The Horizontal Pharma Peeler is a batch type automatic / semi automatic filtering centrifuge. The axis of rotation of the basket in this centrifuge is horizontal. It is ideally suited for a clean room installation – ”through the wall” using a flexible membrane as required in pharmaceutical applications.  

This type is an improvement on the basic Manual Top Discharge Centrifuge. The machine has a dynamically balanced rotating basket with a conical shell for easy removal of filter bag with solid material. Our compact spring assisted lifting mechanism enables opening of lid by a single person. Alternatively, Hydraulic or Pneumatic arrangement can also provided. Key Feature:  Our locking system for basket top does not allow the machine to start unless all basket locks are properly engaged.

Twin shaft disperser machine is suitable for mixing of ointments, inks, sauces, pastes, foam, used in the pharmaceutical, food, chemical and allied industries. The mixing blades revolve in opposite direction to sweep the entire circumference of the vessel as well as rotate around its own axis. Intimate mixing is achieved in short intervals. The mixing elements are raised vertically by an electric or hydraulic lifting or lowering arrangement. The vessel can be removed and next batch can be kept ready for processing in these Twin Shaft Disperser. Mixing elements can be cleaned completely with vessel removed or by rotating the blades in the vessel loaded with solvent. A high speed emulsifier is provided in the center of Twin Shaft Disperser machine for thorough mixing of the mass.     Technical Features: Construction: Stainless Steel Mild Steel Control Panels: Multi speed control using suitable Variable Frequency Drive and Motor for both high and low speed stirrers. Safety Controls: Limit Switch for Hydraulic system Emergency stop. Handling: Hydraulic lifting & lowering (ON/OFF). Automation and logic:   Features: Better Services Lives Robust Construction Easy Installation Safe Operations Corrosion & abrasion resistant surface finish

A   Fixed Tube Sheet Heat Exchanger   is the most common type of heat exchanger in all industries. Mostly used in higher-pressure and higher temperature applications. Fixed Tube Sheet heat exchangers are the most widely used heat exchangers in chemical industries and refinery services, as there is no chance on intermixing of fluids. This type of heat exchanger is employed where even slightest intermixing of fluids can not be tolerated. A fixed-tube sheet heat exchanger has straight tubes that are secured at both ends to tube sheets welded to the shell. The construction may have removable channel covers , bonnet-type channel covers , or integral tube sheets. The principal advantage of the fixed tube sheet construction is its low cost because of its simple construction.

The process of filtration is similar to other types of centrifuges, the difference being in the method of unloading the solids. The scraper cuts the solid cake while the basket is rotating at a slow speed. The solids are discharged through openings provided in the Basket bottom and Bottom Base / Inertia Plate.  

A second shell is installed over a portion of the vessel, creating an annular space within which cooling or heating medium flows. A simple conventional jacket, with internal stiffener ring components, is generally efficient for heat transfer when the flow media is Steam or Dowtherm. Internals include baffles that direct flow in a spiral pattern around the jacket, and agitating nozzles that cause high turbulence at the point where the fluid is introduced into the jacket.   Technical Features: Capacity Range: 450 to 15000 liters GMP and non-GMP models available Custom build – Aries Recommended or as per client drawings M.O.C = Mild Steel/Stainless steel Stirrer Types: Anchor stirrers used for high density materials moving at slow RPM (15 to 60 RPM Maximum) Propeller stirrers used for medium density materials moving at steady RPM (100 to 300 RPM Maximum) Turbine stirrers used for low density materials moving at high RPM (100 to 1000 RPM Maximum) Cutter stirrers used for particular processes moving at very high RPM  

The Horizontal Pharma Peeler is a batch type automatic / semi automatic filtering centrifuge. The axis of rotation of the basket in this centrifuge is horizontal. It is ideally suited for a clean room installation – ”through the wall” using a flexible membrane as required in pharmaceutical applications.  

