Features :

• 7 -Tank Galvanizing process for better adhesion and uniformity of zinc coating
• Single dip galvanizing process for better finishing
• External/ Internal Hinge Provide for better anti-vandalism system
• Material -  Shaft- High tensile sheet/Plate Equivalent to BSEN 10025 - 2004/IS 2062 - 2011 Gr. E350BR/IS 5986 - 2011 Gr 355 Base Plate- As per IS 2062 - 2011 Gr. E250A,
• Design -  As Per IS 875 Part-3 - 2015, IS 800, IS 6533 - 1989, BS 5649 - 1985/EN 40, ILE TR-7 - 2000

Features :

•  In house Design facilities (Structural & Foundation) with PLS/Special Software (Validate from IIT-Kharagpur.
•  Available both in three point and two point suspension.
•  Electroplated rope drum, sprocket and torque limiter which do not rust.
•  Rope drum of winch have one left hand and other right hand groove for better alignment of ring.
•  Available both Detachable arm and fixed arm Lantern Ring.
•  Seven tanks and zero discharge galvanizing process with Flux tank heated by superheated steam for better Adhesion of zinc coating.
•  All testing facility available in plant including Spectrometer for chemical analysis.
•  All Trailing cables confirm to IS 9968 (P-1) for safety and durability.
•  All the hardware supplied are stainless steel for better life.
•  Our head frame have stainless steel axle with anti rotation clamp to prevent damage of axle and stainless steel guide roller for smooth rolling of cable and rope.
•  Heavy duty drive chain (1/2 inch pitch) for lifting the ring.
•  We provide safety locking rope for high mast safety.
•  We provide double safety protection of motor (one mechanical and one electrical)
•  Optionally we provide anti thief nut for foundation bolt with specially developed wrench for High mast.
•  Can provide both PVC and HDPE buffer arrangement for Lantern Ring.
•  All winch & Motor tested with proper load before dispatch.
•  Structural Design is checked for all orders before production.
•  Wind Tunnel test from IIT-Kanpur.

Other Details :

•  Material -  Shaft– High tensile sheet/Plate Equivalent to BSEN 10025  -  2004 / IS 2062  -  2011 Gr.E350BR / IS 5986  -  2011 Gr 355, Base Plate- As per IS 2062  -  2011 Gr.E250A,
•  Foundation Bolt- IS 1367  -  1994 / IS 2062  -  2011 Gr.E250A
•  Galvanizing -  As Per IS 4759  -  1996 / IS 2629  -  1985 / BSEN ISO 1461  -  2009
•  Wind Speed -  As per IS 875 (Part-3) - 2015/As per customer requirement
•  Design -  As Per IS 875 Part-3 - 2015, IS 800  -  2007 / IS 6533 - 1989 (P-2) / BS 5649  -  1985 / EN 40, ILE TR-7 - 2000.
•  Welding -  As per IS 10178  -  1995/ IS 9595  -  1996

Design Safety Factor :

•  As per ILE TR 7 - 2000.
•  Motor -  As per IS 325 - 1996 (3PH A.C., 415V, 4/6 Pole, 1HP to 3HP)
•  Winch -  350KGS, 500 KGS, 750 KGS (SGDD/DGDD) & 1500 KGS (DGDD).
•  Wire Rope -  Stainless Steel 6MM, 8MM, AISI 316, 7/19 Construction.
•  Trilling Cable -  As per IS 9968/P-1 - 1988 [2.5sq 5/8core, 4sq 5/8core, EPR Insulated, Sheathed.
•  Wiring Cable -  As per IS 694 - 1990
•  Pulley -  LM 6 with Self- lubricating PB bush.
•  Hardware -  Stainless Steel
•  Feeder Pillar Box -  As per customer requirement
•  Tolerances -  As per BS 5649  -  1978/EN 40, IS 1852 -  1985

Features :

• Hole has been done by CNC PLASMA for better accuracy.
• 7 Tank Galvanizing process for better adhesion and uniformity of zinc coating
• Single dip galvanizing process for better finishing
• Segments are welded by Submerged Arc Welding process for uniform and proper welding strength.

Owing to our huge logistics network, timely delivery of the placed orders is always executed!Ranked amidst the celebrated Suppliers of Street Light Pole, we are customers' reliable choice in the industry.

