Arihant International

Jodhpur, Rajasthan

Stainless Steel Square Nuts Details:-

• Made from BS 2874 CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Stainless Steel BS 2874 CZ 131
• CW 614 N EN 12164 BS 2874 CZ 114 BS 2874 CZ 115

Stainless Steel Square Nuts These Stainless Steel Square Nuts are cold forged or hot stamped parts

Stainless Steel Wing Nuts, Hex Nuts, Nuts Hex, Stainless Steel Full Nuts, Nuts Full, Lock Nuts, Nuts Lock, Hex Rivet Nut, Rivet Nut, Nut Rivet, Stainless Steel square Nuts, Nuts Square, Panel Nuts.

Threads of Stainless Steel Nuts and Stainless Steel inserts: Metric, NPT, BSP, BSPT, NPTF, UNEF, UNS, UNF, BSF, UNC, NPS, NPSM, BSW

Sizes of Stainless Steel Square Nuts DIn 315 Stainless Steel Square Nuts : 3mm 32mm 33mm 40mm 50mm M3 M4 M5 M6 M8 m10 m12 m16 M18 M20 M24 M25 M26 M28 M30 M32 M40 M50 1/8 5/32 3/16 1/4 5/16 3/8 1/2 7/8 3/4 1 11/4 11/2 2 2/12 4mm 5mm 6mm 8mm 10mm 12mm 16mm 18mm 20mm 24mm 25mm 26mm 28mm 30mm

If you need special size and configuration or if you would like to place an order for Stainless Steel Square Nuts or Stainless Steel Fasteners products with plating pleaseContact Us

Stainless Steel Wing Nuts Details-

• Made from BS 2874 CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Stainless Steel BS 2874 CZ 131
• CW 614 N EN 12164 BS 2874 CZ 114 BS 2874 CZ 115

Stainless Steel Wing Nuts These Stainless Steel wing nuts are cold forged or hot stamped parts

Standard:-

To DIN 315

Size:-

Stainless Steel Wing Nuts Stainless Steel Metric Wing Nuts Any size as per custom design or requirement.

• Stainless Steel Check Nuts
• Stainless Steel Wing Nuts
• Stainless Steel Machine screw Nuts
• Stainless Steel slotted Hex nuts
• Stainless Steel Hex spacers Nuts and Standoffs
• Stainless Steel hexagonal Coupling Nuts
• Stainless Steel Male Female Pillars

We also produce:-

Stainless Steel Wing Nuts, Hex Nuts, Nuts Hex, Stainless Steel Full Nuts, Nuts Full, Lock Nuts, Nuts Lock, Hex Rivet Nut, Rivet Nut, Nut Rivet, Stainless Steel square Nuts, Nuts Square, Panel Nuts.

Threads of Stainless Steel Nuts and Stainless Steel inserts: Metric, NPT, BSP, BSPT, NPTF, UNEF, UNS, UNF, BSF, UNC, NPS, NPSM, BSW

Sizes of Stainless Steel Wing Nuts DIn 315 Stainless Steel Wing Nuts : 3mm 32mm 33mm 40mm 50mm M3 M4 M5 M6 M8 m10 m12 m16 M18 M20 M24 M25 M26 M28 M30 M32 M40 M50 1/8 5/32 3/16 1/4 5/16 3/8 1/2 7/8 3/4 1 11/4 11/2 2 2/12 4mm 5mm 6mm 8mm 10mm 12mm 16mm 18mm 20mm 24mm 25mm 26mm 28mm 30mm

Specification:-

• BS 4183 BS 57
• BS 3643 BS 93
• IS 1367 / 1366

Stainless Steel Dome Nuts Material:-

In case of Turned Machine Screw:

• Free Cutting Stainless Steel IS 319 Type (I) or
• Free Cutting Stainless Steel As Per BS 249 Type (I) or
• High Grade Free Cutting Stainless Steel
• Any special Stainless Steel material composition as per customers requirement

In case of Cold Forged Machine Screw:

• Stainless Steel as per IS 4413 or
• BS 2874/Cz108 or
• High grade mild steel

Finish and Coating Available in Fasteners:-

Natural, Nickel Plated, Tin Plated, Natural Brass or any coating as per customer specification.

Threads:-

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF Threads
• Any threads as per custom design.

Fasteners Length / Size:

As per specifications or custom designs.

