Other Products / Services #352102

Machine designed as per NHAIspecifications, Powerful diesel engine drives hydraulic, and pneumatic systems, Hydraulic system for propelling vehicle, agitator, and paint flow, Compressed air for glass beadspray and cleaning brush attachment, Thermopac for indirectheating of paint, Extruder shoe adjustable.

Individual sections to be joined together to suit the panel width, Individual sections carry eccentric shaft; hence uniform vibrations throughout the vibrator length, Option of manual or electric winch, Turnbuckle provided to give camber at each joint up to 10 mm.

Everyone looks for ways to improve their business and make it more profitable. But a chain is never stronger than its weakest link. The core focus for HTC is to keep developing the ultimate flooring system. HTC believes in a system where all parts are made to match, all the way from the tools to the grinder and finally, the dust extractor.For efficient dust collection a competent dust extractor is required. HTCs dust extractors comes in several sizes, ranging from the handy HTC GL 25 D to the powerful, remote controlled HTC 80 iD. Dust collection is a crucial part of the grinding process, from the health point-of-view but also to prevent surrounding areas being filled with dust.

The DDR 625 is a twin drum vibratory roller, ideal for compacting soil and asphalt. The machine is hydraulic and hence allows an overhang of only 7 cms, thus enabling the roller to run close to obstructions, such as walls. It is equipped with a large water tank and a push stop lever.Head Light for night-time operation, Water Sprinkler Bars on drums, Throttle control Lever - stepless.

Powered by 20 or 24 HP petrol engine, Different rotor diameters 900 mm and 1200 mm are available, Two separate control levers for controlling the machine travel, Equipped with water tank and sprinkler mechanism, Two navigation lights, Easy change of discs and blades.

The process essentially comprises of concrete levelling by Surface Vibrators, removal of excess water with the help of Vacuum Pump and Suction Mats, and finishing the hardened concrete by Skimfloater Power Trowel. If applied correctly, this process gives definite advantages i.e. higher compressive strength, even finish, better joints, increased wear resistance, less curing time etc. (please refer the Product catalogue for more information). The key part in this process is the Vacuum Pump, Top Cover and Filter Pads as the performance of these determines the effectiveness of the process. Bubble shaped Filter pads gives the best results as there is always free space for water to flow. The substitutes which are commonly found on sites are made of Nylon nets and do not dewater the concrete correctly as there is no passage for water to flow. The effectiveness of dewatering can be easily seen after the dewatering is stopped. For correct dewatering, the filter pads remain clean without any slurry sticking to them and concrete surface completely dry. Another test is the dewatering time; it should be done for 1 1.5 minutes per centimetre thickness of concrete. Dewatering time depends on thickness and not on area being dewatered.

Concrete Scarifier VA 30 S FR 200 Loosely fitted cutters on drum produce heavy impact on surface, thus removing top layer. Parking brake provided for machine safety. Different types of cutters are available to suit different applications. Choice of different prime movers i.e. electric motor, petrol, or diesel engine. Wide range of applications. Providing skid-free texture on concrete road bridge wearing course. Profile correction on concrete pavements. Maintaining the desired coefficient of friction on airport runways. Providing a mechanical key on industrial floors to ensure proper bonding between the base concrete floor and the synthetic overlay.

Loosely fitted cutters on drum produce heavy impact on surface, thus removing top layer.Parking brake provided for machine safety.Different types of cutters are available to suit different applications.Profile correction on concrete pavements.Providing a mechanical key on industrial floors to ensure proper bonding between the base concrete floor and the synthetic overlay.

Double Beam Surface Vibrator type SM is a high efficiency and light weight machine for obtaining properly levelled and compacted concrete surface.Made from light weight, hollow, Aluminum alloy beams. Vibrations adjustable from 30% to 100%. Suitable for concrete depths up to 300 mm in conjunction with poker vibrators. Tensioning device for level correction.

Option of pouring either off-centre with model C 101 (i.e. left side) or between center with model CG 200 (i.e. between two rear wheels) depending upon size of the profile. Option of using hoppers of different sizes to suit the profile. Suitable for concrete depths up to 300 mm in conjunction with poker vibrators. Self adjusting Cross Slope facility provided to ensure mould in correct position irrespective of lateral movement of hopper.

