Apex Industries

Industrial Area, Jalandhar, Punjab

• Positive clamping of flat jobs irrespective of the size.
• Low height & side clamping, leaving the entire top surface free of machining.
• Spring is provided for quick release of clamping force & jaw.
• Spherical washer is used in plate clamp to avoid it from swivelling.
• Useful for clamping the job whose height is one to two mm more than the thickness of plate clamp.
• Due to low height it is suitable for clamping work piece with small contact area e.g. plates, flats.

• Used on milling, shaping planing machine etc.

• Made of Hardened steel.

• Useful to hold the thin plates up to 9 mm thickness & clamp positively due to its very low height.
• The entire body goes in the T Slot & only clamping jaw remains above the bed level
• Enables complete surface to be machined in one setting.
• Main body is made of brass to save the machine bed from rusting & clamping jaw is made of heat treated alloy steel for strength & durability.
• Suitable for jobs which require low to medium clamping force.

• Used on milling, planing & where high clamping force is required.

• Body made of brass, clamping jaw made of hardened steel.

• Stepless clamp Easy to use for fast coverage of several ranges of work height without additional supports. Low space requirement on machine table.
• Swiveling half piece assures perfect clamping.
• Supplied with T Bolts. Hex Nut & plain washers along with this clamp.
• Heavy duty design and specially suitable for clamping of press and punching tools.

• Used where limited machine table space is available & milling, shaping, planing machine.

• Main body of S.G. Iron T Bolts & Hex Nut made of Toughened C 45.

• Rapid clamping & unclamping of work piece by quick action of the eccentric lever.
• Downward & forward action of the jaw ensures the positive clamping of the workpiece.
• Possible to do machining operation in one setting over the whole area of the work piece without moving the clamp

• Used in the construction of fixtures as standard, fast clamping & unclamping element to simplify the clamping system.
• Used on drilling, milling , cutting machines.

• Made of hardened steel.

• Occupies very little space due to its compact construction.
• Rapid clamping & unclamping by hand with positive down thrust by means of threaded spindle & eccentric lever.
• Clamping height can be steplessly adjusted & increased simply by using height adjustment cylinders.
• Spring is provided for quick release of clamping pad.
• Eccentric lever gives clamping stroke of 1.5 mm to clamping pad which results downward thrust of 10000 N.
• Easy and quick clamping of work piece by swinging away the clamping pad.
• Useful for mass production where clamping / declamping is to be done within a fraction of second.
• Code 906 E: Height adjustable cylinder for increasing the clamping height is available.

• Due to fast clamping & unclamping with positive down ward force it is widely used on machine tool pallets, NC machines etc. with or without T-nut. Used as standard clamping element in the construction of fixtures.
• Any T slotted table or with hole having M 12 threading on any machine

• Made of hardened steel.

• With the aid of support lugs / self aligning pads even small height jobs can be clamped.
• Full 360 range rotation facilitates workpiece loading.

• Used for jigs and Fixtures.
• Used for clamping of jobs from top where side clamping is likely to deform the component.
• Can mount in the fixture plates with holes as per requirement e.g. M10 / M12/ M16 etc.

• Heat Treated steel

(In accordance with the DIN 6315B Standard)

• Widely used for repetitive clamping applications frequent insertion and removal of part being clamped.Holding of press-tool and huge castings/dies while machining.
• As illustrated.

• Hardened and tempered steel R=80/90 kg/mm2 .

• Widely used on most of machines for clamping work pieces of various sizes
• As illustrated

• Hardened and tempered steel R=80/90 kg/mm2

• Hardened and tempered steel R=80/90 kg/mm2 Longer versions are used for large clamping distances due to large T-slot distance or enlarged work depth, i.e. on engraving Machines.

• Suitable to use as an off set clamp on most of the machines
• As illustrated
• Holding of press-tool and huge castings/dies while machining.

• Hardened and tempered steel R=80/90 kg/mm2 .

• Open end mould clamp straps having threaded adjustable support at the rear which can be adjusted to required height.
• Most useful where mould/die is clamped in vertical position.
• Convenient to the operator as other loose supports tend to fall down while setting.
• Large diameter forged base gives rigid clamping support and ensures machine bed safety.

• Material: Carbon Steel, hardened & tempered to 24-32 HRC hardness, chemically blackened.
• Application: Suitable as clamping element in work

• Material : Carbon Steel, hardened & tempered to 24-32 HRC hardness, chemically blackened.
• Application : Working holding on machine beds.

• Useful for job clamping on "T" slot table of Drilling, Milling, Shaping, Boring and Power Press etc.
• No support is required at the rear of the clamp. Since the body of the clamp is self-positioning.
• The body positions itself with the help of swivel hinge according to the thickness of the workpiece.

• Specially designed for low height applications, such as clamping of moulds on plastic injection moulding machines & pressure die casting machines.
• The compact front portion of the clamp enables it to penetrate in the limited area of the mould and clamp it.
• No supports are required at the rear of the clamp as the rear portion rests on the platen and front holds the mould.
• Flanged nut is tightened on the swivel washer which takes care of the positioning of the clamp body.
• The positioning of forged swivel washer on required curved groove enables the operator to set the centre distance between the clamping portion and the clamping bolt as per the nearest tapped hole available on platen (where there are no T-Slots).

• Manufactured from ductile SG Iron casting.
• Fine thread screw.
• Suitable for wood working and metal working applications.