Other Products / Services #2220628

• Baby Credle on Stand Code : ASI 124

• Frame made of MS tubular
• Legs with rubber stumps
• Delachable Baby cradle
• Epoxy powder coated

• Product size 210 x 53 cm
• M.S. Tubular or Aluminium

• Ms tubular frame mounted on four swivel castors 15cms dia
• the under carriages can be interlocked lengthwise and the stretcher rolled over from one carriage to another on rollers.
• stretcher can be raised at one end on ratcher SS IV rod with two locations
• Gas cylinder provision in one under carriage
• Epoxy Powder coated

• Main dome 28 + 7 Reflectors & Satelite dome 20 4 Reflectors.
• Each fitted with a special halogen bulb 24 V 70 watts.
• Complete with low voltage unit auto cut.
• Movements Axial Angular & Radial.

• 19 Dome Single Reflector
• Halogen bulb 24 x 150W
• Inbuilt Low Voltage unit
• One stand by bulb

• Made of MS tubular
• Can be litted to any hospital bed
• epoxy powder coated

• Made of MS tubular steel
• Epoxy powder coated

• Size : 1500/ 1300 mm
• Aluminum made

• Made of MS tubular
• Epoxy powder Coated

• Double flap
• Made of aluminum sheet

• input voltage : 87-270v/AC current fuse 6Arnps
• Output control All Digital and push switch control in all modes
• Safety Features : unit construction According IEC-6060I-2-260601-1
• Protection class-1 Unit type CF, Output All Floating output
• Current loakage : High frequency < 150 qamp .in all output Low Frequency

• Steel material chrome plated
• Foldable
• Plastic Seat with covwe.

• 6x 6
• 11x 7
• 10x 8
• 12x 10
• 15x 12
• 18x 12

• 6, 8, 10 & 12

• 9x 9
• 11x 9
• 11x 5
• 15x 12
• 11x 18

• 35 CMS & 40 CMS

• 12x 12or 12x 14
• Cooker Type with stand
• Made of Aluminium Alloy

• 480x480x760/800mm (LxWxH)
• Made of ABS plastic Light steadlness no aging
• Bult in towel shelf and one oddment rack

• Overall size 66 x 96
• 3 or 4 folds
• MS tubular construction.
• Legs with 50mm dia castors
• With spring wire for curtain cloth
• Epoxy powder coated .

• M.S. Tubular construction.
• Mounted on 10cms dia castors.
• Stainless steel basin

• Size 58Hx24Wx14 depth
• All M.S. Sheet construction.
• Four removable glass shelves.
• Door with glass & lockable handle
• Epoxy powder coated.

• M.S. tubular construction
• Mounted on 5 legs plastic / polymer base with 50mm dia castors
• Two stainless steel basins of approx 35cms dia Each
• Epoxy powder coated

Radian Warmer Code : ASI 191

• Skin/Air/Manual (LCD)
• 1Bright FND, Skin temp Display
• 1 Bright FND Air Temp Display
• LED Bar heater output % Display
• Set temp Display on FND/LCD by mode selection
• All modes Display on LCD
• Time Display on LCD

• All safety alarms visual display on LCD

• Skin temp Hegh (>0.5c of set Temp)
• Skin Temp Low ( 38C)
• Skin temp under range ( < 34 c )
• Skin Sensor fall alarm
• Air mode/safety Alarms & High temp cut off/power failure alarm

Input Voltage 220v/AC = 10% 50HzLight source 50 watts bulb to examine baby.

• Fitted with 2 Blue & 4 White fluorescent tubes (2teel)
• With baby cradle
• Mounted on castors.

• Oxygen concentration : 90%
• Oxygen flow 1 5L/min
• Output pressure : 30-70KPA
• Overrunning pressure alarm
• Noise

• It can destroy needle and syringe (2ml to 10ml capacity)
• Power supply 220V + 10% 50H2 AC

• M.S. Epoxy Powder coated or S.S Base on rubber stumps
• Horizontal heavy duty vacuum pump foot operated.
• 2x750ml glass graduated suction jars with rubber lids
• Complete with vacuum gauge suction tubing.