We, ARS Engineering Private Limited, introduce ourselves as an engineering Company providing compressed air solutions to our valued customers for more than 1.5 decades, by offering pre and after sales services and energy conservation audits. With extensive efforts by our Research team, recently, we came up with an  IMPORT SUBSTITUTE Innovative and energy saving Product  viz. ARS-Z series Electronic level sensed Condensate Drains which has got following salient features: Made In India Rapid pay- back period. Effective condensate drain Long Life Compact in design, Robust aluminum body. LCD display showing drain counts, an unique feature first in its class against others having only LED Indications. Now-a-days, everybody is cost conscious and uses quality product. By using ARS-Z series condensate drains, both the purposes are served by saving cost of compressed air. Our products have an edge over the competition and hence we are receiving overwhelming response in Indian market and also overseas customers in Middle East and Canada. WHY CONDENSATE DRAINS ARE NEEDED All atmospheric air contains some water vapor, which will begin to condense into liquid water in the compressed air or gas system when the air or gas cools past the saturation point, i.e., the point where it can hold no more water vapor Condensate drains are possibly the least glamorous and most ignored component of a compressed air system but nevertheless, a most important part. Contaminants can enter a system at the compressor intake or be introduced into the airstream by the system itself Lubricant, metal particles, rust, and pipe scale are all separated and filtered out, but it’s the drains that have to operate properly for the filters and separators to be successful in completing their task.

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, expensive instruments, etc which results in the downtime of whole system. Our Air Dryers remove the moisture to a level of 600 ppm(w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, vaporator and moisture separator) are integrated into one single unit. Features: Eco friendly refrigerant in all range of refrigeration air dryers Latest technology energy efficient heat exchangers in all models of refrigeration air dryers Very low pressure drop is a significant advantage. Refrigeration Air Dryers occupy less floor space Remote interfacing and monitoring in selected models of refrigeration air dryers Refrigeration Air Dryers provide outlet air quality according to ISO 8573-1, Table 3, Class 4 Operating Range: Refrigeration Air Dryer Capacity: 20 to 50000 m³/hr Inlet air pressure of refrigeration air dryer: 1.5 to 300 bar g Inlet air temperature of Refrigeration Air Dryer: 10 to 60°C Pressure Dew point temperature of refrigeration air dryer: +3°C Applications: Plant Air Power Plant Instrumentation & Ash conveying Steel Plant Cement Industries Food & processing Textiles Pet bottling Glass blowing Leather Industry Sugar Industry Paper mill

We, ARS Engineering Pvt. Ltd., are providing our valued clients with the best  Air Receiver Tank.  Developed with high-grade basic material, these tanks are in compliance with the defined parameters of the industry. We offer these tanks in the option of  vertical and horizontal design.  The air receivers are fitted with pressure gauge, safety valve and manual drain valve. Our product-range holds several attributes such as longer service life, resistance against corrosion, excellent performance and high compressive strength. We offer this gamut in different sizes and specifications so as to meet divergent demands of the clients. Furthermore; we hold specialization in providing equipments to meet the necessary specifications of clients. Features: Longer serviceability Excellent performance Smooth finish Robust construction Capacity Range: 0.5 M3 to 5.0 M3 50 Ltr to 500 Ltrs

MLC Pipes has been specially designed for the creation of primary and secondary network for compressed air. To meet current need of the Industries. Multi Layer Composite pipes are been produced with latest German Technology as its state of the art. They technology helps us to reduce numerous bends & fittings unnecessary. The aluminium thickness of pipes has been selected to meet compressive and flexural strength requirement. Technical Details: MOC: Polyethylene-Aluminum-Polyethylene  (PE-AL-PE)  Integrated.  Multi-Layer Pipes Colour Code: Air –  Blue Joint:  100%  Leak Proof. Bendable hence less joints Energy Efficiency:  30%  more flow rate than MS & GI Corrosion resistant: Rust Free, Hygienic  100%, Toxic Free,  Scale Resistant Working Temp: Range - 20°C TO 85°C PEX Quality: No Oxygen Permeability, Low Thermal Conductivity Resistant: Chemicals, Fire,   No growth of micro Organisms Joint: Non Wedging  100%  Leak Proof.

Heat transfer equipment may be designated by type or by the function it performs, such as chiller, condenser, cooler, heater, vaporizer, and so on. The choice of shell-and-tube heat exchanger type is governed mainly by factors such as provision for differential movement between shell and tubes, design pressure, design temperature, and fouling nature of the fluids, rather than the function. Hot compressed air is cooled to safe and usable temperatures for smooth working of instruments and pneumatic tools. We design and supply customized vertical as well as horizontal Heat Exchangers to meet the exact demand of our valued customers, ranging from 20 CFM to 1000 CFM and pressure range from 2.0 Kg/cm2g onwards.

Compressors and its accessories are capital equipment. Customers do not afford to have down time of such vital equipment and hence to keep the equipment in healthy condition and to get the desired output of uninterrupted supply of compressed air, use of genuine spare parts is a must. Most of these original  genuine spare parts are available off the shelf for air/gas compressors and products manufactured & supplied by us.

