Of Vessel 100 Ml.
  • No. Of Vessel 06 Vessels
  • Operating Condition 5°C - 60ºc, 10%-90% Humidity, Non-Condensing
  • Operating Voltage & Current 220/240 Vac, Non-Fluctuating Supply 50/60 Hz, 15 Amp
  • Dimensions 452 Mm X 496 Mm X 598 Mm (Wxdxh)
  • Net Weight 38 Kgs
View Complete Details

Muffle Furnace

  • Control Panel Mains, Load Indicator , Digital Controller & Mains Indicator
  • Temperature Ranges Ambient to 1000°C , 1200
  • Temperature Stability ± 2°C or better
  • Duty Cycle Continuous Insulation : High Ceramic Blanket & Board Insulation Material : CRC / MS Sheet duly powder coated Interior : Ceramic Board & grooved Refractory Chamber as per Temp. Requirement
  • Power Consumption 220/230 AC 50Hz & 440V 3 Phase as customer size requirement
  • Optional RS 232
View Complete Details

Orbital Shaking Incubator

  • Inner Dim. (H x W x D) mm 550 x 550 x 550
  • Platform Size (inches) 18 x 18
  • Can accommodate flask (At a time) 12 Nos. of 250 ml to 500ml
  • Approx Volume (Liters) 165
  • Temperature Range +5°C to 60°C (Resolution 0.1°C)
  • Temp. Controller By Microprocessor Based PID Digital Temperature Indicator cum Controller
  • Shaking type Orbital
  • RPM Display Digital
  • Shaking Speed Variable speed from 20 RPM to 250 RPM
  • Temp. Display Digital LED Display for Set Value(SV) and Process Value (PV)
  • Air Circulation By forced convection System
  • Insulation By Glass Wool Insulation
  • Electric Supply 220/230V AC, 50/60Hz single phase
View Complete Details

Stability Chamber

  • Capacity 600 litre
  • Approx Volume Cuft
  • No. Of Shelves 4
  • Temperature Range 5°C To 60°C (Resolution 0.1°C)
  • Temperature Controller By Microprocessor Based PID Digital Temperature Indicator
  • Temp. Accuracy ±1°C
  • Humidity Range 40% To 98% At Cool Temperature
  • Humidity Accuracy ±3 To 5%RH.
  • Display LED Display
  • Relay Solid State Electronic Relay With Protective Heat Sink.
  • Air Circulation By Forced Convection System
  • Operations Nearly Sil Ent Operation With Ultra-Low Vibration
  • Voltage Indicator By Volt Meter Fitted On Panel
  • Electric Supply 220/230V AC, 50/60Hz
  • Computer Interface Yes
  • Water Sensor Yes
  • Humidity Sensor Yes
  • Heating And Cooling Temp. Sensor Yes
  • Alarm Yes
  • Display LED
  • Cooling System Yes
  • Heating System Yes
  • Humidity System Yes
  •    
View Complete Details

Abbes Refrectometer

  • Measuring Range 1.3000 to 1.7000
  • ND Range N.D.1.3000 to N.D. 1. 7000 in steps of 0.001
  • Sugar Percentage 0 to 95% in steps of 1 Division
  • Accuracy ±0.5%
  • Temptature Range - 0-50 º C
  •    
View Complete Details

Bio Safety Cabinet

  • Material Frame and Decorative Plate: cold-rolled steel with anti-bacteria power coating.
  • External Dimension (W×D×H) 1700×800×2295 mm
  • Internal Dimension (W×D×H) 1210×600×660 mm
  • Work Surface Height 750 mm
  • Max Opening 450 mm
  • Tested Opening Safety height 254 mm (10 inch)
  • Air flow Volume 90±20 Fpm (0.3-0.5 M/S)
  • Front Window Thickness >5 mm
  • HEPA Filter Two, 99.999% efficiency at 0.3 um
  • Filter Guard Type Aluminum alloy frame
  • Noise < 65 dB
  • Illumination > 1200 Lux
  • Display LCD/VFD Display
  • Waterproof Socket Two
  • Tap Water tap × 1, Gas tap × 4
  • Ground Resistance <0.10
  • Power Supply AC 240 V ± 10%, 50/60 Hz; 110 V ± 10%, 60 Hz,
  • Consumption 400 W
  • DC Motor One ECM motor, 110V & 240V acceptable, Speed adjustable
  • Body Working area: 304 stainless steel
  • UV Lamp 30 W Emission of 253.7 nanometers
View Complete Details

