Our Products #5872764

With the valuable assistance of a skilled team of professionals, we are offering an extensive range of high qualityPITEX RO Water Purifier. We have a team of highly skilled and experience procurements agents that source only quality oriented products from the vendors end. We ensure our customers that all our products are precisely tested against various quality parameters at our in house testing unit. Highly used in various industrial, commercial and residential places, these are offended at industry competent prices.

Features:

• High performance
• Optimum functionality
• Resistant against corrosion

Product Features:

• 75 GPD high pressure pump of BNQS
• N.F.S. Approved, leak proof connectors, fittings and tubes
• N.F.S. approved, non-toxic filter housing made up of food grade polymers
• Fully automatic system with auto ON/OFF facility
• High purifying capacity of CSM membrane which produces 12 liter water per hour. Purifies impure water to sweet pure drinking water Removes bacteria and virus
• Availability of water as per requirement, even in absence of electricity
• Low cost of maintenance and consumables

Different stages of treating water:

• Stage 1 5-Micron Sediment Filter:With five micron rating, it is effective in removing dirt, rust and sand particles
• Stage 2 5-Micron Inline Sediment Filter: With five micron rating, it is effective in removing dirt, rust and sand particles
• Stage 3 Granular Activated Pre Inline Carbon Filter: It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color
• Stage 4 Reverse Osmosis Membrane:A thin film composite high quality Aquaa care membrane processes 75 gallons water per day. It removes the hard water contaminants that may be present in water, like lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite and selenium. It also removes Bacteria and Virus from water
• Stage 5 Post Carbon Inline Filter:It removes objectionable tastes and odors to enhance the quality of drinking water
• Stage 6 Ultra Violet Tube:It removes Bacteria & Virus through ultra violet rays

Reverse Osmosis (RO) is the process, in which water is pressurized through a semi permeable membrane. As a result of this, as shown in the below depicted schematic diagram, water will pass through the membrane surface while the dissolved and particulate materials are left behind. When the pressure is applied to the concentrated solution, water is forced through the membrane from the concentrated side to the dilute side. This process is known asReverse Osmosis.

Applications:Industry, School, College, Complex, Building, Village, Hostel, Restaurent, Hotel, Mineral water Plant and any other commercial application.

Range Available:100 LPH (Liter Per Hour), 250 LPH, 500 LPH, 1000 LPH, 1500 LPH, 2000 LPH, 2500 LPH, 5000 LPH, 10000 LPH. And as per client requirments.

Technical details of Industrial RO Plant:

• Raw Water Feed Pump
• Pressure Sand Filter
• Activated Carbon Filter
• 20 Micron Cartridge Spun Filter
• 5 Micron Cartridge Spun Filter
• Anti Scalene Dosing System
• High Pressure Pump
• RO Elements
• Skid
• Auto Panel
• Pressure Gauge
• Rota Meter
• Low Pressure / High Pressure Switches

Features:Easy installation

• Excellent functionality
• High strength
• Energy efficiency.

The RO Plant available in Fully SS and SS FRP material. The RO Plant mounted on SS Skid.

Advantages

• Customized to fit your requirement
• High quality components
• Reliable Performanance
• Skid mounted , easy installation
• Easy operation and servicing
• High level of plant automation
• Online product water quality monitoring
• Membrane and pump protection features
• Material of construction: PVC/SS/MSRL
• Quick availability & Fast delivery

Other Information

• Delivery Time: 15-20 days

Reverse Osmosis / RO is a process to remove dissolved solids and impurities from water using a semi-permeable RO membrane which allows the passage of water but leaves the mass of dissolved solids and other contaminants in reject water. The RO membranes require water to be under high pressure (greater than osmotic pressure) to pass water. The water that passes through the RO membrane is called to as the "permeate (Product)" and the dissolved salts that are rejected by the RO membrane is called to as the " Reject (concentrate)". A properly run RO system can remove up to 99.5% of incoming dissolved salts and impurities.

Arise considers your inlet water quality and capacity requirements and offers you best option combination. This option is dependent on different flux rates, pump selection, type of membrane and raw water quality. We gives the right solutions, cost effective running cost and optimized capital costs.

Advantages

• Customized to fit your requirement
• High quality components
• Reliable Performanance
• Skid mounted , easy installation
• Compact and modular RO blocks
• Easy operation and servicing
• Specific selection possible from a wide range
• High level of plant automation
• Stainless steel multistage centrifugal pump; inline suction and delivery allows easy maintenance and access
• Online product water quality monitoring
• Membrane and pump protection features
• lowest pipe length to reduce plant resistance
• Material of construction: PVC/SS/MSRL
• Quick availability & Fast delivery.

