Verified
Add Review
Amplo Elevators is a company primarily focusing on product quality by producing almost complete raw material in-house, required for erecting and maintaining Lifts. Amplo Elevators is achieving by itself. Hence Quality, Facility and Infrastructure are not at all a problem.
Traction elevators are the most common type of elevators. Elevator cars are pulled up by means of rolling steel ropes over a deeply grooved pulley, commonly called a sheave in the industry. The weight of the car is balanced by a counter weight. Sometimes two elevators are built so that their cars always move synchronously in opposite directions, and are each other's counterweight. Nowadays, some traction elevators are using flat steel belts instead of conventional steel ropes. Flat steel belts are extremely light due to its carbon fiber core and a high-friction coating, and does not require any oil or lubricant. Because of these qualities, elevator energy consumption in high-rise buildings can be cut significantly. › Geared • Manual Door (CERES) • Auto Door (EOS) › Gearless With Machine Room (TERRA) • Manual Door • Auto Door Without Machine Room (IRIS) • Manual Door • Auto Door Home Lift (HEBE) • Manual Door • Auto Door
Hydraulic elevators are elevators which are powered by a piston that travels inside a cylinder. An electric motor pumps hydraulic oil into the cylinder to move the piston. The piston smoothly lifts the elevator cab. Electrical valves control the release of the oil for a gentle descent. Hydraulic elevators are used extensively in buildings up to five or six stories high. Sometimes, but rarely, up to 8 stories high. These elevators, which can operate at speeds up to 61 meters (200 ft) per minute, do not use the large overhead hoisting machinery the way geared and gearless traction systems do. All modern hydraulic pumps are either equipped with a Solid-State Contactor or a mechanical Y-Delta starter. Solid-State Contactor starters are better for the motor and the building's power supply, as the windings last longer and there are no voltage drops across the line of the building's power supply. Y-Delta starters use two contactors to start the motor on a reduced speed, then kick on full speed. Old hydraulic elevators just started up abruptly, sending mains power at full blast right into the motor. This puts a lot of strain on the motor which, in turn, makes it burn out faster than motors on Y-Delta or Solid-State Contactor starters. There are three types of hydraulic elevator; holed hydraulic, holeless hydraulic and roped hydraulic. 1. Suitable for more comfort & noiseless 2. No pit Required 3. Less consumption of electrical energy 4. Customizedsolution possible
Share your thoughts with other customers for Amplo Elevators
Add Review
