Chillers #72672

Legislation is in place to phase out chlorofluorocarbons (cfcs) and hydro-chlorofluorocarbons refrigerants due to their harmful effect on the earths ozone layer. This has led to the development of a new range of synthetic hydro-fluorocarbon refrigerants. The effect of these refrigerants on global warming, when released into the atmosphere is thousands of times greater than carbon dioxide. This has resulted in tighter legislations on the sale and usage of hfc refrigerants. The armec made chiller overcomes these environmental and long term availability concerns. Ammonia is naturally occurring refrigerant, with zero ozone depletion potential and zero global warming potential. The unit comes pre-charged and tested, to simplify site installation works and minimizing commissioning time. It is ideally suited for applications including chemical process cooling. There are many models of water cooled ammonia chiller with nominal capacities ranging from 20 tr to 500 tr based on cooling water at +5c alternative secondary fluids including glycol enable ammonia chiller to operate at fluid temperatures down to -10c to -40c without modification to the standard design.

We Design and Manufacture Ammonia based Packaged ChillersChilling Plants up to (-) 40 C, at our Factory situated at Changodar, Ahmedabad, which is one of the Developed Industrial Areas of Gujarat. The System is designed in accordance with latest National and International Standards. We offer range of Packaged ChillerChilling Plant with Water Cooled Type. Condenser, Hermetic, Semi Hermetic, Open Type Reciprocating, Screw etc. type compressors, Evaporators, Complete Control Panel, Expansion Valve, Electrical Panel with Complete Interlocking System and fault Indication. The Packaged Chillers are tested for more than 48 hours under our stringent quality control System. Physical inspection and performance run trial of Packaged Chillers, is always insisted to the Client before dispatch.

We manufacture and supply wide Ammonia based Screw Chillers, with Water Cooled with variety of (Low / Medium) temperature range up to (-) 40 Deg C.

We provide varied range and makes of Screw Compressors with Single and Twin Screw arrangements and with required fittings.

We Provide Screw Chillers with Environment Friendly and HFC Free Refrigerant Ammonia.

Selection of Excellent and first grade Raw material and fittings, and Experienced, Excellent and Quality workmanship is the key to guaranteeing Screw ChillerQuality.

Characteristics

• Full Product Range Suitable for Low Temperature and Medium Temperature Applications
• High Performance Compressors manufactured by specialized manufacturer like (JE HALL, BITZER, REFCOMP, FUSHENG, etc.), is adopted to ensure that the Chiller is Economical and durable.
• Precise Capacity Control 3 Steps/ 4 Steps or Continuous Step less Capacity Control System. Both the Capacity Control System consists of Modulation Slide Valve, piston rod, cylinder and piston rings.
• Advanced control algorithm is adopted to control chiller in advance and hence avoid frequent stoppage.
• High Efficiency, Energy Saving & Low Operating Cost.
• Wide Operating Range.
• Automatic PLC Control.
• Robust and Simplified Structure, high reliability.
• Top Level Efficiency, Energy Efficient Performance and Long Lasting Reliability.
• Maximum Accessibility and Total Connectivity.
• High Energy Efficiency

  Variation in the Load of the Plant, whether seasonal or Daily, mean that the Chiller functions mainly with partial loads. The high number of capacity Steps available, the capacity to supply a load that meets the needs of the Chiller with less power absorption and the optimization of performance with partial loads distinctive features of these chillers, allow attainment of the high level of EER energy efficiency.High Energy efficiency means more respect for the environment and more cost savings. Conforming to ASME, TEMA Standards.

We design and manufacture ammonia based packaged chillerschilling plants up to (-) 40 c, at our factory situated at changodar, ahmedabad, which is one of the developed industrial areas of gujarat. The system is designed in accordance with latest national and international standards. We offer range of packaged chillerchilling plant with water cooled type. Condenser, hermetic, semi hermetic, open type reciprocating, screw etc. Type compressors, evaporators, complete control panel, expansion valve, electrical panel with complete interlocking system and fault indication. The packaged chillers are tested for more than 48 hours under our stringent quality control system. Physical inspection and performance run trial of packaged chillers, is always insisted to the client before dispatch.

We manufacture and supply wide ammonia based screw chillers, with water cooled with variety of (low medium) temperature range up to (-) 40 deg c. We provide varied range and makes of screw compressors with single and twin screw arrangements and with required fittings. We provide screw chillers with environment friendly and hfc free refrigerant ammonia. Selection of excellent and first grade raw material and fittings, and experienced, excellent and quality workmanship is the key to guaranteeing screw chiller quality.