Fume Hood

  • Construction Double wall construction.
  • MOC Outer Material Should Be Chemical Resistant
  • Sash Vertical open with counter weight for easy adjustments.
  • Power option Power Supply : 1 Phase, AC 220 v, 50Hz
  • Power Consent With 6/16 Amp. socket
  • Sizes 1200 mm to 2000 mm wide/as per client requirement
  • Base Cabinet For Chemical Storage with One exhaust port.
  • Face Velocity minimum 60 fpm at sash full open condition.
  • Customization Yes, customization available suiting your needs.
  • HP motor 3 phase with air suction capacity of around 3000 CFM
  • Apparatus Holding Grid Acid Resistant Epoxy Grid
  • Sink PP sink each side
  • Work Top Thick Granite Top.
View Complete Details

Hot Plate

  • Temp upto 350 Deg C., With E.R.
  • Size 25 x 30 x 15 cm 1.2 KW
View Complete Details

Vertical Planetary Ball Mill

6.20 Lakh /Piece Get Latest Price
  • Brand Name AI Scientific
  • Weight 50 kg
  • Type Semi -Circle Type
  • Power Source AC110/220V+-10%, 50/60Hz
  • Features 3D curve shape design, Special gear with low noise
  • Country of Origin Made in India
  • Usage/Application Laboratory
  • Material Mild Steel
  • Capacity 400 ml
  • Size 250*125*280
  • Phase Single
  • Model Name/Number AI-VPB
  • Motor Power 0.25KW
  • Shell Rotation Speed 90-870rpm
  • Design Semi Circle
  • Volume 400 ml
  • I Deal In New Only
  • Assessories Zirconia/Agate/Tungsten/PTEF jar
View Complete Details

Orbital Shaker

  • Material Fabricated Assembly From Heavy Mild Steel (MS) Section Duly Paint/ Powder Coated.
  • Duty Cycle Continuous
  • Optional Digital RPM Meter With DC Drive
  • Power Consumption 220/230V AC Supply ± 10% Single Phase 50HZ
  • Capacity 25 Flask Of 250ml
View Complete Details

Respirable Dust Sampler

  • Flow Rate 0.8 To 1.5 M3/Min
  • Particle Size Up To 10 Micron Collected On Filter And SPM Bigger Than 10 Micron Collected In A Separate Collector Cup Blower Continuous Duty Blower With Brushless Blower Recommended Filter GF/A(8" X 10") For Common Use,
  • Time Record 0 To 9999.99 Hrs.
  • Power Requirement 220 Volts, Single Phase AC
View Complete Details

Gel Documentation System

  • Light Source UV, LED
  • Lens 15mm ~45mm lens, F1.8 (W) - F11.0 (T)
  • Video Output NTSC/PAL selectable (HDMI)
  • Storage Media SD, SDH Cmemory card
  • Power DC12V / 2A adapter
  • View Size (mm) 80 (D)* 150 (W)
  • Wavelength (nm) 302nm, 470 nm
  • Compatible gel size(mm) 50*60 , 105*60, 125*60
  • Camera Canon: M-Series Type
  • Effective Pixel 18.5 Megapixels
  • LCD Size 3" TFT Color
  • Mode (P), (A), (S), (M)
  • Shutter Speed(s) 1/4000~30second
  • Interface USB(v.2.0), Wi-Fi
  • Storage Format JPEG(ExifVer2.3), RAW
View Complete Details

Micro Volume Spectrophotometer

  • Light Source Xenon flash lamp
  • Measurement Sample Size 2 ul
  • Measurement Data Output (A)OD230nm, OD260nm, OD280nm, OD320nm (B)Sample concentration (ng/ul) (C)OD260nm/OD230nm, OD260nm/OD280nm
  • Minimum Concentration 2 ng/ul (dsDNA)
  • Maximum Concentration 2, 000 ng/ul (dsDNA)
  • Absorbance Range (10mm) 0.04 ~ 40 ~0.5 mm
  • Pathlength ~0.5 mm
  • Measurement Time < 5 sec Android OS (ver. 4.4.3)
  • Operation System Android OS (ver. 4.4.3)
  • Internal Storage 32 GB
  •    
View Complete Details

High Performance Liquid Chromatograph

  • Wavelength Range 190-900 nm
  • Data collection rate up to 50Hz
  • Light Source Deuterium lamp & tungsten lamp
  • Noise level < ±0.35 X 10-5 AU , 254 nm, dry cell
  • Drift < 1 X 10-4 AU/hr
  • Bandwidth 5 nm
  • Wavelength Accuracy ±1 nm
  • Wavelength Precision ±0.1 nm
  • Linearity >99.5 % for 2.5 AU (acetone, 254 nm)
  • Path Length 10 mm ( Analytical cell ) / 3 mm ( Semi-prep cell )
  • Cell Volume 10 µL ( Analytical cell ) / 5 µL ( Semi-prep cell )
  •    
View Complete Details

