The AMP-100 or AMP 150 are used with AEP-700 Motorized Engine operated Pumping unit which is very fast & efficiant in operationand has been developed as per international standards, assembled with imported parts.It is pre set to a maximum pressure of 700 bar.It is connected with the press head AMP-100 or AMP-150 through high pressure hose set with quick release couplings for easy fixing & removal of the hose set.The Machine is useful for all Cable & conductor Jointing purpose.The Power Pack or Motorized Pumping unit (AEP-700) is useful for all site operation of cutters, Bolt tensioner, Hydraulic jacks & other portable tools for rescue operation etc.

Amico Hydraulic Conductor cutter is manufactured in callobration with Taiwan based company. The cutter is suitable for cutting various ferrous/non ferrous metal rods, ASCR conductors, E Wires etc.The cutter is very handy weighs only 5Kgs (approx), requires minimum maintenance & requires no setup time. It cuts with speed and is easy to carry at site. Blades are easy replaceable. Flip top latch for easy insertion of cutting material. The conductor/ E wires can now be easily be cut on tower cross arm etc. without requiring a platform.

Amico manually operated Hydraulic Compressor is used form a k ing compression joint on all AAC/ACSR Conductor & E.Wired etc. Its a compact machine comprising of cylinder5 block & pumping unit. A centrally mounded pressured gauge is provided to record load during compression. A built in safety valve is provided to check overloading beyond set limit. The unit as a whole is mounted on a sturdy steel fabricated frame with safety handled.

Amico manually Hydraulic compressor is the latest version designed on International standards to attain 100 Ton on just 700 bar pressure, Ram dia of the machine has been increased to 135 mm. Hence lessor operating fatigue & low chance of leakage.

This is light weight measuring Instrument used for measuring load/tension. The instrument is available from 1 ton to 20 Ton range in both direct reading type dial & digital versions to the accuracy of + - 1%. It is totally sealed unit with swivel hook at the one end & a fixed hook at the other, The Instrument is supplied in a steel carrying case.

suitable to lift and hold conductor Drums during Tension Stringing
Capacity of 8 Tons
Body made of forged welded steel section with protective coating or paint
Suitable for use with Wooden Or Steel conductor Drums with traverse width ranging from 700mm to 1300mm for Tension Stringing

winch machine double capstan
motorized power winch machines are highly useful for pulling and lifting operation with much more convenience and ease in work compared to other heavy vehicles commonly used for the same purpose.this portable unit consists of engine unit, gear unit and capstan/bull wheel made of cast steel.

winch machine double capstan main features are as below:
> light weight, mobile and easy transport by works at site.> can also be used at hilly terrain where tractor and crane are not accessible & feasible to use.> supplied with standard honda gx series of gasoline engines (diesel mode is available on request).> with anti-fall type protective mechanism to avoid release of load in working condition.> available in 3 ton and 5 ton capacity in single and double capstan configuration (we also supply detachable type configuration and specification of the same can be provided on request)

The most compact and easy to use machine in it's range, Amico HC-100
hydraulic hose crimping machine can be operated even by an unskilled operator.

Features:

> Easy to operate
> Easy to change dies
> High crimping force
> Accuracy of 0.05
> Compact design

>The attach pum is with double speed system which ables compression & shorten the compression time.
> The head is roatteable 180 degree freely to work in narrow space.
> The pump is fitted with safety valve which releases the pressure automatically to prevent overloading.
> Fibre glass insulated handles are provided to prevent accidental shock.

> Simple manual hydraulic operation with single Plunger dual action
> Completely manual hydraulic operation so external power is not needed.
> with or without rotating stand locks in three positions for stability and versatility.
> Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe.
> Different standard bending dies included (1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2 1/2", 3", 4 & 5).
> Useful for bending Aluminum Bus Bars up to 120mm diameter with thickness of up to 12 mm.