AIR RECEIVER   Aries Fabricators are one of the leading manufacturer & supplier of a wide range of Air Receivers. These Air receivers are properly engineered by our experts and are designed under stringent production codes with features like mounting safety and control devices. It can also be manually or automatically drained by an auto drain valve as per your convenience. Air Receivers also helps minimize power costs and our company can also recommend optimum volumes for your Compressed Air System. Properly engineered & sized to take into account fluctuating air demand of the user devices. Designed & manufactured under stringent fabrication codes with provision for mounting safety & control devices.     Features: Built as per Indian/Foreign Standards Capacities can be designed as per client’s requirements Available in horizontal as well as vertical models

Twin shaft disperser machine is suitable for mixing of ointments, inks, sauces, pastes, foam, used in the pharmaceutical, food, chemical and allied industries. The mixing blades revolve in opposite direction to sweep the entire circumference of the vessel as well as rotate around its own axis. Intimate mixing is achieved in short intervals. The mixing elements are raised vertically by an electric or hydraulic lifting or lowering arrangement. The vessel can be removed and next batch can be kept ready for processing in these Twin Shaft Disperser. Mixing elements can be cleaned completely with vessel removed or by rotating the blades in the vessel loaded with solvent. A high speed emulsifier is provided in the center of Twin Shaft Disperser machine for thorough mixing of the mass.     Technical Features: Construction: Stainless Steel Mild Steel Control Panels: Multi speed control using suitable Variable Frequency Drive and Motor for both high and low speed stirrers. Safety Controls: Limit Switch for Hydraulic system Emergency stop. Handling: Hydraulic lifting & lowering (ON/OFF). Automation and logic:   Features: Better Services Lives Robust Construction Easy Installation Safe Operations Corrosion & abrasion resistant surface finish

One of the simplest types of centrifuge widely used in the industry. The solid material is scooped out manually from the top of the centrifuge. Types: cGMP Model Non GMP Model MS Rubber Lined Model MS or SS Halar Coated Model FRP Lined Model Variants (Based on size) : 24 inch MTD 36 inch MTD 46 inch MTD 60 inch MTD Custom Built

The process of filtration is similar to other types of centrifuges, the difference being in the method of unloading the solids. The scraper cuts the solid cake while the basket is rotating at a slow speed. The solids are discharged through openings provided in the Basket bottom and Bottom Base / Inertia Plate.  

MS Aries Fabricators’s rubber lining division provides cost-effective and durable rubber lined reactors to industries where corrosive and abrasive protection are a number one priority. Whether your application calls for natural rubber, nitrile rubber, or a thermoplastic PVC like Koroseal,   Aries Fabricators Pvt Ltd  has the expertise to protect your Reactor tanks, pipes or other metal fabricated products.     Test Procedures Conducted Testing Spark Testing: To ensure no pinholes are present after applying rubber lining to the equipment. Shore Hardness testing: For quality assurance of the rubber used. Stirrer Types: Anchor stirrers used for high density materials moving at slow RPM (15 to 60 RPM Maximum) Propeller stirrers used for medium density materials moving at steady RPM (100 to 300 RPM Maximum) Turbine stirrers used for low density materials moving at high RPM (100 to 1000 RPM Maximum) Cutter stirrers used for particular processes moving at very high RPM Shore Hardness testing: For quality assurance of the rubber used. Different types of Rubber that can be used: Soft Natural: 35 to 65 Shore A durometer hardness Semi Hard Natural: 80 to 95 Shore A durometer hardness (normally backed with a soft rubber tie gum) Hard Natural (Ebonite): 100+ Shore A durometer hardness (Sulphur content exceeding 40 parts) Chlorobutyl: 45 to 65 Shore A durometer hardness (1% chlorine with excellent impermeability to gases and good heat resistance) Neoprene: 35 to 80 Shore A durometer hardness (polymerization of chloroprene) * Other custom formulations are also available. Technical Features: Capacity Range: 450 to 15000 liters