Autoclave

  • Pressure Range 5 to 20PSI ± 3PSI
  • Temperature Range 120°C appox. At 15 20PSI appox.
  • Power Consumption 220 /230 V AC ± 10% Single Phase 50Hz
  • Control Panel Temp. / Pressure Indicator, Pressure Switch,
  • Optional Timer 0-60minute
View Complete Details

Ash Fusion Tester

  • Furnace Temperature Range 0°C - 1450°C
  • Temperature Controlling Accuracy < 5°C
  • Resolution 1°C
  • Sample Quantity 5 samples each time
  • Temperature Rising Speed Comply with national standard.
  • Laboratory Atmosphere Oxidability or weak reducibility
  • Power Supply 220V, 50/60HZ
  • Maximum Power < 5KW
  • Cabinet Dimension 850mm×400mm×600 mm
View Complete Details

Fine Particulate Sampler

  • Particle Size Omni directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS impactor
  • Sampling Rate Constant sampling rate of 1m3/hr unaffected by voltage fluctuation and filter maintained by critical orifice system
  • Filter Media Filter holder designed to hold any standard 47mm dia filter
  • Sample Volume Dry Gas meter records the total air volume sampled
  • Power requirement Single phase AC 220 volts, 50 Hz
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Abdul Qayyum (Amaze Instruments)
  • Plot No. E-49, Sector-6 Noida - 201301, Gautam Budh Nagar, Uttar Pradesh, India, Asola, Delhi
  • Share us via
  • Call 08069182190 Ext. 515
Browse Our Products list of Amaze Instruments Noida, Delhi
Post Buy Requirement
AI
Noida, Delhi, India
Add Review

Our Products #4754592

Centrifuge

  • Max.RPM 5250
  • Max.RCF 3900
  • MAx.Capacity 400ml
  • Head R-81-A
  • Size 12 x 150ml
  • W x Dx H. 365 x 415 x 305mm
View Complete Details

Digital Turbidity Meter

  • Light Source LED 3V, 0.3 Amp.
  • Parameter Turbidity
  • Range 0 to 1000.0 NTU
  • Resolution 1 NTU
  • Accuracy ±3 %(FS) ±1 digit ( 0 to 400JTU) + 4% (FS)+1 digit (401 to 1000JTU)
  • Sample System 30mm clear Glass test tube
  • Calibration Manual
  • Indication: 3 ½ digit LED 3 ½ digit LED (12.5mmhigh).
  • Detector Photodiode
  • Power Supply 230 V ±10%, 50 Hz AC.
  • Dimensions (L x B x H)mm 275 x 195 x 105 mm. Weight: 3 kgs
  • Accessories Test tube , Dust Cover, Instruction manual etc.
View Complete Details

Heating Mantle

  • Temperature up to 350 °C.
  • Flask Capacity 2000 ml
  •    
View Complete Details

Polarimeter

  • Measurement Range Of +130° To -30°
  • Vernier Accuracy 0.1°(I.S.S.)
  • Telescopic Magnification 4.5x
  • Least Count 0.01º
  • Analyzer Glens Thompson Prisms, Polarizer Half Shade, Polarizing System Aperture 6 Mm
  • Light Source Arrangement For 35watt Sodium Vapour Lamp Light Source Input
  • Tube Borosil Glass Tube 200mm Cut Type 220v+10% Vac
View Complete Details

Stack Sampler

  • Stack Temp Range Ambient to 600 deg C on a Digital Pyrometer.
  • Stack Velocity Range 3 to 60 m/sec
  • Thermocouple T/C sensor
  • SS 304 casing, length of insertion 0.6 m with 2m long cable.
  • Manometer Digital with 01300 mm of H2O range
  • Pitot Tube Calibrated S type fabricated SS 304, 0.6m extendable to 1.2m
  • Particulate Sampling 2 -30 lpm collection on thimble type filter up to 0.3 micron rating.
  • Gaseous Sampling 0.2 - 3 lpm collection in a set of Borosilicate glass impingers.
  • Rota meter Plastic body with 2% FSD
  • Accuracy 0 - 30 lpm for PM and 03 lpm for GAS.
  • Sampling Probe Made from SS 304 tube, 0.6 m length extendable to 1.2 m.
  • Filter Holder Fabricated from SS 304 tube suitable to hold either cellulose filtration
  • Nozzles A set of 3 stainless steel nozzles.
  • Digital Clock 0-60 minutes, 1 second readout with start and stop switches.
View Complete Details

