• Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding measuring, machining and testing applications.
• These can be used either ways, up or standing on end. All Vee's and faces can be energized or de energized simultaneously by turning the rotary action control knob. This feature enables the Vee Block to hold both itself and the work on any flat ferrous surface including a permanent magnetic chuck (without energizing the chuck)
• For Applications require two Vee Block matched & numbered pairs are available.

• Extra height could be achieved by stacking the blocks.
• Supporting height is achieved instantaneously with quick adjustment of plates.
• It is compact, safe & reliable supporting system.
• May be used with or without exact height setter.

• Used on machines as supporting height block or spacers.

• Carbon Steel

• Useful for clamping the job from top or bottom.
• The ball swivels and provides contact with no damage to uneven surface.

• Used as stops, supports & thrust elements in jigs & fixtures. They can also be fitted to existing clamping elements.

• Body Steel Heat Treated - Ball Hardened.

• Useful for clamping the job from top or bottom.
• The ball swivels and provides contact with no damage to uneven surface.

• Used as stops, supports & thrust elements in jigs & fixtures. They can also be fitted to existing clamping elements.

• Body Steel Heat Treated - Ball Hardened.

• Locating pin size of pads : 12 mm dia.
• Designed for wide range of application.
• Material : Medium carbon steel, heat treated to 25-30 HRC hardness blackened.

• Machined on outside faces and with cored slots arranged for maximum clamping versatility.
• APRX Giant Angle Plates are best suited for work mounting and set up on such larger Machine Tools as Planning Machines Radial Drilling machines and so on.

• Manufactured and numbered in matched pairs, each pair has two 90 degree Vees of different capacities which are identical to the Vees of its matching block. The Vees are ground central, parallel and square with the ends and sides.
• Each pair of vee Blocks comes compete with a pair of rigid and robust clamps.

• Useful for holding work securely during drilling, milling and grinding operations and also in layout and inspection work.

• Made from finely selected tool steel fully hardened to 50-55 HRC.

• Permissible height difference between matched pairs within 5 microns
• Parallelism and squareness of Vee Grooves with respect to all surfaces within 8 microns
• Parallelism of opposite faces of Vee Blocks within 8 microns
• Squareness of adjacent exterior faces of vee Blocks within 8 microns
• Flatness of working faces within 5 microns

• Capable of being used on base, on end flat on either sides as the clamp is within the outside width of the block.
• Adjustable side screw with cap in the clamp supports the block and prevents tilting during drilling, milling or grinding operations.
• Four 3/8"-16 tapped holes, two in the base and one on each side allow attachment to an angle iron which can then be attached to a lathe face plate or held by a magnetic chuck
• Grooves at the stepped end, right angled to the base, provides handy means for holding shouldered stud, round Pins etc.

• Manufactured from Selected Steel, Vee Blocks are fully hardened and ground.

• Manufactured and supplied in matched and numbered pairs.
• Each Block incorporates 4 different sized Vee's thereby supporting a wide range of sizes. This enables a single block to be used as a workholding device for supporting different sized jobs.
• The larger sizes incorporate a cavity on either sides for convenience in handling during usage.

• These are very useful for making and checking of cylinderical parts.

• Made from close grained cast iron.
• These vee block are precisely ground and machined square and parllel.

• Squareness and Parallelism of vee grooves with respect to base (30 Microns)

• Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding measuring, machining and testing applications.
• These can be used either ways, up or standing on end. All Vee's and faces can be energized or de energized simultaneously by turning the rotary action control knob. This feature enables the Vee Block to hold both itself and the work on any flat ferrous surface including a permanent magnetic chuck (without energizing the chuck)
• For Applications require two Vee Block matched & numbered pairs are available.

Empire Angle Machine Vice with Graduated Swivel Base(2.1/2", 3")

• Optional unit to enable the user to convert quickly Rotary Milling to using Indexing Plates.
• The dividing plate set consist of 2 indexing plates, a sector & a handle with plunger.
• The dividing plate set consist of 2 indexing plates, a sector & a handle with plunger.
• Using this dividing plate set the indexing of 2 to 60 divisions can be attained quickly and accurately.

• APEX ROTARY TABLES have a sturdy design to suit many achining operations on Milling Machines including circular cutting, setting angles and indexing. They are available in a range of sizes to suit various machines and machining applications.

• The table and base is manufactured from close grain shock resisting Cast Iron dully stress relieved
• Worm & center table bush made of selected steel.

• Direct reading to 2 minute for size 6", 8" and 10" on handwheel scale.
• Direct reading to 1 minute for size 12", 15", 18" and 20" onhand wheel scale.
• ACCURACY:- Maximum error 4 minutes of circulardivision using hand wheels.
• Table flat to within 0.01 mm / 100 mm.
• Working surface rotates in its own plane to within 0.030mm.
• Horizontal and Vertical supporting surface square with0.01mm/100 mm.
• Centre bush bore is true to table axis within 0.03 mm.
• Maximum parallelism error through 360 rotation of tableis .025 mm .
• Both horizontal slots in & Vertical mounting on machine table.