KPCL Reciprocating, Horizontal Balanced Opposed, Piston Compressors is the result of extensive engineering expertise and experience of over five decades in design, manufacturing, supply and installation of air & gas compressors of various designs, capacities and pressures for a wide range of applications. These units cover a wide capacity range from 3 m³ / min to 176 m³ / min & pressure range from 1 Kg / cm²g to 400 Kg / cm²g. Compressors up to 6 stage with pressure range up to 400 Kg/cm2g, on a turnkey basis – from techno-commercial consultancy to commissioning on site. Sporting a modular design, these compressors conform to the latest versions of compressors standards, as per the requirement of the application. Till date, we have supplied more than 10, 000 compressors designed in-house. In 1999, we added the Crepple design compressors (Reciprocating, Balance opposed Piston, water cooled Compressors) to our portfolio. The BOP compressors have minimum power consumption, lower operating temperature & maximum efficiency thus achieving overall economy. Features: Automatic loading and unloading facility. Force Feed Lubrication System to ensure smooth lubrication of all moving parts. Automatic, well placed cushioned valves, transparent covers and ample space, ensuring ease of inspection and maintenance. Minimum foundation, low wear & tear of moving parts. No horizontal or vertical imbalanced forces ensuring vibration free operation. Common parts for different models offer flexibility of opting for one or more models, without increasing spares inventory. Operational Economy. Types of Gases handled KPCL manufactured and supplied reciprocating compressors and booster compressors handling variety of gases like: Bone dry Nitrogen, wet Carbon dioxide, Recycled gas, Natural gas, Mixture of gases (CO2, N2 and H2), Vinyl Chloride monomer gas, Biogas, LPG, Argon, Crude gas, Sour gas, Dry cracked ammonia, and a host of other industrial gases. Applications Instrument Air: Light & Heavy Engg, Chemical & Petro-chemical, Food Industry, Paper & Pulp, Fertilizer, Sugar, Textile, Iron & Steel, Cement, Copper & Zinc, Power Plants, Oil & gas, Pharmaceuticals, Refinery etc. Service Air: Mining, Construction and Civil Engineering, Light & Heavy Engineering, Chemical & Petro Chemical, Paper & Pulp, Shipyard & Port Trusts. Rubber, Glass, Textile, Iron & Steel, Automobile, Cement, Power Plants, Defence, Railways etc. Process Air: Chemical & Petro-chemical, Breweries, Mines, Paper & Pulp, Fertilizer, Sugar, Refinery, Oil & Gas, etc.

MLC Pipes has been specially designed for the creation of primary and secondary network for compressed air. To meet current need of the Industries. Multi Layer Composite pipes are been produced with latest German Technology as its state of the art. They technology helps us to reduce numerous bends & fittings unnecessary. The aluminium thickness of pipes has been selected to meet compressive and flexural strength requirement. Technical Details: MOC: Polyethylene-Aluminum-Polyethylene  (PE-AL-PE)  Integrated.  Multi-Layer Pipes Colour Code: Air –  Blue Joint:  100%  Leak Proof. Bendable hence less joints Energy Efficiency:  30%  more flow rate than MS & GI Corrosion resistant: Rust Free, Hygienic  100%, Toxic Free,  Scale Resistant Working Temp: Range - 20°C TO 85°C PEX Quality: No Oxygen Permeability, Low Thermal Conductivity Resistant: Chemicals, Fire,   No growth of micro Organisms Joint: Non Wedging  100%  Leak Proof.

Tank Mounted package Reciprocating Air compressors Almost all Industries are energy cautious, we ARS have a solution by providing energy efficient Tank mounted Reciprocating package air compressors. Features: Ready to Use No Foundation required Easy portability Easy for maintenance Operating Range: Capacity: 1 HP to 10 HP

We, ARS Engineering Pvt. Ltd., are providing our valued clients with the best  Air Receiver Tank.  Developed with high-grade basic material, these tanks are in compliance with the defined parameters of the industry. We offer these tanks in the option of  vertical and horizontal design.  The air receivers are fitted with pressure gauge, safety valve and manual drain valve. Our product-range holds several attributes such as longer service life, resistance against corrosion, excellent performance and high compressive strength. We offer this gamut in different sizes and specifications so as to meet divergent demands of the clients. Furthermore; we hold specialization in providing equipments to meet the necessary specifications of clients. Features: Longer serviceability Excellent performance Smooth finish Robust construction Capacity Range: 0.5 M3 to 5.0 M3 50 Ltr to 500 Ltrs

FAD Capacity: Range: 1.20 m³ / min to 5.00 m³ / min Pressure:1.0 Kg / cm²g to 9.00 Kg / cm²g Features: Skid Mounted, Self Contained Package Designed for 100% Oil Free Applications With Water Cooled and Air Cooled Heat Exchangers Accessories Air Receiver: Capable of handling high pressure air; tested leak proof design conforming to IS 2825. Available in both carbon steel and stainless steel versions. Air Dryer: Option for both Heatless and Refrigerated type dryer. These dryers are engineered to be highly efficient while incurring low running cost. Non Return Valve Highly efficient Plate Type NRV to avoid back pressure of air which is installed between the aftercooler and air receiver. Aftercooler With Moisture Separater Shell and Tube, Fixed tube bundle type horizontal aftercooler is provided with the machine that provides compressed air near to atmospheric temperature at delivery. Custom engineered coolers available as per client requirement. Modular Design The machines can be engineered as Gas Compressor, for gas applications or Vacuum Pumps. For further details of such customized solutions, please contact our Sales Representative. All packaged versions include compressor, motor, aftercooler, control panel suitably mounted on deck. Air Dryer and Receiver are optional supplies. Self contained packaged versions include, in addition to above, a close circuit water cooling system thus eliminating the need for an external water supply.

Compressors and its accessories are capital equipment. Customers do not afford to have down time of such vital equipment and hence to keep the equipment in healthy condition and to get the desired output of uninterrupted supply of compressed air, use of genuine spare parts is a must. Most of these original  genuine spare parts are available off the shelf for air/gas compressors and products manufactured & supplied by us.