ICP Spectrometer

  • Wavelength Range 165-870nm
  • Focal Length 380 mm
  • Analysis speed about 200 lines/min
  • Linear Dynamic Range (LDR) up to 100000 (Mn257.6nm, relative correlation > 0.999)
  • Accuracy RSD<0.5% (1-10ppm)
  • Repeatability RSD<1% at 2 hours (1-10ppm), RSD<2% at 8 hours (1-10ppm) -
  • Grating 52.91 L/mm, 64° sparkling, Zerodur
  • Incident seam 50mm, 100 mm
  • Optical resolution (FWHM) 7 pm at 200 nm
  • Pixel resolution 0.002nm
  • Detector Megapixel spill-resistant backside illuminated area array CCD
  • Detector readout noise 2.0 e-rms
  • RF Generator Power 750-1600w
  • Power Consumption <4.5kw
  • Warm-up time < 20 min
  • Operating temperature +10°C to +30°C
  • Storage temperature -20°C to +60°C
  • Operating humidity 20 to 80 % RH
  • Argon consumption 12 to 14 L/min at normal analysis
  • Argon purity requirements 100.00%
  • Argon inlet pressure > 0.6 MPa
  • Power supply requirements (220 ±10%) V AC, (50~60) Hz
  • Overall power consumption <4.5 kW
  • Size 935 mm (L) X 732 mm (W) X 659 mm (H)
View Complete Details

Handy Sampler

  • Flow Rate 0 - 3 Lpm
  • Timer 3 Digit Display In Minutes
  • Running Time 1 - 999 Min.
  • Delay Time 1 - 99 Min.
  • Power Supply 230+/-10v Ac, 50hz With Battery Charger And Rechargeable Batteries (2ah).
  • Operation Time 10 Hours With Full Charge, With Sampling Rate Of 1 Lpm.
  • Charge 15 Hours Or Less.
  • Features Battery Operated Pump Runs For A Full Shift Of 8 Hrs., Rechargeable, Maintenance Free Battery., Provision For The System To Operate Off The Mains Also., Digital Timer To Facilitate Unattended Operation.
View Complete Details

Gel Electrophoresis Systems

  • Number of gels 1-4
  • Handcast gels using VS10 Gel plate
  • Plate dimension: 10x10x0.2 cm (WxHxB)
  • Gel dimension: 8X8.5cm
  • Buffer volume for 2 gel 250-1200ml
  • Buffer volume for 4 gel 250-1200ml
  • Run time for SDS- PAGE (1-2 hr at from 90-225V)
  • 300V Electrophoresis power supply 230VAC, Dual output
View Complete Details

Laboratory Pulverizer

  • Disc Diameter 175mm.
  • Maximum Feed Size 8 Mm (Approx)
  • Size Of Finished Product 72 Mesh (212 Microns).
  • Movement Vertical Plane.
View Complete Details

Analytical Balance

  • Weighing capacity :
  • 220 g Readability
  • : 0.0001 g
  • Repeatability :
  • = ±0.0001 g Linearity
  • : = ±0.0002 g
  • Pan size :
  • 90 mm Power
  • : 110 V ± 10% 60Hz 10VA
  • Actual Dimensions :
View Complete Details

Auto Conductivity Temperature Meter

  • Display 16x2 LCD
  • Parameter Conductivity
  • Temperature Range
  • 0 to 200uS/cm, 0 to 2mS, 0 to 20mS , 0 to 200mS, 0 to 1000 mS/cm 0°C to 100°C
  • Resolution 0.1 .uS /cm
  • 0. 1°C Accuracy
  • ±0.5% ±1 digit. ±0.1°C ± 1 Digit
  • Temp .Compensation 0-100°C Manual & Automatic
  • Data Entry By soft touch keys
  • Input Resistance 10 ^12 ohms
  • Input Frequency 1000Hz
  • Cell Constant compensation Adjustable
  • Power Supply 230 V ±10%, 50 Hz AC. 12 VDC( Optional)
  • Ambient Temperature 10°C to 50°C
  • Dimensions (L x B x H)mm 270 x 202 x 80 mm. Weight: 1.0 Kgs
  • Accessories Conductivity Cell, Dust Cover, Instruction manual, Standard solutions.
View Complete Details

