Other Products / Services #3831005

Standard ratios from 5:1 to 100:1. Peak torque ratings up to 210mm, backlash < 12 arc mins.

• Used in conjuction with a "KZH3" safety start module for two-hand control applications : folding, clipping, punching, rail-cutting, bending, drilling, presses, etc.
• Supplied with an emergency stop button and 2 spring-return mushroom head pushbuttons.
• Conforms to EN 574 concerning safety applications.

Direction Control Valves:5 sizes from NG 6 to NG 32. Flow up to 2000 lpm, 350 bar, Manifold mounting according to DIN, ISO, CETOP, NFPA. Electric, hydraulic and pneumatic actuation.

1. Low Watt Direction Control Valves:Electrical connection to DIN 43650 or M12X1 and DESINA Version.Especially suitable for Bus system due to a low-current input. Service friendly through leakage free coil change

• Electric Control Pilot Operated:4 sizes from NG10 to NG 32, Flow up to 2000 lpm, 350 bar, Manifold mounting according to DIN, ISO, CETOP, NFPA.

• Proportional Valves:5 sizes from NG 6 to NG 32. Flow up to 2000 lpm, 350 bar, Manifold mounting according to DIN, ISO, CETOP, NFPA. Interfaces with integrated electronics. High response for closed loop application.
  
  

• Digital Electronics for Valve amplifier:Digital and reproducible input signals, ramps parameters. Double PWM amplifiers. Resolution of signal and actual valve less than 0.05%. High safety and compliant with EMV specifications. RS 232 serial interface. For Electrohydraulic axis regulators.
  
  

• Pressure flow and check valves:4 sizes for NG 6 to NG32. Flow up to 350 lpm, 350 bar, manifold mounting, mechanically adjustable, Electrically dischargeable or proportionally adjustable through integrated or external electronics.
  
  

• Flow Control Metering and shut off valves:Manatrol color flow series: 9 Sizes from 1/8 inch to 2 inch BSP. Flow up to 600 lpm, 350 bar. Inline & manifold mounting.
  
  

• Sandwich Type Manapak Valves:4 sizes NG 6 to NG 25. Up to 350 bar. RM Pressure relief Valve. PRM pressure reduction valve, FM flow control valve. CM directly operated check Valve, CPOM Pilot operated check Valve.
  
  

• Pressure Switches:Flange & treaded connection. Switching pressure range 3 - 40, 10 -100, 10 -160, 20 -250 bar, Pressure capability 315 bar. Adjustments with hollow hexagonal screw or scaled knob. AC/DC power supply. Optional locking knob.
  
  

• Pressure Intensifiers:Mounting pattern NG 6. Check valves NG 6 and NG 10 with subplate mounting option. Maximum pressure up to 500 bar. Transmission ratio 1:2 and 1:4. Continuous flow increases with minor pulsation effect.
  
  

• Threaded Cartridge Valves:Directional pressure, flow and shut-off valves. Housing optional. 5 sizes up to 250 lpm, 210 bar. Solenoid or proportional actuation. Industrial or mobile applications.
  
  

• Slip-in Cartridge valves:DIN 24342. 8 sizes NG 16 to NG 100, Flow up to 10000 lpm, 350 bar, Modular construction system for pilot valves and cartridges. Also as safety valve with position control position control.

• Hydraulic Cylinders : ISO / DIN, 210 BarHMI - ISO 6020/2 standard, 210 bar, HMD - DIN 24 554 standard, 210 bar, Bore sizes 25-200 mm, Tie rod cylinders for heavy duty applications.
  
  

• Hydraulic Cylinders: 210 BarNFPA Standard, 210 bar, Bore sizes 38.1- 304.8 mm. Tie rod cylinders for heavy duty applications

• Hydraulic Cylinders: 70 Bar3L - NFPA standard, 70 bar, Bore sizes 25.4-203.2 mm3E - CNOMO standard, 80 bar, Bore sizes 32-125 mmTie rod cylinders for heavy-duty applications.
  
  

• Hydraulic Cylinders: ISO / 250 Bar / Round LineISO 6022 standard, 250 bar, DIN 24333 Standard, 250 bar, Bore sizes 50 - 320 mm. Round line cylinders for heavy-duty applications.
  