SS RO Industrial Plant Features:

Long operational lifeExcellent coolingHigh operational fluencyUnmatched performance

Some of the filter processes, we use are:

• Raw water pump
• Pressure Sand Filter
• Activated Carbon Filter
• 20 micron cartridge filter
• 05 micron cartridge filter
• High pressure pump
• RO Elements
• 01 micron filter
• Product water storage tank/utility
• Skid: Stainless Steel/Metal Steel

Pet Bottle Rinsing, Filling & Capping Machine is based on automatic process that takes care of processes involving Pet Bottle Rinsing, Filling, Capping. Coming with label shrink tunnels, these are suitable for bottles.

FEATURES

• Fully automatic Monoblock operation for 200ml - 2000ml bottles.
• Can run PET bottles with air conveyor and Glass bottles with in-feed slat conveyor.
• Maximum production speed 30/60/90/120/150 bottles/min.
• Machine fully in S.S - 304 and all product contact parts in S.S - 316 quality.
• Machine can be made for hot fill products or cold fill carbonated drinks.
• UV sterilization for caps before capping operation.
• Fitted with PLC control.
• Elevator / Vibrator for automatic applying of caps.
• Optional: Batch coder, Shrink tunnel

Application:To be used in Rinsing Filling and Capping of Pet Bottles for Mineral Water.

We are the trusted manufacturers and exporters for providing a wide range of automatic Pouch Packaging Machines, which caters to the packing requirements of clients in the food industry. Our machines are durable and high performing that makes them cost effective in varied sense. We offer our products at reasonable prices.
We are one of the renowned organizations, manufacturing, supplying and exporting premium Automatic Pouch Packing Machine. With an aim to ensure high-value to our patrons, this application is made with core accuracy at our professionals' end. In order to attain international standards, our offered equipment is fabricated with quality raw materials obtained from authentic market vendors, at our end. The Automatic Pouch Packing Machine is used widely by variegated mills and factories for pouch packing solutions with low labor costs.

FEATURES

• Suitable for any type of powders like Detergent powder, Etc.
• Electro magnetic clutch-break system. Filling range set by timer.
• The machine is very much suitable to pack detergent powder, coffee powder, Skimmed Milk Powder, Spices, Flour, Baking Power, Curry Powder, Besan, Henna, Pharmaceutical . Powder, Talcum Powder etc.
• Manufactured to highest food grade standards to ensure complete sterility.
• Designed for fast and easy change over for container size and fill weights without additional change parts in many instances.
• Accuracy of the pouch length is maintained by clutch-break mechanism.
• Clutch-break combination mechanism designed specially for extra strength and maintenance free application.
• P.L.C (Pre Logic Control System) based total control system.

TECHNICAL SPECIFICATIONS

• FEEDING HEAD

Continues gravity flow filling system

• FILM WIDTH

325 mm

• FILLING ACCURACY

+/- 3 ml

• POUCH WIDTH

up to 150 mm

• POWER REQUIREMENT

Single phase, 230 V, AC 50 Hz

• MACHINE DIMENSIONS

1500 (H) x 800 (W) x 950 (Dept) mm

• PRODUCTION SPEED

3000 pouches / hour

• FILM THICKNESS

60 to 80 microns

• INNER CORE DIA. OF FILM ROLL

70 mm

• POUCH LENGTH

Up to 160 mm

• COOLING WATER REQUIREMENT

Not required

• NET WEIGHT

350 kgs (approx)

• MACHINE CONTROL SYSTEM

Electronic Timer System

• FILM MATERIAL

Co-Extruded Virgin films

• OUTER DIA. OF THE FILM ROLL

up to 350 mm

• POWER CONSUMPTION

1.2 kW / Hour

• POUCH COUNTER

Provided

• COATED

Powder Coated

• PACKING RANGE

100 to 500 ml

• SEALER HEATING SYSTEM

Continues Sealing system

• POUCH STYLE

Center sealed Pillow type

• PEAK POWER

3.5 kW

• DATE PRINTING DEVICE

Optional

Pet Bottle Rinsing, Filling & Capping Machine is based on automatic process that takes care of processes involving Pet Bottle Rinsing, Filling, Capping. Coming with label shrink tunnels, these are suitable for bottles.