Threads of BrassDomeNuts :-

Metric, NPT, BSP, BSPT, NPTF, UNEF, UNS, UNF, BSF, UNC, NPS, NPSM, BSW

Sizes of Stainless Steel Dome Nuts:-

3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 18mm 20mm 24mm 25mm 26mm 28mm 30mm 32mm 33mm 40mm 50mm M3 M4 M5 M6 M8 m10 m12 m16 M18 M20 M24 M25 M26 M28 M30 M32 M40 M50 1/8 5/32 3/16 1/4 5/16 3/8 1/2 7/8 3/4 1 11/4 11/2 2 2/12

Compression Fittings Range from 45 Degree & 90 Degree Elbows, Couplings, Unions, Elbow Tube To FPT, Elbow Tube to MPT, Elbow 45 Tube to MPT.

Specification:-

• Material:- Brass, Any special brass material compositions as per customers requirement
• Material Grades: -CuZn39Pb3, CW614N, CW602N, CZ132, C35330, SS-5170
• Size:-1/8 OD to 7/8 OD
• Surface:- Nickel plated, or Chrome plated

Features:-

• Rigid structure
• Durability
• Resistant to corrosion

Capabilities:-

• Bar capacity: from 2 3/8 inches diameter down to 3/16 diameter
• Tolerances of up to 0.0001
• Run size: specializing in low to medium volume runs from 500 to 20, 000 pieces, but we have the capability for even larger runs
• Parts can be produced with features such as threads, milled flats, knurls, cross holes, and trepan
• Finishing:- Polished, Diamond Knurling, Straight Knurling
• Plating:- In Micron (Nickel, Zinc, Tin, Chrome, and Brass & as per requirement)

Threads:-

• ISO Metric (M), (UTS), (UNC), (UNEF), (NPT), (BSP), (BSPT), (BSW), (BSF), (BA)

The Brass Compression Fittings, Brass Pipe Fittings, and Brass Flare Fittings offered by Arihant International are fabricated using quality raw material. Designed using advanced technology, our range is known for its dimensional accuracy, high strength and better durability standards. These fittings are standard compliant and provided by Arihant International at industry leading prices.

Our Brass Fittings Part, that are available in various sizes and specifications. Made using the best quality brass, these exhibit corrosion resistance, high tensile strength and long life. Brass fittings Parts are available in different sizes and dimensions in order to requirements of the clients.

Brass Flare Fittings Range of Long Flare Nut Machined, Sort Flare Nut machined, Flare Nut Long Neck, Flare Nut Sort Neck, Connector Tube to MPT, Union Tube to Tube Ends etc.

Specification:-

• Material Grades: -CuZn39Pb3, CW614N, CW602N, CZ132, C35330, SS-5170
• Material:- Brass, Any special brass material compositions as per customers requirement
• Size:-3/16 to7/8
• Surface:- Nickel plated, or Chrome plated

Features:-

• Accurate dimensions
• Rust free
• Sturdy construction

Capabilities:-

• Bar capacity: from 2 3/8 inches diameter down to 3/16 diameter
• Tolerances of up to 0.0001
• Run size: specializing in low to medium volume runs from 500 to 20, 000 pieces, but we have the capability for even larger runs
• Parts can be produced with features such as threads, milled flats, knurls, cross holes, and trepan
• Finishing:- Polished, Diamond Knurling, Straight Knurling
• Plating:- In Micron (Nickel, Zinc, Tin, Chrome, and Brass & as per requirement)

Threads:-

• ISO Metric (M), (UTS), (UNC), (UNEF), (NPT), (BSP), (BSPT), (BSW), (BSF), (BA).

The Brass Compression Fittings, Brass Pipe Fittings, and Brass Flare Fittings offered by Arihant International are fabricated using quality raw material. Designed using advanced technology, our range is known for its dimensional accuracy, high strength and better durability standards. These fittings are standard compliant and provided by Arihant International at industry leading prices.

Our Brass Fittings Part, that are available in various sizes and specifications. Made using the best quality brass, these exhibit corrosion resistance, high tensile strength and long life. Brass fittings Parts are available in different sizes and dimensions in order to requirements of the clients.

Brass Flare Fittings Range of Long Flare Nut Machined, Sort Flare Nut machined, Flare Nut Long Neck, Flare Nut Sort Neck, Connector Tube to MPT, Union Tube to Tube Ends etc.