  

• Hydraulic Cylinders: ISO / 160 Bar / Round LineISO 6020/1 standard, 160 bar, sizes 50 - 320 mm. Round line cylinders for heavy duty applications.
  
  

• Hydraulic Cylinders with electrical feedback and Position indicator:Various types electronic position and velocity feedback devices are offered for use with proportional and servo valves. Electrical and mechanical position indicator signal when end stroke is reached.
  
  

• Safety rod locking devices:Fail safe locking device clamps piston rod if pressure is lost. For tie rod cylinders, bore sizes 32-160 mm.Load holding capacity 5 - 100 KN.
  
  

• Rotary Actuators (Rack & Pinion):HTR - 200 bar hydraulic, max. output torque 68000 Nm.LTR - 70 bar hydraulic, max output torque 2350 NmPTR - 18 bar pneumatic, max. Output torque 560 Nm

1. High Performance Axial Piston Pumps
   4 bolt mounting, 11 sizes, 16 to 270 cc/rev, 350 bar, Speed max. 2750 rpm. Single and multiple pumps, Wide range of control options, Low noise. For industrial and mobile applications.

2. Medium Duty Axial Piston Pumps
   2 bolt mounting, 6 sizes 16 to 140 cc/rev, 250 bar, Speed up to 3000 rpm, single and multiple pumps, Wide range of control options. Load sensing. For Industrial and mobile applications

3. Axial Piston Pumps
   2 and 4 bolt mounting with wide range of control options, 4 sizes 60 to 145 cc/rev., 137 bar. Speed up to 3000 rpm. Low noise modular design. Standard and supercharged versions available. Single and multiple pumps.

4. Gear Pump and Motor
   2 & 4 bolt mounting, Cast iron & Aluminum design. 0.8 to 200 cc/rev, 275 bar, speed up to 3500 rpm. Single & tandem pumps for industrial & mobile applications.

5. Medium Pressure Vane Pumps
   4 bolt mounting, 7 series 8 to 50 cc/rev. Nominal Pressure 140 bar. Max Speed up to 1800 rpm. Single & multiple pumps for industrial and mobile applications

Eurocard Systems ComponentsBased on the standard Eurocard board format, a range of Stepper motor, DC Servo and Control modules ideally suited for system integration for a wide range of motor control solutions.

Brushless servo motor systems based on proven drives and controls offering a wide range of solutions to your control problems. Single and multi axis systems from 30 to 5000 watts.

The SM9000 series, a range of freestanding modular DC Servo motor systems incorporating power supply, amplifiers and powerful digital motion controllers for open or closed loop control.

• A wide range of robust industrial incremental rotary encoders providing up to 5000 ppr with differential outputs & index marker as standard.
• Special line counts are easily accommodated. High resolution linear encoding systems providing 0.1 micron resolution.
• High resolution rotary encoding systems provide 7, 200, 000 cpr Leine & Linde single turn absolute encoders up to 13 bit resolution.
• 25 bit multi-turn absolute encoders with 13 bit single turn resolution.
• Parallel, series and alternative Bus interface options.

• Economy range up to 57 mm diameter, peak torque ratings up to 40 Nm.
• Planetary servo gearheads with choice of precision ratings.
• HPE series offering typically 12 arc minute backlash in frame sizes from 50-120 mm diameter and torque ratings up to 210 Nm.
• HP series offering typically 4 arc minute backlash in frame sizes from 60 to 180 mm diameter & torque ratings up to 1200 Nm.
• Standard exact gear ratios from 5 to 100:1
• Simple fitting system for virtually any motor.

1. SM9749 Stepper motor drive module - complete single axis stepper systemThe Bi-polar drive stage provides 400 step resolution and an output up to 3.5 Amps/phase with a 40V rail that automatically increases when high motor speeds are required. A range of matched motors from size 17 to NEMA size 34 are offered with the drive providing a choice of operating torque ratings up to 1.5 Nm.

Protected micro switches with high sensitivity rotary action - 29.6 x 16.4 x 18 mm

1 - Adjustable cams
2 - Precut cams
3 - Striker cams
4 - Mixed

Key-operated metal solenoid locking switches, IP 67

"Emergency stop" cable-operated safety switch, IP 65