• Drop forged steel body with ribs for added strength and rigidity.
• Fine thread screw
• These are suitable for all industrial applications and construction jobs.

• Used as an accessory for magnetic chuck to clamp thin & odd shape jobs.
• Simplest method of extending the magnetic flux of magnetic chuck with parellel poles to support the job.
• Maximum flux transformation when placed parellel to pole lines.
• 90 V provided for round job.
• Perfectly ground within 5 microns & suppliedin matched pair.

• Entire range of horizontal, vertical indexng milling operations can be done with our range of products.
• Job clamping is fast, indexing is quick thereby increasing production efficiency.
• Indexing fixture models covers the advantage of conventional Dividing Head and Rotary Table put together.
• Movable Parts are Hardened & ground for long life.
• Indexing accuracy is Precise and products can be used on SURFACE GRINDER also.
• Tail Stock With lead screw movement is provided for center support of Long shaft / Jobs.
• Tail Stock Center is sliding in hardened and accurately ground bushes.
• In most model, 24 indexing positions are provided.
• There is also a graduated collar with 1 deg least count which facilitates odd degree indexing also.

Indexing Milling Fixture - Horizontal & Vertical(With Chuck & Tail Stock)

• Split second clamping & unclamping of job.
• Most versatile application.
• Ideal & efficiency booster for mass production.

• SG Ductile Iron Body (Unbreakable).
• Collect holder made of selected steel hardened & ground.

Tilting Indexing Device ( with 3 Jaws Chuck Mounting )

• For bigger quantity work, rapid indexing is simplified by use of replaceable notched rings can be notched to individual requirements.
• Rapid direct indexing through 360 degree by means of scales graduated in units of one degree division on the flanges.
• Indirect indexing is by means of worm and worm wheel giving direct reading of one minute on handwheel scales.
• The chuck can be swivelled up to 90
• Worm Gear is easily and quickly detachable for direct indexing.
• Three Jaws chuck is standard equipment with one set of reverse jaws.
• The Graduation ring on hand knob is adjustable

• An ideal indexing device for mechanics, tool makers and engravers for speedy and precision milling, drilling, boring and grinding operations.

• Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding measuring, machining and testing applications.
• These can be used either ways, up or standing on end. All Vee's and faces can be energized or de energized simultaneously by turning the rotary action control knob. This feature enables the Vee Block to hold both itself and the work on any flat ferrous surface including a permanent magnetic chuck (without energizing the chuck)
• For Applications require two Vee Block matched & numbered pairs are available.

• Extra height could be achieved by stacking the blocks.
• Supporting height is achieved instantaneously with quick adjustment of plates.
• It is compact, safe & reliable supporting system.
• May be used with or without exact height setter.

• Used on machines as supporting height block or spacers.

• Carbon Steel

• Useful for clamping the job from top or bottom.
• The ball swivels and provides contact with no damage to uneven surface.

• Used as stops, supports & thrust elements in jigs & fixtures. They can also be fitted to existing clamping elements.

• Body Steel Heat Treated - Ball Hardened.

• Useful for clamping the job from top or bottom.
• The ball swivels and provides contact with no damage to uneven surface.

• Used as stops, supports & thrust elements in jigs & fixtures. They can also be fitted to existing clamping elements.

• Body Steel Heat Treated - Ball Hardened.

• Locating pin size of pads : 12 mm dia.
• Designed for wide range of application.
• Material : Medium carbon steel, heat treated to 25-30 HRC hardness blackened.

• Machined on outside faces and with cored slots arranged for maximum clamping versatility.
• APRX Giant Angle Plates are best suited for work mounting and set up on such larger Machine Tools as Planning Machines Radial Drilling machines and so on.

• Manufactured and numbered in matched pairs, each pair has two 90 degree Vees of different capacities which are identical to the Vees of its matching block. The Vees are ground central, parallel and square with the ends and sides.
• Each pair of vee Blocks comes compete with a pair of rigid and robust clamps.

• Useful for holding work securely during drilling, milling and grinding operations and also in layout and inspection work.

• Made from finely selected tool steel fully hardened to 50-55 HRC.

• Permissible height difference between matched pairs within 5 microns
• Parallelism and squareness of Vee Grooves with respect to all surfaces within 8 microns
• Parallelism of opposite faces of Vee Blocks within 8 microns
• Squareness of adjacent exterior faces of vee Blocks within 8 microns
• Flatness of working faces within 5 microns

• Capable of being used on base, on end flat on either sides as the clamp is within the outside width of the block.
• Adjustable side screw with cap in the clamp supports the block and prevents tilting during drilling, milling or grinding operations.
• Four 3/8"-16 tapped holes, two in the base and one on each side allow attachment to an angle iron which can then be attached to a lathe face plate or held by a magnetic chuck
• Grooves at the stepped end, right angled to the base, provides handy means for holding shouldered stud, round Pins etc.