Sag Scope is used to observe the sagging operation and measure the sag level presisely
Zoom type Sag Scope
Monocular
Optical Magnification factor of 4.0
Can be mounted on steel angles with triangle ranging
from 56 degrees to 125 degrees

The AMP-100 or AMP 150 are used with AEP-700 Motorized Engine operated Pumping unit which is very fast & efficiant in operationand has been developed as per international standards, assembled with imported parts.It is pre set to a maximum pressure of 700 bar.It is connected with the press head AMP-100 or AMP-150 through high pressure hose set with quick release couplings for easy fixing & removal of the hose set.The Machine is useful for all Cable & conductor Jointing purpose.The Power Pack or Motorized Pumping unit (AEP-700) is useful for all site operation of cutters, Bolt tensioner, Hydraulic jacks & other portable tools for rescue operation etc.

Amico Hydraulic Conductor cutter is manufactured in callobration with Taiwan based company. The cutter is suitable for cutting various ferrous/non ferrous metal rods, ASCR conductors, E Wires etc.The cutter is very handy weighs only 5Kgs (approx), requires minimum maintenance & requires no setup time. It cuts with speed and is easy to carry at site. Blades are easy replaceable. Flip top latch for easy insertion of cutting material. The conductor/ E wires can now be easily be cut on tower cross arm etc. without requiring a platform.

Amico manually operated Hydraulic Compressor is used form a k ing compression joint on all AAC/ACSR Conductor & E.Wired etc. Its a compact machine comprising of cylinder5 block & pumping unit. A centrally mounded pressured gauge is provided to record load during compression. A built in safety valve is provided to check overloading beyond set limit. The unit as a whole is mounted on a sturdy steel fabricated frame with safety handled.

Amico manually Hydraulic compressor is the latest version designed on International standards to attain 100 Ton on just 700 bar pressure, Ram dia of the machine has been increased to 135 mm. Hence lessor operating fatigue & low chance of leakage.

This is light weight measuring Instrument used for measuring load/tension. The instrument is available from 1 ton to 20 Ton range in both direct reading type dial & digital versions to the accuracy of + - 1%. It is totally sealed unit with swivel hook at the one end & a fixed hook at the other, The Instrument is supplied in a steel carrying case.

suitable to lift and hold conductor Drums during Tension Stringing
Capacity of 8 Tons
Body made of forged welded steel section with protective coating or paint
Suitable for use with Wooden Or Steel conductor Drums with traverse width ranging from 700mm to 1300mm for Tension Stringing

winch machine double capstan
motorized power winch machines are highly useful for pulling and lifting operation with much more convenience and ease in work compared to other heavy vehicles commonly used for the same purpose.this portable unit consists of engine unit, gear unit and capstan/bull wheel made of cast steel.

winch machine double capstan main features are as below:
> light weight, mobile and easy transport by works at site.> can also be used at hilly terrain where tractor and crane are not accessible & feasible to use.> supplied with standard honda gx series of gasoline engines (diesel mode is available on request).> with anti-fall type protective mechanism to avoid release of load in working condition.> available in 3 ton and 5 ton capacity in single and double capstan configuration (we also supply detachable type configuration and specification of the same can be provided on request)

The most compact and easy to use machine in it's range, Amico HC-100
hydraulic hose crimping machine can be operated even by an unskilled operator.

Features:

> Easy to operate
> Easy to change dies
> High crimping force
> Accuracy of 0.05
> Compact design

>The attach pum is with double speed system which ables compression & shorten the compression time.
> The head is roatteable 180 degree freely to work in narrow space.
> The pump is fitted with safety valve which releases the pressure automatically to prevent overloading.
> Fibre glass insulated handles are provided to prevent accidental shock.

> Simple manual hydraulic operation with single Plunger dual action
> Completely manual hydraulic operation so external power is not needed.
> with or without rotating stand locks in three positions for stability and versatility.
> Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe.
> Different standard bending dies included (1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2 1/2", 3", 4 & 5).
> Useful for bending Aluminum Bus Bars up to 120mm diameter with thickness of up to 12 mm.

Sag Scope is used to observe the sagging operation and measure the sag level presisely
Zoom type Sag Scope
Monocular
Optical Magnification factor of 4.0
Can be mounted on steel angles with triangle ranging
from 56 degrees to 125 degrees