Other Products / Services #665956

During the night and early morning, due to humidity, condensation takes place and small droplets called dew are formed. These dew drops are clear, transparent and reflect light brightly. The dew drop machine prints such beautiful dew drops on textiles. Dew drop effect is obtained using resin paste which can be used for printing on any kind of textile. On adding pigments to the paste colourful effect like dews can be obtained on the entire fabric.

Our Transfer Print is an independent and compact machine that is used to print, in a continuous working system, weaved and knitted fabrics as well as continuous filaments on warp beams using the transfer of colours based on temperature.

Versatile machine which can be used for low and high volume productionIt is very user friendlyMaximum deviation up to 1CLow energy consumptionNomex feltDigital microprocessor based Temperature ControllerVariable Speed controlCan be supplied for transfer printing on to cut panelsOil heated drum provides uniform heating over entire surface thereby, reducing power consumptionHigh penetration of ink provides consistency of colours throughout the fabric

During the night and early morning, due to humidity, condensation takes place and small droplets called dew are formed. These dew drops are clear, transparent and reflect light brightly. The dew drop machine prints such beautiful dew drops on textiles.

Dew drop effect is obtained using resin paste which can be used for printing on any kind of textile. On adding pigments to the paste colourful effect like dews can be obtained on the entire fabric.

Plastic Drop Print

The appearance of paste is milky white and later various coloured foil can be transferred to give the plain white specific colours. The colourful effect can also be obtained by adding pigments to the paste. Various droppings in different patterns can be obtained by using special rotary screens.

Binder coating to fabric leads to feeding pile after which the residual pile is collected in the pre drying phase with heat setting and brushing followed by inspection and packaging of the final product.

Kinds of Flocking Pile Fabrics

Flocking on fabrics can be done in two ways:

Either it can be done all over or it can be done in a required pattern on the fabric.

Models

# Design and specifications are subject to change without prior intimation.# Required size available on demand.

The foil transfer on the textile is done by the means of stamping process.

The foil stamping process takes place in various stages. In the first stage the adhesive is transferred to the textile through the Flat Bed screen or a Rotary Screen. The adhesive coated textile passes through the Foil Stamping Machine where in there is an unwinding device for textile and foil roll. These simultaneously pass through a hot stamping device after which, the foil is transferred to the Precoated textile.

In the next stage, the textile goes through the winding section where the foil and the textile are separated and individually wound.

Roll to roll foil stamping can be done in various shades and colours like gold, silver, multicolor and tone to tone. This stamping can be done in very minute and small designs also with a raised effect, if the stamping order is in large quantities. This type of foil stamping is very useful if followed through on a finished dyed or printed textile and if any additional effects are required.

This type of roll to roll foil stamping machine is used in garments where particular portions of the textiles like sarees, dress materials, furnishings etc. need to be highlighted by the foil.

In rotary screen coating, the patterns are normally dots and open or closed surface structures. The adjustment of weight is done by open areas and thickness of the screens.

• Suitable for low to high viscosity products
• Modification with additives
• Application as paste and stable, metastable or instable foam
• Wide selection of rotary screen patterns

The sparkler machine has glitters that are pieces of self adhesive coloured foil cut in various shapes and sizes.

Two fabrics run simultaneously and glitters are randomly showered through the hopper on the fabrics. Glitters pass through the thermal press unit, and are finely set on the fabrics.

This process is used for textiles like sarees, dress materials, garments, etc. Additionally if can be used for enhancing purses, presentations, jewellery cases, book covers, paper folders, decorative materials and pandal decoration etc.

The highly versatile Calendar is suitable for the transfer of dye sublimation inks from paper onto the fabric to be printed or fix the ink on directly printed fabrics.

Features

• Versatile machine which can be used for low and high volume production
• It is very user friendly
• Maximum deviation up to 1C
• Low energy consumption
• Nomex felt
• Digital microprocessor based Temperature Controller
• Variable Speed control
• Can be supplied for transfer printing on to cut panels
• Oil heated drum provides uniform heating over entire surface thereby, reducing power consumption
• High penetration of ink provides consistency of colours throughout the fabric

Uses

Upholstery, sportswear, furnishings, promotional items, fabrics etc.

We have outstanding in-house facilities in Gujarat(India) and thus, we deliver massive array of products. Clients can stay assured for the products that we offer, as they will remain damage free. For this, we make use of premium packaging material for wrapping them.