Ahmedabad, Gujarat, India
Verified
Add Review
Our Product / Services
Technical Specification
| Parameter | Specification |
|---|---|
| Physical state | Liquid at 24±2ºC, free from visible impurities |
| pH of 3% (v/v) sample in 10% (w/v) KCl solution in distilled water | 6.0 – 7.5 |
| Surface Tension of 3% (v/v) sample in 10% (w/v) KCl solution in distilled water, dynes / cm |
45± 5 |
| Hydroxyl Value, mg KOH / g of sample | 300- 360 |
| Iodoform test for confirmation of presence of α-carbon in sample | Positive |
| Apparent Viscosity of treated (3%, v/v, sample) hot rolled (100ºC, 18 hrs.) base mud at 24±2ºC, cP |
Not less than the value obtained for hot rolled base mud |
| Yield Point of treated (3%, v/v, sample) hot rolled (100ºC, 18 hrs.) base mud, lbs./100 sq. ft. |
Not less than the value obtained for hot rolled base mud |
| Lubricity Coefficient of treated (3% v/v, sample) hot rolled (100ºC, 18 hrs.) base mud |
Not more than 80% of the value obtained for hot rolled base mud |
| HP-HT Filtration Loss (500 psi, 100ºC) of treated (3% v/v, sample) hot rolled (100ºC 18 hrs.) base mud, ml |
Not more than 70% of the value obtained for hot rolled base mud |
| Cloud Point of 3% (v/v) sample in 10% (w/v) KCl in distilled water, ºC | 75 -87 |
FLUID SYSTEMS
Water Based Mud (WBM)
Bentonite/Spud mud
Gypsum/Lime
Potassium Chloride and Potassium Carbonate Systems
Saturated Salt Systems
Sodium & Potassium Silicate Systems
Glycol Systems
Polyamine Systems (HPWBM)
Mixed Metal Oxide System
High Temperature High Pressure Systems
Invert emulsion drilling fluids
Low toxic, invert emulsion Systems
Synthetic based HTHP Systems
Reservoir fluid systems
Drill-in fluids Systems
Filer cake removal breakers
PRODUCTS
Commercial chemicals
Fluid Loss agents
Synthetic based fluid chemicals
Lubricants
Viscosifiers
Clay and shale stabilisers
Flocculants and dispersants
Lost circulation materials
Specialty products
Weighting materials
Specification
| Appearance | Crystalline Powder |
|---|---|
| Assay (%) | 96.0 min |
| Chloride (%) | 1.0 max |
| pH, 5% aqueous solution | 6.5 – 8.5 |
| Water (%) | 3.0 max |
Cenospheres are light weight, inert, hollow speres of Silica and Alumina filled with gas which naturally occurs in the combustion of coal. The properties are same as manufactured sphered products. Thus it is also called as Glass beads.
Specification
| Appearance | Crystalline Powder |
|---|---|
| Assay (%) | 94.0 min |
| Chloride (%) | 3.0 max |
| Impurity (%) | 1.0 max |
| Water (%) | 0.5 max |
| Mesh | 40 - 80 |