We offer Freon Scroll Chiller.ARMEC designs and manufacture High Efficiency Freon Based Scroll Chillers, with Deafness Copeland make Scroll Compressors. Chillers are offered with Air Cooled and Water Cooled Options. ARMEC Manufactures Scroll Chillers starting from 5TR Capacity up to 20TR Capacity with Single Compressor System, and then after we offer multiple Compressor System, as per requirement. Chillers are available with varied range of Refrigerants like Freon R 22, R 404a, R 407c, R 507, R 134a etc. Energy-efficient chillers to suit Indian conditions. Scroll Chillers design ensures that they operate efficiently even at high ambient temperatures that are frequently encountered in many parts of India Abroad. These chillers are not only easy to install and commission but also ideally suited for handling varying load applications due to their multiple compressor configuration.

It is the state of the art cooling technology for air blown film lines.The control of constant temperature and air flow parameters is providing finished product with stable properties under any environmental conditions.Bubble cooling: Bubble cooling is one of the major factors to consider during the extrusion process; the introduction of the internal bubble cooling system (IBC) and outer bubble cooling system (OBC) has allowed considerable progress by precise control of air temperature for cooling the external air ring.

Precise control of the air ring temperature ensures that the geometric shape of the bubble, the neck, the frost line position and the bubbles diameter is maintained.

AFD by supplying chilled air to the blown film extrusion line, grants a production increase up to 30%.AFD integrates the advantages being already part of the AFD system with a few technical pluses further increasing its performances and energy saving.

• With VFD which saves 30% energy than hot gas bypass system.
• Direct DX System.
• Fine accuracy of temperature, which can be adjustable at 1C
• Multiple compressor design with scroll technology.
• 100% independent refrigeration and controls.
• Controlled by Programmable Logical Controller(PLC)
• Including Pressure Transmitter which senses the perfect pressure of system.

Advantages of Air Chiller

• Lower air temperature
• Reduce the power cost.
• Precise temperature control ensures uniform air temperature throughout the process.
• Direct setting of air temperature.

Air Chillers Control The Temperature at Air Ring of 1C Which Provides The Following Advantages:

• Consistent, high quality film
• Negligible temperature tolerance.
• Low temperature cooling increases shine in blown film.
• Increased productivity by up to 20%
• It can maintain properties of blown film plants under any environmental conditions.
• The direct air cooling system by direct expansion of the gas grants saving up to 50%, if compared to the standard chiller + heat exchanger system and up to 30% compared to any hot gas by pass system.

We Design and Manufacture Ammonia based Packaged Chillers/Chilling Plants up to (-) 40 C, at our Factory situated at Changodar, Ahmedabad, which is one of the Developed Industrial Areas of Gujarat. The System is designed in accordance with latest National and International Standards.

We offer range of Packaged Chiller/Chilling Plant with Water Cooled Type.

Condenser, Hermetic, Semi Hermetic, Open Type Reciprocating, Screw etc. type compressors, Evaporators, Complete Control Panel, Expansion Valve, Electrical Panel with Complete Interlocking System and fault Indication. The Packaged Chillers are tested for more than 48 hours under our stringent quality control System. Physical inspection and performance run trial of Packaged Chillers, is always insisted to the Client before dispatch.

Technical Description

• Optimum Operating Parameters

  With ARMEC Chillers Capacities, Temperature, Refrigerant and the choice of ancillaries can be tailored to individual requirements.

• Variable Packaged Contents

  Dependent of customer wishes the Packaged can include components say for example the Compressor, Drive Motors, Pumps, Panels etc.

• Compact Package

  ARMEC Packages are delivered complete with internal piping, instrumentation, writing and ready for connection to the customer system immediately on arrival at site.

• Simple Operating System

  All Operation and maintenance elements are accessible from one side for easy operation and maintenance.

• On Site Utilities

  ARMEC Packages does not require any site and are Ready to use type.

ARMEC designs and manufacture High Efficiency Freon Based Scroll Chillers, with Deafness / Copeland make Scroll Compressors.

Chillers are offered with Air Cooled and Water Cooled Options.

ARMEC Manufactures Scroll Chillers starting from 5TR Capacity up to 20TR Capacity with Single Compressor System, and then after we offer multiple Compressor System, as per requirement. Chillers are available with varied range of Refrigerants like Freon R 22, R 404a, R 407c, R 507, R 134a etc.

Energy-efficient chillers to suit Indian conditions.

Scroll Chillers design ensures that they operate efficiently even at high ambient temperatures that are frequently encountered in many parts of India / Abroad. These chillers are not only easy to install and commission but also ideally suited for handling varying load applications due to their multiple compressor configuration.

Features

• Reliable and highly energy-efficient scroll compressors
• Mega power savings with tandem scroll models
• Tropicalised design for high ambient temperatures up to 52 C
• Auto distribution of load for efficient running of the chiller
• Capacity modulation ensures that only required number of compressors operate to handle the load, thus saving power
• Lower electrical infrastructure cost
• Quiet operation