Air Separator is used to remove dissolved airgases or micro bubbles from closed or open hydronic, HVAC, boiler other water fluid systems. In the process it separates undissolved impurities as well. Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top. For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding. Sediment Separator removes impurities heavier than water - Prevents Choking of strainers - Prevents damage to pumps and other equipment

Simple and rugged construction • Suitable for ducts carrying air or any other non-corrosive gas • Indicates the presence or absence of air flow to start and stop electrically operated equipment in a flow or noflow condition • Can be used for monitoring flows in horizontal and vertical ducts with upward air flow

The 405S is a dry dial multijet water meter with a protected magnetic transmission between the measuring element and the totalizer. It is a PN 16 meter suited to hard network conditions Its reliability, resistance to bad water quality and noiseless operation will satisfy both end users and network managers

6..:#651#5'&&')#44+0)#0&8#5'3#-'62 ="13-41023'4463'&+(('3'05+#.&'#'3#5+1023+0%+2.' =6+.5+0(.18'5'351'#463'&')#44'�& #-'628#5'371.6'4 =+%31231%'4413$#4'&%10531.2#0'. =%12#5+$.' =..1210'054+'2627#%6656$'7#.7'4 +05'3%100'%5+0)2+2+0)#0&%10531.2#0'.1605'& 10#%12#%545''.(3#' BE

Polymer Composite body Easy operation Highly reliable Economical Easy maintenance BENEFITS TECHNICAL DATA Materials Valve body : Polymer Composite Spindle : S.S Spindle packing : O-ring (nitrile) Shutoff ball : EPDM Rated pressure : 25 bar Fluid temp limits : 5°C to 110°C Rated voltage supply : 230 V, 1 Phase, 50 Hz Absorbed power : 6 W Mounting position : Horizontal or vertical (Do not mount with motor downwards) Protection : IP 20 FCU VALVE Normally Closed Port - Coil Port Normally Open Port - Bypass Port Center Port -Common Port POLYMER • • • • Long life synchronous motor drive with spring return • • Available with two way and three way connections • • Suitable for two position control of hot and chilled water in fan coil units and other small zone units • AutoManual lever • Size 20 mm dia

Air Separator is used to remove dissolved airgases or micro bubbles from closed or open hydronic, HVAC, boiler other water fluid systems. In the process it separates undissolved impurities as well. Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top. For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding. Sediment Separator removes impurities heavier than water - Prevents Choking of strainers - Prevents damage to pumps and other equipment

Simple and rugged construction • Suitable for ducts carrying air or any other non-corrosive gas • Indicates the presence or absence of air flow to start and stop electrically operated equipment in a flow or noflow condition • Can be used for monitoring flows in horizontal and vertical ducts with upward air flow

The 405S is a dry dial multijet water meter with a protected magnetic transmission between the measuring element and the totalizer. It is a PN 16 meter suited to hard network conditions Its reliability, resistance to bad water quality and noiseless operation will satisfy both end users and network managers

6..:#651#5'&&')#44+0)#0&8#5'3#-'62 ="13-41023'4463'&+(('3'05+#.&'#'3#5+1023+0%+2.' =6+.5+0(.18'5'351'#463'&')#44'�& #-'628#5'371.6'4 =+%31231%'4413$#4'&%10531.2#0'. =%12#5+$.' =..1210'054+'2627#%6656$'7#.7'4 +05'3%100'%5+0)2+2+0)#0&%10531.2#0'.1605'& 10#%12#%545''.(3#' BE

Polymer Composite body Easy operation Highly reliable Economical Easy maintenance BENEFITS TECHNICAL DATA Materials Valve body : Polymer Composite Spindle : S.S Spindle packing : O-ring (nitrile) Shutoff ball : EPDM Rated pressure : 25 bar Fluid temp limits : 5°C to 110°C Rated voltage supply : 230 V, 1 Phase, 50 Hz Absorbed power : 6 W Mounting position : Horizontal or vertical (Do not mount with motor downwards) Protection : IP 20 FCU VALVE Normally Closed Port - Coil Port Normally Open Port - Bypass Port Center Port -Common Port POLYMER • • • • Long life synchronous motor drive with spring return • • Available with two way and three way connections • • Suitable for two position control of hot and chilled water in fan coil units and other small zone units • AutoManual lever • Size 20 mm dia