The Company has Oil fired, fixed-Garth, reverberatory Melting-cum-Holding Furnaces having capacities of  5 MT, 6 MT & 15 MT . Molten metal treatments is carried out by an Automatic Flux Feeder in conjunction with "eco-friendly" nitrogen degassing. The presence of hydrogen gas in the molten metal is detected using a Gas detector. Further degassing is carried out, if required, prior to casting. Composition is determined using Direct Reading Vacuum Emission Spectrometer.

The DC Casting unit is flexible to cast  4", 5", 7"  diameter billets in alloys ranging from 1xxx to 7xxx series.

With the  4 Extrusion press  lines -  2000 MT, two of 1000 MT & 650 MT (indigenous) - all PLC Controlled, the Company is able to cater to all the requirements ranging from miniature profiles up to large-sized Profiles in Soft, Medium and High Strength Alloys. The arrangement for taper heating of billets ensures' near-isothermal' extrusion for achieving uniform property along the length of the extruded profiles/ sections/bars.

Die Oven is the equipment which is applied with Extrusion press to mold the temperature near the billets and further suitably to extrusion molding. We use advance die oven having fully intelligent PLC and touch facility with heating time up to  15 minutes  only, Which Can heat up  3 die  at a time and index  8 to 10 dies .

Angel Extrusion Pvt. Ltd. has an installed profile of handling equipment's at high degree of automation, our handling equipment helps us to maximize throughput while minimizing manual handling. The belt system used for handling the aluminum extrusions keeps the soft metal; scratch-free and shiny.

The DC Casting unit is flexible to cast  4", 5", 7"  diameter billets in alloys ranging from 1xxx to 7xxx series.

Die Oven is the equipment which is applied with Extrusion press to mold the temperature near the billets and further suitably to extrusion molding. We use advance die oven having fully intelligent PLC and touch facility with heating time up to  15 minutes  only, Which Can heat up  3 die  at a time and index  8 to 10 dies .

The Company has Oil fired, fixed-Garth, reverberatory Melting-cum-Holding Furnaces having capacities of  5 MT, 6 MT & 15 MT . Molten metal treatments is carried out by an Automatic Flux Feeder in conjunction with "eco-friendly" nitrogen degassing. The presence of hydrogen gas in the molten metal is detected using a Gas detector. Further degassing is carried out, if required, prior to casting. Composition is determined using Direct Reading Vacuum Emission Spectrometer.

With the  4 Extrusion press  lines -  2000 MT, two of 1000 MT & 650 MT (indigenous) - all PLC Controlled, the Company is able to cater to all the requirements ranging from miniature profiles up to large-sized Profiles in Soft, Medium and High Strength Alloys. The arrangement for taper heating of billets ensures' near-isothermal' extrusion for achieving uniform property along the length of the extruded profiles/ sections/bars.

Angel Extrusion Pvt. Ltd. has an installed profile of handling equipment's at high degree of automation, our handling equipment helps us to maximize throughput while minimizing manual handling. The belt system used for handling the aluminum extrusions keeps the soft metal; scratch-free and shiny.