Digital Flame Photometer

  • Display 128 X 64 GRAPHICAL LCD DISPLAY
  • RESOLUTION 0.1PPM/ MEQ
  • REPRODUCIBILITY ± 2 % OF RANGE ± 1 DIGIT.
  • CURVE FIT ACCURACY ± 2 % OF RANGE ±1 DIGIT.
  • CALIBRATION UP TO 5-POINT CALIBRATION WITH CURVE FITTING SOFTWARE .
  • DETECTOR SILICON PHOTODIODE
  • FILTERS NA & K INCLUDED. LI & CA AT AN EXTRA COST
  • IGNITION AUTO IGNITION
  • GAS CONTROL FULLY ADJUSTABLE
  • ATOMIZER BLACK BACK ELITE , AXIAL FLOW TYPE
  • POWER SUPPLY 230 V + 10% AC, 50/60 HZ
  • DIGITAL OUTPUT RS 232 C PC SOFTWARE
  • DIMENSIONS 365 X 245 X 220 MM (L X B X H)(APPROX.), WEIGHT : 8 KGS
View Complete Details

MICRO PROCESSOR BASED PH METER

  • pH Range 0 To 14 Ph
  • Resolution 0.01 Ph
  • Calibration Auto As Manual, 3 Point / 2 Point (Programmable)
  • Resolution 1 Mv
  • Calibration Two Point Manual
  • Function Ph Or Mv & Temperature Simultaneously
  • Display Digital Led
  • Power Supply 230 V ± 10% 50 Hz Ac
  • Accuracy ± 0.01 Ph ± 1 Digit
  • Slope Adjustment 80% To 120% By Default 100%
  • Temp.Compensation 0 To 100 C Auto With Temp Probe / Manual With Keys
  • Auto Buffer Recognition 4.00 Ph, 7.00 Ph, 9.20 Ph
  • Mv Range -1999 Mv To +1999 Mv
  • Accuracy ± 0.1% ±1 Digit
  • Features Attractive Design, Accurate measurment, Optimum finish
View Complete Details

Bacteriological Incubator

  • Material Crc / Mild Steel With Powder Coated, S.S. Gate On Digital Model
  • Temperature Range Ambient To 70°C
  • Temperature Stability ± 1 °C Or Better
  • Control Panel With Mains & Load Indictor Mains Switch & Fan Switch, Temp. Controller
  • Optional Double Colour Gate Top & Panel (On Customer Request)
  • Digital Setting 0.1°C
  • Digital Resolution 0.1°C
  • Safety Function Temp Over Shoot High & Low Temp. Alarm
  • Optional Outer S. S. 304 Grade Body On Customer Demand
  • Interior Polish S. S. 304 Grade Sheet
  • Insulation Glasswool / Ceramic Blanket
  • Front Door Glasswool/ Mineral Wool Insulated Door With Glass Window
  • Power Consumption 220 /230v Ac Supply ± 10% 50 Hz
  • Duty Cycle Continuous
View Complete Details

COD Digestion Apparatus

  • Display Digital
  • Temperature Range Ambient to 200 Deg C
  • Resolution 0.1 Deg C
  • Control PID Controller
  • Heater Rating 1500 Watt/ 07 Amp/ 220 Volt
  • Sensor PT 100
  • Timer 999 min
  • Hole Size 6mm depth X 4mm die
  • Sample Volume 15 Sample
  • Block Dimension 280X165X70mm
  •    
View Complete Details

Sieve Shaker

  • Power AC 220V 125W
  • Weight 25 kg (without test sieves)
  • Model no AI-SS-174
  • Applications Separation, Fractioning, Particle Size Determination
  • Display Bright LED Display
  • Sieving Both Dry and Wet
  • Sieve Diameter 200
  • Vibration Frequency 1420 times/minute
  • Measuring Range 0.038 4mm
  • Mode Selection Continuous
  • Max. Batch / Feed Capacity 2 kg
  • Programmable Time 1 to 99 min
  • Vibration Amplitude < 5mm
  • Noise 50 DB
View Complete Details

Hot Air Oven

  • Material CRC/Mild Steel with Powder Coated, S.S. Gate
  • Display LCD display
  • Control Panel With Mains & Load Indicator, Fan Switch & Mains Switch, Temperature Controller
  • Temperature Rage Ambient to 250°C
  • Temperature Stability 1°C or Better.
  • Duty Cycle Continuous
  • Tray 04 NO
View Complete Details