• Manufactured from Selected Steel, Vee Blocks are fully hardened and ground.

• Manufactured and supplied in matched and numbered pairs.
• Each Block incorporates 4 different sized Vee's thereby supporting a wide range of sizes. This enables a single block to be used as a workholding device for supporting different sized jobs.
• The larger sizes incorporate a cavity on either sides for convenience in handling during usage.

• These are very useful for making and checking of cylinderical parts.

• Made from close grained cast iron.
• These vee block are precisely ground and machined square and parllel.

• Squareness and Parallelism of vee grooves with respect to base (30 Microns)

• Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding measuring, machining and testing applications.
• These can be used either ways, up or standing on end. All Vee's and faces can be energized or de energized simultaneously by turning the rotary action control knob. This feature enables the Vee Block to hold both itself and the work on any flat ferrous surface including a permanent magnetic chuck (without energizing the chuck)
• For Applications require two Vee Block matched & numbered pairs are available.

Empire Angle Machine Vice with Graduated Swivel Base(2.1/2", 3")

• Optional unit to enable the user to convert quickly Rotary Milling to using Indexing Plates.
• The dividing plate set consist of 2 indexing plates, a sector & a handle with plunger.
• The dividing plate set consist of 2 indexing plates, a sector & a handle with plunger.
• Using this dividing plate set the indexing of 2 to 60 divisions can be attained quickly and accurately.

• APEX ROTARY TABLES have a sturdy design to suit many achining operations on Milling Machines including circular cutting, setting angles and indexing. They are available in a range of sizes to suit various machines and machining applications.

• The table and base is manufactured from close grain shock resisting Cast Iron dully stress relieved
• Worm & center table bush made of selected steel.

• Direct reading to 2 minute for size 6", 8" and 10" on handwheel scale.
• Direct reading to 1 minute for size 12", 15", 18" and 20" onhand wheel scale.
• ACCURACY:- Maximum error 4 minutes of circulardivision using hand wheels.
• Table flat to within 0.01 mm / 100 mm.
• Working surface rotates in its own plane to within 0.030mm.
• Horizontal and Vertical supporting surface square with0.01mm/100 mm.
• Centre bush bore is true to table axis within 0.03 mm.
• Maximum parallelism error through 360 rotation of tableis .025 mm .
• Both horizontal slots in & Vertical mounting on machine table.

• Drop forged steel body with ribs for added strength and rigidity.
• Fine thread screw
• These are suitable for all industrial applications and construction jobs.

• Used as an accessory for magnetic chuck to clamp thin & odd shape jobs.
• Simplest method of extending the magnetic flux of magnetic chuck with parellel poles to support the job.
• Maximum flux transformation when placed parellel to pole lines.
• 90 V provided for round job.
• Perfectly ground within 5 microns & suppliedin matched pair.

• Entire range of horizontal, vertical indexng milling operations can be done with our range of products.
• Job clamping is fast, indexing is quick thereby increasing production efficiency.
• Indexing fixture models covers the advantage of conventional Dividing Head and Rotary Table put together.
• Movable Parts are Hardened & ground for long life.
• Indexing accuracy is Precise and products can be used on SURFACE GRINDER also.
• Tail Stock With lead screw movement is provided for center support of Long shaft / Jobs.
• Tail Stock Center is sliding in hardened and accurately ground bushes.
• In most model, 24 indexing positions are provided.
• There is also a graduated collar with 1 deg least count which facilitates odd degree indexing also.

Indexing Milling Fixture - Horizontal & Vertical(With Chuck & Tail Stock)

• Split second clamping & unclamping of job.
• Most versatile application.
• Ideal & efficiency booster for mass production.

• SG Ductile Iron Body (Unbreakable).
• Collect holder made of selected steel hardened & ground.

Tilting Indexing Device ( with 3 Jaws Chuck Mounting )

• For bigger quantity work, rapid indexing is simplified by use of replaceable notched rings can be notched to individual requirements.
• Rapid direct indexing through 360 degree by means of scales graduated in units of one degree division on the flanges.
• Indirect indexing is by means of worm and worm wheel giving direct reading of one minute on handwheel scales.
• The chuck can be swivelled up to 90
• Worm Gear is easily and quickly detachable for direct indexing.
• Three Jaws chuck is standard equipment with one set of reverse jaws.
• The Graduation ring on hand knob is adjustable

• An ideal indexing device for mechanics, tool makers and engravers for speedy and precision milling, drilling, boring and grinding operations.