Aries Engineers

Mira Bhayandar, Thane, Maharashtra

Aries Fabricators lead bonding/lining division is known for its high quality finish. We execute lead bonding activities by procuring 99.97% pure lead ingot imports from Australia. The surface of the Reactor is cleaned by sand blasting it after total fabrication of the reactor. Lead sticks derived from lead ingots are then bonded with the vessel. Lead bonding and lining is generally used in reaction of anti-corrosive and acidic components.

• Congo Red Test or HCL Acid Test
1. Homogenous lead bonding tests are conducted to ensure quality and proper application of lead bonding/lining on the equipment.
• Stirrer Types:
1. Anchor stirrers used for high density materials moving at slow RPM (15 to 60 RPM Maximum)
2. Propeller stirrers used for medium density materials moving at steady RPM (100 to 300 RPM Maximum)
3. Turbine stirrers used for low density materials moving at high RPM (100 to 1000 RPM Maximum)
4. Cutter stirrers used for particular processes moving at very high RPM

1. Capacity Range: 450 to 15000 liters
2. GMP and non-GMP models available
3. MOC Mild Steel
4. Custom build Aries Recommended or as per client drawings

MS Aries Fabricatorss rubber lining division provides cost-effective and durable rubber lined reactors to industries where corrosive and abrasive protection are a number one priority. Whether your application calls for natural rubber, nitrile rubber, or a thermoplastic PVC like Koroseal, Aries Fabricators Pvt Ltdhas the expertise to protect your Reactor tanks, pipes or other metal fabricated products.

• Testing
1. Spark Testing: To ensure no pinholes are present after applying rubber lining to the equipment.
2. Shore Hardness testing: For quality assurance of the rubber used.

• Stirrer Types:
1. Anchor stirrers used for high density materials moving at slow RPM (15 to 60 RPM Maximum)
2. Propeller stirrers used for medium density materials moving at steady RPM (100 to 300 RPM Maximum)
3. Turbine stirrers used for low density materials moving at high RPM (100 to 1000 RPM Maximum)
4. Cutter stirrers used for particular processes moving at very high RPM
• Shore Hardness testing:
1. For quality assurance of the rubber used.

• Soft Natural: 35 to 65 Shore A durometer hardness
• Semi Hard Natural: 80 to 95 Shore A durometer hardness (normally backed with a soft rubber tie gum)
• Hard Natural (Ebonite): 100+ Shore A durometer hardness (Sulphur content exceeding 40 parts)
• Chlorobutyl: 45 to 65 Shore A durometer hardness (1% chlorine with excellent impermeability to gases and good heat resistance)
• Neoprene: 35 to 80 Shore A durometer hardness (polymerization of chloroprene)

* Other custom formulations are also available.

1. Capacity Range: 450 to 15000 liters