We are a renowned Supplier of LPG Gas Regulators. The LPG Gas Regulators supplied by us are known for their excellent function and durability. The LPG Gas Regulators provided by us have wider outer pressure ranges. The outlet pressure can be easily adjusted by rotating the adjustable screw. When rotated anticlockwise, the outlet pressure of the LPG Gas Regulators reduces and increases when rotated clockwise. About Gas Regulators :A pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe and/or usable pressures for various applications, i.e., Oxy-fuel welding and cutting, propane and LP Gas Applications, Oil and Gas Industry, Mining Industry, etc. Gas pressure regulators are used to regulate the gas pressure and are not appropriate for measuring flow rates. A Pressure regulator's primary function is to match the flow of gas through the regulator to the demand for Gas placed upon the system. If the load flow decreases, then the regulator flow must decrease also. If the load flow increases, then the regulator flow must increase in order to keep the controlled pressure from decreasing due to a shortage of gas in the pressure system. These regulators are available in two stages first called First stage Regulator & second stage Regulator. These regulators are available in two types the one is adjustable type & another is preset type. First Stage Regulator :The first stage of the regulator is mounted to the cylinder /Tank Pressure by a suitable means. It reduces cylinder pressure to middle or intermediate pressure, usually about 1 bar to 10 bars (15 psig to 150 psi) higher than the ambient pressure. These regulators are balanced type by Mean of diaphragm & spring mechanism. A balanced regulator first stage automatically keeps a constant pressure difference between the inter stage pressure and the ambient pressure even as the tank pressure drops with consumption. The balanced regulator design allows the first stage orifice to be as large as needed without incurring performance degradation as a result of changing tank / cylinder pressure. Second Stage Regulator :Second stage regulators are not used for decreasing medium pressure and it must be installed downstream of a first stage regulator for safe and proper operation. Any regulator seen installed next to a building is a second stage regulator. Second stage regulators work with propane/ LPG/ Gases at a pressure supplied by the first stage regulator (inlet pressure) and further decrease that to a pressure that can be used by appliances (outlet pressure). It should be kept in mind that second stage regulators are not designed to work with varying tank pressures. Second stage regulators are only designed to operate in combination with first stage regulators. One cannot work without the other.

These regulators have wider outlets pressure range. The outlet pressure can be easily adjusted by rotating the knob of spring adjusting screw. By rotating the knob anticlockwise the outlet pressure is reduced & by rotating it clockwise the outlet pressure is increased. R-2101 & R-2111 are mainly used for gas cutting or welding purpose.

Preset Pressure Regulators These regulators are having preset outlet pressure. However the outlet pressure can be slightly adjusted by rotating the spring adjusting screw. The Industrial Pressure Regulator R-4109 is available with 4 different types of preset outlet pressures. These are suitable for canteen, restaurants & small Industrial furnaces.

These regulators are used in pressure reducing system for Natural gas or LPG. They are used to reduce the natural gas pressure from 4 kg/cm2 to 75m bar before supplying it to the domestic feeder line. These regulators are having built in slam shut off valve and creep relief valve (safety relief valve). These regulators are available in two models R-4405 & R-4403 depending upon flow.

The regulators R-2402 and R-4108 are mainly used for Ammonia gas. The trim parts for these regulators are of stainless steel. R-4108 is a preset type regulator and is mainly used as second stage pressure regulator. R-2402 is an adjustable pressure regulator and is mainly used as a first stage pressure regulator.

Regulator R-2206 is available with specifications similar to that of R-2202 except inlet connections. The inlet connection for R-2206 is similar to that of Adaptor R-1703, so it can be directly mounted on LPG cylinder. Outlet Size : 3/8" BSPM

Zero Governors are used to supply gases at atmospheric pressure to the mixing chambers. These are mainly used for the furnaces in glass industry. They are very sensitive and precisely maintain the required outlet pressure.

These regulators are low pressure high flow rate pressure regulators. These are mainly used where the inlet pressure is varying in a wider range. These regulators are suitable for medium size to bigger size furnace. Apart from the regulators shown, we could also supply low pressure high flow regulators with specifications as per the end customer usage for Oxygen, Nitrogen, and air.

Adjustable Regulators For High Pressure & High Flowrates. Regulators R-2307 & R-2310 are mainly used in "Soft Drink Industries" for Carbon Di Oxide gas pressure reducing system. They are also used in steel industries for high pressure oxygen lancing purpose and for pressure reducing systems for high pressure Gas manifolds.