Automatic Oxygen Calorimeter

  • Working Principle Isoperibol
  • Type of bomb Removable
  • Operating oxygen pressure 3-4 MPa (30 bars)
  • Measuring Range 500-10000 K.cal/Kg
  • Working Temperature 25° ± 5 ° C (Environment Controlled Conditions)
View Complete Details

Hardgrove Grindability Index Analyzer

  • Spindle Speed RPM: 20±1 r/min
  • Working Revolution:    60
  • Ball Diameter: 25.4±0.13 mm
  • Grinding Bowl Capacity: 50g
  • Operation On: 220/230V, 50/60Hz
  • Load Bearing Capacity: 284±2N
  • Feed Size: 0.63-1.25mm
  • Number of Grinding Balls: 8
  • Grinding balls MOC: Chrome Steel
View Complete Details

Microwave Digestion System

  • Microwave Frequency 2450 Mhz
  • Installed Microwave Power Construction: 1800 Watt
  • External Structure Mild Steel, Powder Coated
  • Internal Microwave Chamber 52 L, Corrosion Resistant Industrial Grade 316 Stainless Steel Chamber
  • Maximum Output Power 1300 W, Non-Pulsed Continuous Automatic Variable Frequency Control With An Increment Of 1 Watt
  • Temperature Measurement And Control System Measurement Is Adapted For Automatic Recognition And Intelligent Control Of Temperature From 0°C To 300°C ; Precision: +/- 1°C (Threshold Temperature- Ambient To 350°C)
  • Pressure Measurement & Control System Piezoelectric Crystal Pressure Sensor, Pressure Monitoring Range 0 - 6 Mpa
  • Main-Display Large (7") Wide-Format, Touch Screen
  • Software Versatile Software To Precisely Control And Adjust Microwave Power, Temperature To Ensure Complete Digestion Of The Sample Pre-Load Digestion Process Programs.
  • User Interface Icon Based Gui. Graphical Output. Real Time Status Display. Easy Setup
  • Memory 32 Gb Expandable Memory Helps User To Store Unlimited Programs
  • Safety Intelligent Overheat Cut-Off. System Cooling Malfunction Warning. Door Ajar Warning. (With Message And Buzzer)
  • Carousel Rotation Whole Set Of Digestion Vessel In Chamber Always And Continually Rotates In One Direction Ensuring Homogeneous Heating Of All The Vessel
  • Exhaust System Of Chamber Corrosion-Resistant Motor, With Air Rate Of 3.8 M3/Min
  • Outer Vessel Material Ultra Strength Composite Fiber, Acid Resistant Can Withstand High Pressure.
  • Inner Vessel Material Tfm Material Can Withstand High Temp & Pressure
  • Volume Of Vessel 100 Ml.
  • No. Of Vessel 06 Vessels
  • Operating Condition 5°C - 60ºc, 10%-90% Humidity, Non-Condensing
  • Operating Voltage & Current 220/240 Vac, Non-Fluctuating Supply 50/60 Hz, 15 Amp
  • Dimensions 452 Mm X 496 Mm X 598 Mm (Wxdxh)
  • Net Weight 38 Kgs
View Complete Details

Muffle Furnace

  • Control Panel Mains, Load Indicator , Digital Controller & Mains Indicator
  • Temperature Ranges Ambient to 1000°C , 1200
  • Temperature Stability ± 2°C or better
  • Duty Cycle Continuous Insulation : High Ceramic Blanket & Board Insulation Material : CRC / MS Sheet duly powder coated Interior : Ceramic Board & grooved Refractory Chamber as per Temp. Requirement
  • Power Consumption 220/230 AC 50Hz & 440V 3 Phase as customer size requirement
  • Optional RS 232
View Complete Details

Orbital Shaking Incubator

  • Inner Dim. (H x W x D) mm 550 x 550 x 550
  • Platform Size (inches) 18 x 18
  • Can accommodate flask (At a time) 12 Nos. of 250 ml to 500ml
  • Approx Volume (Liters) 165
  • Temperature Range +5°C to 60°C (Resolution 0.1°C)
  • Temp. Controller By Microprocessor Based PID Digital Temperature Indicator cum Controller
  • Shaking type Orbital
  • RPM Display Digital
  • Shaking Speed Variable speed from 20 RPM to 250 RPM
  • Temp. Display Digital LED Display for Set Value(SV) and Process Value (PV)
  • Air Circulation By forced convection System
  • Insulation By Glass Wool Insulation
  • Electric Supply 220/230V AC, 50/60Hz single phase
View Complete Details