Specification:-

• Material Grades: -CuZn39Pb3, CW614N, CW602N, CZ132, C35330, SS-5170
• Material:- Brass, Any special brass material compositions as per customers requirement
• Size:-1/4 x 1/4 to3/4 x 3/4
• Surface:- Nickel plated, or Chrome plated

Features:-

• Accurate dimensions
• Rust free
• Sturdy construction

Capabilities:-

• Bar capacity: from 2 3/8 inches diameter down to 3/16 diameter
• Tolerances of up to 0.0001
• Run size: specializing in low to medium volume runs from 500 to 20, 000 pieces, but we have the capability for even larger runs
• Parts can be produced with features such as threads, milled flats, knurls, cross holes, and trepan
• Finishing:- Polished, Diamond Knurling, Straight Knurling
• Plating:- In Micron (Nickel, Zinc, Tin, Chrome, and Brass & as per requirement)

Threads:-

• ISO Metric (M), (UTS), (UNC), (UNEF), (NPT), (BSP), (BSPT), (BSW), (BSF), (BA).

The Brass Compression Fittings, Brass Pipe Fittings, and Brass Flare Fittings offered by Arihant International are fabricated using quality raw material. Designed using advanced technology, our range is known for its dimensional accuracy, high strength and better durability standards. These fittings are standard compliant and provided by Arihant International at industry leading prices.

Our Brass Fittings Part, that are available in various sizes and specifications. Made using the best quality brass, these exhibit corrosion resistance, high tensile strength and long life. Brass fittings Parts are available in different sizes and dimensions in order to requirements of the clients.

Specification:-

• BS 4183 BS 57
• BS 3643 BS 93
• IS 1367 / 1366

Brass Dome Nuts Material:-

In case of Turned Machine Screw:

• Free Cutting Brass IS 319 Type (I) or
• Free Cutting Brass As Per BS 249 Type (I) or
• High Grade Free Cutting Brass
• Any special brass material composition as per customers requirement

In case of Cold Forged Machine Screw:

• Brass as per IS 4413 or
• BS 2874/Cz108 or
• High grade mild steel

Finish and Coating Available in Fasteners:-

Natural, Nickel Plated, Tin Plated, Natural Brass or any coating as per customer specification.

Threads:-

• ISO Metric (MM Threads)
• BA Threads
• BSW Threads (Inches)
• UNC, UNF Threads
• Any threads as per custom design.

Fasteners Length / Size:

As per specifications or custom designs.

Threads of BrassDomeNuts :-

Metric, NPT, BSP, BSPT, NPTF, UNEF, UNS, UNF, BSF, UNC, NPS, NPSM, BSW

Sizes of Brass Dome Nuts:-

3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 18mm 20mm 24mm 25mm 26mm 28mm 30mm 32mm 33mm 40mm 50mm M3 M4 M5 M6 M8 m10 m12 m16 M18 M20 M24 M25 M26 M28 M30 M32 M40 M50 1/8 5/32 3/16 1/4 5/16 3/8 1/2 7/8 3/4 1 11/4 11/2 2 2/12

Brass Square Nuts Details:-

• Made from BS 2874 CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 CZ 131
• CW 614 N EN 12164 BS 2874 CZ 114 BS 2874 CZ 115

Brass Square Nuts These Brass Square Nuts are cold forged or hot stamped parts

Brass, Wing, Nuts, Wing Nut, Wing Nuts, Brass Square Nuts, Brass Wing Nut, Hex Nuts, Nuts Hex, Brass Full Nuts, Full Nuts, Nuts Full, Lock Nuts, Nuts Lock, Hex Rivet Nut, Rivet Nut, Nut Rivet, Brass square Nuts, Nuts Square, Panel Nuts,

Threads of Brass Nuts and Brass inserts: Metric, NPT, BSP, BSPT, NPTF, UNEF, UNS, UNF, BSF, UNC, NPS, NPSM, BSW

Sizes of Brass Square Nuts DIn 315 Brass Square Nuts : 3mm 32mm 33mm 40mm 50mm M3 M4 M5 M6 M8 m10 m12 m16 M18 M20 M24 M25 M26 M28 M30 M32 M40 M50 1/8 5/32 3/16 1/4 5/16 3/8 1/2 7/8 3/4 1 11/4 11/2 2 2/12 4mm 5mm 6mm 8mm 10mm 12mm 16mm 18mm 20mm 24mm 25mm 26mm 28mm 30mm