Features :

• 7 -Tank Galvanizing process for better adhesion and uniformity of zinc coating
• Single dip galvanizing process for better finishing
• External/ Internal Hinge Provide for better anti-vandalism system
• Material -  Shaft- High tensile sheet/Plate Equivalent to BSEN 10025 - 2004/IS 2062 - 2011 Gr. E350BR/IS 5986 - 2011 Gr 355 Base Plate- As per IS 2062 - 2011 Gr. E250A,
• Design -  As Per IS 875 Part-3 - 2015, IS 800, IS 6533 - 1989, BS 5649 - 1985/EN 40, ILE TR-7 - 2000

Features :

•  In house Design facilities (Structural & Foundation) with PLS/Special Software (Validate from IIT-Kharagpur.
•  Available both in three point and two point suspension.
•  Electroplated rope drum, sprocket and torque limiter which do not rust.
•  Rope drum of winch have one left hand and other right hand groove for better alignment of ring.
•  Available both Detachable arm and fixed arm Lantern Ring.
•  Seven tanks and zero discharge galvanizing process with Flux tank heated by superheated steam for better Adhesion of zinc coating.
•  All testing facility available in plant including Spectrometer for chemical analysis.
•  All Trailing cables confirm to IS 9968 (P-1) for safety and durability.
•  All the hardware supplied are stainless steel for better life.
•  Our head frame have stainless steel axle with anti rotation clamp to prevent damage of axle and stainless steel guide roller for smooth rolling of cable and rope.
•  Heavy duty drive chain (1/2 inch pitch) for lifting the ring.
•  We provide safety locking rope for high mast safety.
•  We provide double safety protection of motor (one mechanical and one electrical)
•  Optionally we provide anti thief nut for foundation bolt with specially developed wrench for High mast.
•  Can provide both PVC and HDPE buffer arrangement for Lantern Ring.
•  All winch & Motor tested with proper load before dispatch.
•  Structural Design is checked for all orders before production.
•  Wind Tunnel test from IIT-Kanpur.

Other Details :

•  Material -  Shaft– High tensile sheet/Plate Equivalent to BSEN 10025  -  2004 / IS 2062  -  2011 Gr.E350BR / IS 5986  -  2011 Gr 355, Base Plate- As per IS 2062  -  2011 Gr.E250A,
•  Foundation Bolt- IS 1367  -  1994 / IS 2062  -  2011 Gr.E250A
•  Galvanizing -  As Per IS 4759  -  1996 / IS 2629  -  1985 / BSEN ISO 1461  -  2009
•  Wind Speed -  As per IS 875 (Part-3) - 2015/As per customer requirement
•  Design -  As Per IS 875 Part-3 - 2015, IS 800  -  2007 / IS 6533 - 1989 (P-2) / BS 5649  -  1985 / EN 40, ILE TR-7 - 2000.
•  Welding -  As per IS 10178  -  1995/ IS 9595  -  1996

Design Safety Factor :

•  As per ILE TR 7 - 2000.
•  Motor -  As per IS 325 - 1996 (3PH A.C., 415V, 4/6 Pole, 1HP to 3HP)
•  Winch -  350KGS, 500 KGS, 750 KGS (SGDD/DGDD) & 1500 KGS (DGDD).
•  Wire Rope -  Stainless Steel 6MM, 8MM, AISI 316, 7/19 Construction.
•  Trilling Cable -  As per IS 9968/P-1 - 1988 [2.5sq 5/8core, 4sq 5/8core, EPR Insulated, Sheathed.
•  Wiring Cable -  As per IS 694 - 1990
•  Pulley -  LM 6 with Self- lubricating PB bush.
•  Hardware -  Stainless Steel
•  Feeder Pillar Box -  As per customer requirement
•  Tolerances -  As per BS 5649  -  1978/EN 40, IS 1852 -  1985

Features :

• Hole has been done by CNC PLASMA for better accuracy.
• 7 Tank Galvanizing process for better adhesion and uniformity of zinc coating
• Single dip galvanizing process for better finishing
• Segments are welded by Submerged Arc Welding process for uniform and proper welding strength.

Owing to our huge logistics network, timely delivery of the placed orders is always executed!Ranked amidst the celebrated Suppliers of Street Light Pole, we are customers' reliable choice in the industry.