Stability Chamber

  • Capacity 600 litre
  • Approx Volume Cuft
  • No. Of Shelves 4
  • Temperature Range 5°C To 60°C (Resolution 0.1°C)
  • Temperature Controller By Microprocessor Based PID Digital Temperature Indicator
  • Temp. Accuracy ±1°C
  • Humidity Range 40% To 98% At Cool Temperature
  • Humidity Accuracy ±3 To 5%RH.
  • Display LED Display
  • Relay Solid State Electronic Relay With Protective Heat Sink.
  • Air Circulation By Forced Convection System
  • Operations Nearly Sil Ent Operation With Ultra-Low Vibration
  • Voltage Indicator By Volt Meter Fitted On Panel
  • Electric Supply 220/230V AC, 50/60Hz
  • Computer Interface Yes
  • Water Sensor Yes
  • Humidity Sensor Yes
  • Heating And Cooling Temp. Sensor Yes
  • Alarm Yes
  • Display LED
  • Cooling System Yes
  • Heating System Yes
  • Humidity System Yes
  •    
View Complete Details

Abbes Refrectometer

  • Measuring Range 1.3000 to 1.7000
  • ND Range N.D.1.3000 to N.D. 1. 7000 in steps of 0.001
  • Sugar Percentage 0 to 95% in steps of 1 Division
  • Accuracy ±0.5%
  • Temptature Range - 0-50 º C
  •    
View Complete Details

Bio Safety Cabinet

  • Material Frame and Decorative Plate: cold-rolled steel with anti-bacteria power coating.
  • External Dimension (W×D×H) 1700×800×2295 mm
  • Internal Dimension (W×D×H) 1210×600×660 mm
  • Work Surface Height 750 mm
  • Max Opening 450 mm
  • Tested Opening Safety height 254 mm (10 inch)
  • Air flow Volume 90±20 Fpm (0.3-0.5 M/S)
  • Front Window Thickness >5 mm
  • HEPA Filter Two, 99.999% efficiency at 0.3 um
  • Filter Guard Type Aluminum alloy frame
  • Noise < 65 dB
  • Illumination > 1200 Lux
  • Display LCD/VFD Display
  • Waterproof Socket Two
  • Tap Water tap × 1, Gas tap × 4
  • Ground Resistance <0.10
  • Power Supply AC 240 V ± 10%, 50/60 Hz; 110 V ± 10%, 60 Hz,
  • Consumption 400 W
  • DC Motor One ECM motor, 110V & 240V acceptable, Speed adjustable
  • Body Working area: 304 stainless steel
  • UV Lamp 30 W Emission of 253.7 nanometers
View Complete Details

Fume Hood

  • Construction Double wall construction.
  • MOC Outer Material Should Be Chemical Resistant
  • Sash Vertical open with counter weight for easy adjustments.
  • Power option Power Supply : 1 Phase, AC 220 v, 50Hz
  • Power Consent With 6/16 Amp. socket
  • Sizes 1200 mm to 2000 mm wide/as per client requirement
  • Base Cabinet For Chemical Storage with One exhaust port.
  • Face Velocity minimum 60 fpm at sash full open condition.
  • Customization Yes, customization available suiting your needs.
  • HP motor 3 phase with air suction capacity of around 3000 CFM
  • Apparatus Holding Grid Acid Resistant Epoxy Grid
  • Sink PP sink each side
  • Work Top Thick Granite Top.
View Complete Details

Hot Plate

  • Temp upto 350 Deg C., With E.R.
  • Size 25 x 30 x 15 cm 1.2 KW
View Complete Details

Vertical Planetary Ball Mill

6.20 Lakh /Piece Get Latest Price
  • Brand Name AI Scientific
  • Weight 50 kg
  • Type Semi -Circle Type
  • Power Source AC110/220V+-10%, 50/60Hz
  • Features 3D curve shape design, Special gear with low noise
  • Country of Origin Made in India
  • Usage/Application Laboratory
  • Material Mild Steel
  • Capacity 400 ml
  • Size 250*125*280
  • Phase Single
  • Model Name/Number AI-VPB
  • Motor Power 0.25KW
  • Shell Rotation Speed 90-870rpm
  • Design Semi Circle
  • Volume 400 ml
  • I Deal In New Only
  • Assessories Zirconia/Agate/Tungsten/PTEF jar
View Complete Details

Orbital Shaker

  • Material Fabricated Assembly From Heavy Mild Steel (MS) Section Duly Paint/ Powder Coated.
  • Duty Cycle Continuous
  • Optional Digital RPM Meter With DC Drive
  • Power Consumption 220/230V AC Supply ± 10% Single Phase 50HZ
  • Capacity 25 Flask Of 250ml
View Complete Details