We are engaged in offering a quality array of Cabinet Atta Maker to our esteemed patrons. These offered makers find excessive application in various industries and sectors. They are manufactured in compliance with international standards and norms. Offered products are fabricated using advanced technology and tools, which enables it to stand tall on the patrons requirements. High grade raw material are also used in the fabricating of these products that are sourced from the most authentic vendors of the market. Our range comprises Cabinet Atta Maker.We are instrumental in offering a wide array of Cabinet Atta Makers to our valued patrons. Our clients can avail these product in different settings and custom configurations in order to meet specific requirements. Offered atta makers find extensive application in churning and grinding of both dry and wet food material in commercial sectors. Moreover, they are manufactured using high grade raw material that are sourced from the most valued vendors of the industry.

Some features are:

1. Low maintenance
2. Longer service life
3. Sturdy construction
4. Excellent performance

Technical Specifications:-Motor1 HP Single PhaseGrinding Capacity / Hour8 to 10 kgMotor Rpm2800 RpmChamber Size6 inchStone Without Stone Hopper Capacity5 KgWeight (kgs. )50 Kg Body PlywoodWinding Copper Winding

Features:

• Easy automatic without gear/extra motor
• With automatic regulator function
• Attractive color with soft look
• Balanced rotor
• Stainless Steel hopper
• Powder coated matching hinges
• Steel hinges for drum
• Double wheel caster
• Manual release system
• Auto restart (Even after power failure)
• Excellent service after sale

1. We are one of the leading names engaged in manufacturing and supplying a high quality range of Mixer Model Atta Maker. These offered atta maker are manufactured using high grade raw material that is sourced from the most credible vendors of the industry. They are highly regarded in the market for easy & efficient performance, superior quality high tensile strength. This range can be availed in various sizes, grades and dimensions as per the patrons requirements and preferences. Offered range comprises Mixer Model Atta Maker and others.

   We are pioneers in offering a wide array of Mixer Model Atta Maker to our valued patrons. These offered mixer are manufactured in compliance with wheat germ and nano watt technology. Offered atta makers are manufactured using high grade raw material that are procured from the most credible vendors of the industry. Moreover, customers can avail these in various specifications as per their demands.

2. Some features are:

   1. High tensile strength
   2. Durability
   3. Robust construction
   4. Low maintenance

   Technical Specifications:-

   1. Motor :1 HP Single Phase
   2. Grinding Capacity / Hour :8 to 10kg
   3. Motor Rpm:960 Rpm
   4. Stone Grindwell
   5. Hopper Capacity :3 Kg
   6. Weight (kgs. ) :26 Kg
   7. Body Steel
   8. Winding : Copper Winding

An Induction Motor is an Ac electric motor in which the electric current in the rotor needed toproduce torque is obtained byelectromagnetic inductin from the magnatic field of the sator winding.

Application of induction motor

Singal Phase

1. Washing machine
2. Refrigerators
3. Blenders
4. juice mixers. etc

Three Phase

1. Pumps
2. Compressors
3. paper molls
4. Textils mills
5. leth machine etc
6. Low maintenance
7. Low maintenance

NOTE

1. All Dimension are in m. m.
2. 63 to Frame are without Eye Bolt.
3. Terminal box Position fir 63 to 132 Frame will be top side.
4. insulation class 'e'

RANGE OF MOTOR

1. Foot Mounted Motor : 3 Phase 0.25 H.P. to 10 H.P.
2. Foot Mounted Motor : 1 phase 0.25 H.P. to 3 H.P.
3. Flange Mounted Motor : 3phase 0.25 H, P. to 10 H.P.
4. Flange Mounted Motor : 1 phase 0.25H.P. to 3 H.P.

VOLTAG & FREQUENCY

The Motor are Designed For a Rated Voltage of 415 v For 3 Phase&230 v For 1 Phase and Frequency of 50 HZ.The Motors Give The Rated Output For a Fluctuation Of (a) 10% in Voltage and (b) 5% In Frequency of (c) any Combination of (a) and (b).

Backed by in depth industrial expertise, Arise Engineering designs and installs turnkey system of Mineral Water Plant by fabricating various machines and equipment. Further, plant designs are laid down by skilled professionals as per latest state of art infrastructure incorporating recent technologies. Additionally, these plants are compact and decent, taking less space and minimum maintenance for their operation. We offer our services at leading market prices.

Features:-

• Arise Engineering has proven Mineral Water Technology and complete manufacturing system
• High bacterial growth with low surface area, compact plant with high load of BOD.
• Produce Drinking water / Mineral water from an approved source, meet all the federal and state standards

A Range of System sizes are available to match your bottling needs