Delhi, India
GST : 07BPWPK0704H1ZS
Verified
Add Review
Our Products
We are counted amongst the noted Manufacturer, Exporter & Supplier of durable and efficient Fine Bubble Diffuser. Made using high-grade material like EPDM/ Silicon, our Fine Bubble Diffuser is acknowledged for its optimum strength and long term functionality. Our bubble diffuser features 63 mm diameter and 610 mm length. The size of bubble is 1.0 to 2.0 mm and the air flow rate of the diffuser is 2.0 – 7.0 cum/hr.
Specifications
| FINE BUBBLE DIFFUSER | MODEL ATI- 63-610t |
|---|---|
| Model | ATI- 63-610 |
| Material | EPDM / Silicon |
| Diameter | 63 mm |
| Length | 610 mm |
| Type of Bubble | Fine |
| Size of Bubbles | 1.0 to 2.0 mm |
| Air Flow Rate | 2.0 – 7.0 cum/hr |
| Effective Area Of Membrane | 0.1 sqm. |
| Operating Temperature Range | 35o Celsius |
| Temperature Tolerance Maximum |
85oCelsius |
| Size Of End Connection | ¾” NPT |
| Moc Of Membrane Support | Pvc |
| Moc Of membrane Clamps | SS - 304 |
| Moc Of End Cap | PVC |
| MOC OF END CONNECTOR | PVC |
| Size of End Connection | SS AISI 304 |
| SOTR | Upto 3 kg/kw/hr |
| NO. OF SLITS | 8435 |
Coarse Bubble Disc Diffuser that we Manufacturer, Exporter & Supplier is known for maximum oxygen transfer, low maintenance requirements, wide air flow range, and high resistance to clogging and corrosion. Our Coarse Bubble Disc Diffuser features a fine bubble membrane that is especially designed to suit the waste water chemical environment. The standard ¾” diffuser pipe thread makes it convenient to replace the other coarse/old bubble diffusers. The precision perforated “I” shaped slit holes open when airflow comes and close when airflow pressure drops, thus resist tearing and stay clean for longer.
Features & Benefits :
The fine bubble membrane which has one year guarantee is specially formulated for waste water chemical environment. The standard ¾” diffuser pipe thread makes it convenient to replace other coarse/old bubble diffusers. The precision perforated “I” shaped slit holes open when airflow comes, close when airflow pressure drops, resist tearing and stay clean longer.
Specifications
| COARSE BUBBLE DIFFUSER | MODEL ATI -CBD - 150 | MODEL ATI -CBD - 80 |
|---|---|---|
| Shape of Aerator | Disc Type | Disc Type |
| Moc of Membrane | EPDM | EPDM |
| Size of Aerator | 150 MM DIA. | 80 MM DIA |
| Type of Bubble | Coarse Bubble | Coarse Bubble |
| Size of Bubbles | 4.0 mm to 5.0 mm | 4.0 mm to 5.0 mm |
| Air Flow Rate | 4 - 10 CUM/HR | 1 - 5 CUM/HR |
| Moc of Membrane Support | ABS | ABS |
| Operating Temperature Range | 35 Deg. Celsius | 35 Deg. Celsius |
| Temperature Tolerance | Max 85 Deg. Celsius | Max 85 Deg. Celsius |
| Size of End Connection | ½” BSP, male | 1” BSP, male |
| Type of Air Discharge | Peripheral Air Discharge | Peripheral Air Discharge |
| No. of Air Discharge Ports | 8 Nos. | 10 Nos. |
Specifications
| Model | A TI-DD-9 | A TI-DD-12 |
|---|---|---|
| Shape of aerator | Disc type | Disc type |
| Moc of membrane | EPDM | EPDM |
| Size of aerator | 9” | 12” |
| Type of bubble | Fine bubble | Fine bubble |
| Size of bubbles | 0.8 mm – 2.1 mm | 0.8 mm – 2.1 mm |
| Air flow rate | 2.5 – 5.0 cum/hr | 4.2 – 8.3 cum/hr |
| Flow range | 0 -12.0 cum/hr | 0 – 20.0 cum/hr |
| Moc of membrane support | ABS | ABS |
| Active surface area | 0.0375 | 0.0650 sqm |
| Operating temperature range | 35 deg. cel | 35 deg. cel |
| Temperature tolerance | Max 85 deg. cel | max 85 deg. cel |
| Oxygen utilization ratio (%) | 30 | 30 |
| Size of end connection | 3/4” Npt, male | 3/4” Npt, male |
| Slit quantity | 6600 | 10155 |
| Weight | 0.680 kg | 1.4 kg |