We are a renowned Supplier of LPG Gas Regulators. The LPG Gas Regulators supplied by us are known for their excellent function and durability. The LPG Gas Regulators provided by us have wider outer pressure ranges. The outlet pressure can be easily adjusted by rotating the adjustable screw. When rotated anticlockwise, the outlet pressure of the LPG Gas Regulators reduces and increases when rotated clockwise. About Gas Regulators :A pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe and/or usable pressures for various applications, i.e., Oxy-fuel welding and cutting, propane and LP Gas Applications, Oil and Gas Industry, Mining Industry, etc. Gas pressure regulators are used to regulate the gas pressure and are not appropriate for measuring flow rates. A Pressure regulator's primary function is to match the flow of gas through the regulator to the demand for Gas placed upon the system. If the load flow decreases, then the regulator flow must decrease also. If the load flow increases, then the regulator flow must increase in order to keep the controlled pressure from decreasing due to a shortage of gas in the pressure system. These regulators are available in two stages first called First stage Regulator & second stage Regulator. These regulators are available in two types the one is adjustable type & another is preset type. First Stage Regulator :The first stage of the regulator is mounted to the cylinder /Tank Pressure by a suitable means. It reduces cylinder pressure to middle or intermediate pressure, usually about 1 bar to 10 bars (15 psig to 150 psi) higher than the ambient pressure. These regulators are balanced type by Mean of diaphragm & spring mechanism. A balanced regulator first stage automatically keeps a constant pressure difference between the inter stage pressure and the ambient pressure even as the tank pressure drops with consumption. The balanced regulator design allows the first stage orifice to be as large as needed without incurring performance degradation as a result of changing tank / cylinder pressure. Second Stage Regulator :Second stage regulators are not used for decreasing medium pressure and it must be installed downstream of a first stage regulator for safe and proper operation. Any regulator seen installed next to a building is a second stage regulator. Second stage regulators work with propane/ LPG/ Gases at a pressure supplied by the first stage regulator (inlet pressure) and further decrease that to a pressure that can be used by appliances (outlet pressure). It should be kept in mind that second stage regulators are not designed to work with varying tank pressures. Second stage regulators are only designed to operate in combination with first stage regulators. One cannot work without the other.

These regulators have wider outlets pressure range. The outlet pressure can be easily adjusted by rotating the knob of spring adjusting screw. By rotating the knob anticlockwise the outlet pressure is reduced & by rotating it clockwise the outlet pressure is increased. R-2101 & R-2111 are mainly used for gas cutting or welding purpose.

Preset Pressure Regulators These regulators are having preset outlet pressure. However the outlet pressure can be slightly adjusted by rotating the spring adjusting screw. The Industrial Pressure Regulator R-4109 is available with 4 different types of preset outlet pressures. These are suitable for canteen, restaurants & small Industrial furnaces.

These regulators are used in pressure reducing system for Natural gas or LPG. They are used to reduce the natural gas pressure from 4 kg/cm2 to 75m bar before supplying it to the domestic feeder line. These regulators are having built in slam shut off valve and creep relief valve (safety relief valve). These regulators are available in two models R-4405 & R-4403 depending upon flow.

The regulators R-2402 and R-4108 are mainly used for Ammonia gas. The trim parts for these regulators are of stainless steel. R-4108 is a preset type regulator and is mainly used as second stage pressure regulator. R-2402 is an adjustable pressure regulator and is mainly used as a first stage pressure regulator.

Regulator R-2206 is available with specifications similar to that of R-2202 except inlet connections. The inlet connection for R-2206 is similar to that of Adaptor R-1703, so it can be directly mounted on LPG cylinder. Outlet Size : 3/8" BSPM

Zero Governors are used to supply gases at atmospheric pressure to the mixing chambers. These are mainly used for the furnaces in glass industry. They are very sensitive and precisely maintain the required outlet pressure.

These regulators are low pressure high flow rate pressure regulators. These are mainly used where the inlet pressure is varying in a wider range. These regulators are suitable for medium size to bigger size furnace. Apart from the regulators shown, we could also supply low pressure high flow regulators with specifications as per the end customer usage for Oxygen, Nitrogen, and air.

Adjustable Regulators For High Pressure & High Flowrates. Regulators R-2307 & R-2310 are mainly used in "Soft Drink Industries" for Carbon Di Oxide gas pressure reducing system. They are also used in steel industries for high pressure oxygen lancing purpose and for pressure reducing systems for high pressure Gas manifolds.