Kerb Laying Machine Option of pouring either off-centre with model C 101 (i.e. left side) or between center with model CG 200 (i.e. between two rear wheels) depending upon size of the profile. Option of using hoppers of different sizes to suit the profile. Suitable for concrete depths up to 300 mm in conjunction with poker vibrators. Self adjusting Cross Slope facility provided to ensure mould in correct position irrespective of lateral movement of hopper. Flexibility of using 2 or 3 hydraulic pokers depending upon size of hopper and profile. Sufficient traction is available for pouring profiles in line and level. Favourable power : weight ratio. High output of up to 12 mminutes depending upon size of profile.

Two speed operation for electric version, Dead mans grip for operator safety, Adjustable and foldable handle, Dual function floating and trowelling, Easy change-over from disc to blades, Blade angle adjustable while machine is in operation, All controls on handle, easily accessible, Also ideally suitable for Epoxy Screed finishing, Available in two diameters 900 mm and 700 mm.

MINI AVANT G is an innovative piston pump that can deliver aggregates up to 6 mm in size, guaranteeing high performance with low operating and maintenance costs.Lightweight mortars for heat and sound insulation, fire-resistant mortars and special cement mortars. These mixtures can be used as bedding for brickwork or applied on indoor and outdoor walls and ceilings with spray guns, either as a coating layer or final finishing or for restoration and improvement work.

HTC's floor polishing and grinding machines are appreciated by thousands of customers all over the world. The diamond floor grinders are available in several different sizes and versions depending on your needs and demands. As the leading made and supplier of floor grinding equipment HTC has the largest range of products. HTC floor grinders cover everything from edges to huge areas of thousands of square meters and are suitable for floor preparation, grinding and polishing of for example natural stone, concrete and wooden floors.

The core focus for HTC is to keep developing the ultimate flooring system. HTC believes in a system where all parts are made to match, all the way from the tools to the grinder and finally, the dust extractor.

A high quality concrete floor or pavement requires not only to be level but it should also have high wear resistance, high compressive strength, reduced shrinkage and minimum water permeability.

The method involves grinding away the concrete skin and exposing the underlying, stronger concrete, in the form of fine material. Normally, 1 mm of the surface is ground away.The floor is ground smooth and the glossy surface makes the floor easy to clean and more resistant to tire marks from forklifts and dirt. Moreover, the light is reflected in a pleasant way.The floor is ground and polished according to a well established and tested method, using HTC's machines and HTC's diamond tools and in accordance with HTC's grinding guide.The floor receives a completely smooth and glossy surface with many excellent qualities, both functionally and aesthetically.

Silver is the concept to choose if you want to obtain the characteristics of a well-ground floor and a matt surface. The result is an unbeatably durable floor. The method involves grinding away the concrete skin and exposing the underlying, stronger concrete, in the form of fine material, gravel and, where possible, aggregate. Normally, 2 - 3 mm of the surface is ground away.The floor is polished according to a well-established and tested method, using HTC's machines and HTC's diamond tools and in accordance with HTC's grinding guide.

Bronze is a concept solely consisting of polishing steps. This concept does not expose fine material, gravel or larger aggregates. The concrete skin is polished without grinding it away, and the polished surface makes the floor easy to clean and more resistant to tire marks from forklifts and dirt. Moreover, light is reflected in a pleasant way.

Platinum is the concept that gives the floor the best characteristics and it is the one HTC recommends in the first instance. It involves more grinding steps than in the other concepts. The result is an unbeatably durable floor. The method involves grinding away the concrete skin and exposing the underlying, stronger concrete, in the form of fine material, gravel and, where possible, aggregate. Due to the nature of the concrete construction, the larger aggregate may be exposed unevenly in the surface. Normally, 2 - 3 mm of the surface is ground away.

Grinding & Polishing Technology is a value addition to the existing methods of making high quality Concrete Floors. In conventional floors, the top skin of cement+ Sand is removed to expose the aggregates. This exposed surface is then polished to make it shine.Steps 1 to 3 : Grinding the top surface to remove skin and expose aggregate, This is done with HTC's diamond tools in several steps with gradually smaller and smaller grit sizes. The process consists of grinding, refinement, impregnation and polishing. This procedure gives the surface a high gloss polish and all the qualities that characterize a real HTC SuperfloorTM.

Based upon substantial research and development, testing and experience, HTC produces a unique range of diamond tools to cover all the different type of procedures possible with the HTC diamond grinders. There are diamond tools suitable for anything from very rough grinding equal to scarifying to high gloss polishing of natural stone or concrete. Each tool has an explanation of its primary application.