polyurethane direct glazing & structural bonding adhesive sealant

asmaco pu 72is an excellent, non-sag, one-component, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. It is non conductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment

key performance properties:

one-componentlow odorbonds and seals at the same timeshort tack free and curing timevery high thixotropy for good gap filling propertiesadhesion to a wide range of substratesnon-staining curing processnon-corrosiveinitial load bearing capacityincreases tortional stiffness of final assemblyshock/impact resistantvibration and sound damping propertiesdrive away time: 3 hours (throughout operating window of -5c to +40c)

asmacryl-52 is a single component gun grade sealant formulated by using acrylic emulsions and special. hence, the product is easy to apply and efficiently seals joints between construction parts subjected to moderate stress. It is a ready to use and seals internal and external joints in porous substrate such as concrete, plastics, asbestos, cement, brick work and wood. asmacryl 52 can be used for sealing all low movement joints

features:

• easy - to - use one component type.
• cures at room temperature at ambient humidity conditions.
• no surface pre-treatment or primer required in most of the surfaces.
• water based low voc sealant.

• ambient temperature curing

• fast curing

• convenient mix ratio of 1: 1 by weight / volume

• no shrinkage

• can be shaped through machining and best suited for metal repairs

• resistant to solvents and water

• good resistance to oils

• good adhesion on metals, wood, glass, ceramics and many of the plastics

• steel filled to give optimum performance

high quality acrylic emulsion based gun grade adhesive. Specially formulated commonly used cornices made of polyurethane, polystyrene, gypsum & others

features:

• single part
• easy to use
• fast curing
• aqueous based
• low voc
• microbial resistant
• paintable
• non-sag
• non cracking
• excellent adhesion to cornice materials
• good gap filling capability

One component moisture cure, triple expanding (300%) Foam. Mainly used for thermal insulation, filling of joints and cavities in wall & ceiling.

Also available in Fire Retardant Grade

FEATURES

• 300% - Triple Expanding Foam
• Quick drying, moisture curing
• Closed cell structure, resistant to water absorption
• Excellent thermal insulation characteristics
• Suitable for sealing high volume low moment gaps.
• CFC Free

polyurethane direct glazing & structural bonding adhesive sealant

asmaco pu 72is an excellent, non-sag, one-component, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. It is non conductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment

key performance properties:

one-componentlow odorbonds and seals at the same timeshort tack free and curing timevery high thixotropy for good gap filling propertiesadhesion to a wide range of substratesnon-staining curing processnon-corrosiveinitial load bearing capacityincreases tortional stiffness of final assemblyshock/impact resistantvibration and sound damping propertiesdrive away time: 3 hours (throughout operating window of -5c to +40c)

asmacryl-52 is a single component gun grade sealant formulated by using acrylic emulsions and special. hence, the product is easy to apply and efficiently seals joints between construction parts subjected to moderate stress. It is a ready to use and seals internal and external joints in porous substrate such as concrete, plastics, asbestos, cement, brick work and wood. asmacryl 52 can be used for sealing all low movement joints

features:

• easy - to - use one component type.
• cures at room temperature at ambient humidity conditions.
• no surface pre-treatment or primer required in most of the surfaces.
• water based low voc sealant.

• ambient temperature curing

• fast curing

• convenient mix ratio of 1: 1 by weight / volume

• no shrinkage

• can be shaped through machining and best suited for metal repairs

• resistant to solvents and water

• good resistance to oils

• good adhesion on metals, wood, glass, ceramics and many of the plastics

• steel filled to give optimum performance

high quality acrylic emulsion based gun grade adhesive. Specially formulated commonly used cornices made of polyurethane, polystyrene, gypsum & others

features:

• single part
• easy to use
• fast curing
• aqueous based
• low voc
• microbial resistant
• paintable
• non-sag
• non cracking
• excellent adhesion to cornice materials
• good gap filling capability

One component moisture cure, triple expanding (300%) Foam. Mainly used for thermal insulation, filling of joints and cavities in wall & ceiling.

Also available in Fire Retardant Grade

FEATURES

• 300% - Triple Expanding Foam
• Quick drying, moisture curing
• Closed cell structure, resistant to water absorption
• Excellent thermal insulation characteristics
• Suitable for sealing high volume low moment gaps.
• CFC Free