APNAGHAR BIZCORP PRIVATE ...

Plaster Masters Ecoplast is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives.  It is supplied as dry powder in pre-weighed bags ready to use on site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.

Plaster Masters Ecoplast is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surface.

ADVANTAGES

• Consistent quality
• Easy to carry, use and apply
• Fixed mortar ratio
• Minimum rebound losses
• Almost no curing
• Reduced shrinkage cracks
• Time-saving
• Durable, smooth & excellent finish

METHOD OF APPLICATION

SURFACE PREPARATION

The surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Plaster Masters Ecoplast application, soak the entire surface with clean water.

MIXING

Mix Plaster Masters Ecoplast with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.

APPLICATION

Plaster Masters Ecoplast can be applied by normal masons just like the conventional method.

CURING

In general, no curing is required for Plaster Masters Ecoplast.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from the applied surface.

PACKAGING & STORAGE

40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.

SAFETY

Use of dust mask, safety goggles and gloves are recommended.

SILICO READY MIX PLASTER is a polymer-modified premixed cement-based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. READY-MIX PLASTER is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduce re-bonding losses, thereby increasing the productivity of the labor and has a water-retaining component which reduces the curing requirement of the plaster, when compared to the conventional method.

ADVANTAGES

Consistent quality

• Easy to carry, use and apply
• Fixed mortar ratio
• Minimum rebound losses
• Almost no curing
• Reduced shrinkage cracks
• Time-saving
• Durable, smooth & excellent finish

Ready Mix Plaster

Ready Mix Plaster is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives. It is supplied as dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.

Ready Mix Plaster is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surfaces.

METHOD OF APPLICATION

SURFACE PREPARATION

Surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Ready Mix Plaster application, soak the entire surface with clean water.

MIXING

Ready Mix Plasters with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.

APPLICATION

Ready Mix Plaster can be applied by normal masons just like the conventional method.

CURING

In general, no curing is required for Ready Mix Plaster.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from applied surface.

PACKAGING & STORAGE

40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.

SAFETY

Use of dust mask, safety goggles and gloves are recommended.