Respirable Dust Sampler

  • Flow Rate 0.8 To 1.5 M3/Min
  • Particle Size Up To 10 Micron Collected On Filter And SPM Bigger Than 10 Micron Collected In A Separate Collector Cup Blower Continuous Duty Blower With Brushless Blower Recommended Filter GF/A(8" X 10") For Common Use,
  • Time Record 0 To 9999.99 Hrs.
  • Power Requirement 220 Volts, Single Phase AC
View Complete Details

Gel Documentation System

  • Light Source UV, LED
  • Lens 15mm ~45mm lens, F1.8 (W) - F11.0 (T)
  • Video Output NTSC/PAL selectable (HDMI)
  • Storage Media SD, SDH Cmemory card
  • Power DC12V / 2A adapter
  • View Size (mm) 80 (D)* 150 (W)
  • Wavelength (nm) 302nm, 470 nm
  • Compatible gel size(mm) 50*60 , 105*60, 125*60
  • Camera Canon: M-Series Type
  • Effective Pixel 18.5 Megapixels
  • LCD Size 3" TFT Color
  • Mode (P), (A), (S), (M)
  • Shutter Speed(s) 1/4000~30second
  • Interface USB(v.2.0), Wi-Fi
  • Storage Format JPEG(ExifVer2.3), RAW
View Complete Details

Micro Volume Spectrophotometer

  • Light Source Xenon flash lamp
  • Measurement Sample Size 2 ul
  • Measurement Data Output (A)OD230nm, OD260nm, OD280nm, OD320nm (B)Sample concentration (ng/ul) (C)OD260nm/OD230nm, OD260nm/OD280nm
  • Minimum Concentration 2 ng/ul (dsDNA)
  • Maximum Concentration 2, 000 ng/ul (dsDNA)
  • Absorbance Range (10mm) 0.04 ~ 40 ~0.5 mm
  • Pathlength ~0.5 mm
  • Measurement Time < 5 sec Android OS (ver. 4.4.3)
  • Operation System Android OS (ver. 4.4.3)
  • Internal Storage 32 GB
  •    
View Complete Details

High Performance Liquid Chromatograph

  • Wavelength Range 190-900 nm
  • Data collection rate up to 50Hz
  • Light Source Deuterium lamp & tungsten lamp
  • Noise level < ±0.35 X 10-5 AU , 254 nm, dry cell
  • Drift < 1 X 10-4 AU/hr
  • Bandwidth 5 nm
  • Wavelength Accuracy ±1 nm
  • Wavelength Precision ±0.1 nm
  • Linearity >99.5 % for 2.5 AU (acetone, 254 nm)
  • Path Length 10 mm ( Analytical cell ) / 3 mm ( Semi-prep cell )
  • Cell Volume 10 µL ( Analytical cell ) / 5 µL ( Semi-prep cell )
  •    
View Complete Details

Autoclave

  • Pressure Range 5 to 20PSI ± 3PSI
  • Temperature Range 120°C appox. At 15 20PSI appox.
  • Power Consumption 220 /230 V AC ± 10% Single Phase 50Hz
  • Control Panel Temp. / Pressure Indicator, Pressure Switch,
  • Optional Timer 0-60minute
View Complete Details

Ash Fusion Tester

  • Furnace Temperature Range 0°C - 1450°C
  • Temperature Controlling Accuracy < 5°C
  • Resolution 1°C
  • Sample Quantity 5 samples each time
  • Temperature Rising Speed Comply with national standard.
  • Laboratory Atmosphere Oxidability or weak reducibility
  • Power Supply 220V, 50/60HZ
  • Maximum Power < 5KW
  • Cabinet Dimension 850mm×400mm×600 mm
View Complete Details

Fine Particulate Sampler

  • Particle Size Omni directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS impactor
  • Sampling Rate Constant sampling rate of 1m3/hr unaffected by voltage fluctuation and filter maintained by critical orifice system
  • Filter Media Filter holder designed to hold any standard 47mm dia filter
  • Sample Volume Dry Gas meter records the total air volume sampled
  • Power requirement Single phase AC 220 volts, 50 Hz
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Abdul Qayyum (Amaze Instruments)
  • Plot No. E-49, Sector-6 Noida - 201301, Gautam Budh Nagar, Uttar Pradesh, India, Delhi
  • Share us via
  • Call 08069182190 Ext. 515