- Number Of FlowerCapping Machine
- MaterialMetal
- PurityPneumatic And Motorized Piston Filling, Geneva Mechanism For Turret Indexing, Vibratory Feeder For Cap Feeding, Separate Control Panel With Switches, No-container-no-fill-no-cap Facility, Cap Tightening At Separate Station
- Availability350 Kgs Approx
- ModelFCAE20
- Packaging TypeIndustry Standard Packaging
- Storage TypeRequires Dry And Clean Environment
- Machine Size2000mm L X 750mm W X 750mm B X 1800mm H
- MotorsMain Motor: 1 HP 1440rpm, 1 Phase, 50 Hz, Conveyor Motor: 14 HP PMDC Variable Speed 220VAC, 50 Hz, Fill Motor: 12 HP 1440rpm, 220VAC
- Electricity Required1 Phase, 220VAC, 50Hz, 1.5 KWh
- Output20 Containers Per Minute
- Fill Range25ml To 100ml
Automatic capping machine is a hugely demanded machine, which is demanded by clients increasingly. Offering a wide range of automatic capping machines, amson engineering has statured itself on the top among the listed manufacturers and exporters of automatic capping machines. Technical specificationsmachine overall size : 2000mm l x 750mm w x 750mm bx 1800mm hweight : 350kgs approxmodel : fcae20main motor : 1 hp 1440rpm, 1 phase, 50 hzconveyor motor : 14 hp pmdc variable speed 220vac, 50 hz6 feet long conveyorindexing of turret : geneva mechanismnumber of holders : 6nosfilling : pneumaticmotorized piston filling for paste and volumetric syringe for liquidfill motor : 12 hp 1440rpm, 220vac, and gearbox of sufficient powerclutch brake assisted filling for sudden start and stop.no-container-no fill-no-cap facilitycap feeding by bowl feedervibratory feedercap pressingcap tightening at separate station.electricity required 1 phase, 220vac, 50hz, 1.5 kwhoutput : 20 containers per minutefill range 25ml to 100mllabor required 1 semi-skilled operatorseparate control panel with control switches
Accomplished With
| Machine consists of input and output conveyors | Then the turret holds and indexes the filled bottles to a cap placing station |
|---|
| A flower wheel(Turret) arrangement to hold and index the bottles, a frame structure , a vibratory cap feeder, and drive mechanism | A vibratory cap feeder controls the orientation of the caps and feeds to a chute which leads to the capping station |
|---|
| A separate panel box which controls the complete machine is provided with the machine with control switches | When the bottle comes to the station, each bottle is placed by cap and ready to tighten |
|---|
| Bottle or containers are fed to the machine conveyor, manually or by a Turn table arrangement which is optional | During the next indexing, tightening of caps to the required strength occurs |
|---|
| Bottles are collected and moved to the filling station from the conveyor by a turret wheel | Tightening station can either screw capping or press capping according to the requirement of customer |
|---|
| Here at filling station, filling of required volume is done accurately | After tightening, the flower wheel indexes and the capped bottles carried to an outlet conveyor for final packing |
|---|