Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

AP

Aseem Power Tekneeks Pvt. Ltd.
location Navghar, Mumbai, Maharashtra

Write a Review
Call Now Call Now

Our Products

  1. Transformers 3 Products available
  2. UPS 2 Products available
  3. Electronic Choke 1 Products available
  4. Inverters 1 Products available
  5. Voltage Stabilizer 1 Products available
  6. Electric Ballasts 1 Products available

UPS

Our product range contains a wide range of on-line ups and Modular UPS

On-line UPS

On-line UPS

UPS system today has come a long way from the type it was introduced in 80s. Technological Developments have brought newer and better concepts in the field. The latest trend is that of PWM technology using IGBT.ASEEM-OORJAhas incorporated advanced technology in the field. Micro Controller is used to control the processes such as pure Sine Wave generation, Alarms and Indications, Shut Down characteristics and protections.

Starting from 1 KVA to 30KVA single phase output systems and 10KVA to 500KVA 3 phase output systems are available.

The after Sales Service is our strong feature. We believe that Good Service retains customers and that Customer Retained is Customer Gained.ASEEM-OORJAthe trusted brand of the an iso certified company in the field of UPS since 1990s. Unmatched performance, with latest technology gives you a superior edge against vagaries of power. Best known UPS for critical load application, ASEEM-OORJAIs also known for prompt after sales service

State of an art design

Wide input window
Latest IGBT Technology

Isolated O/P
Pure Sine wave O/P

User friendly Design
High MTBF

RS232 interface & SNMP Optional

TECHNOLOGY

SINE PWM WITH IGBT & LCD/LED DISPLAY

CAPACITIES

2 KVA TO 30 KVA WITH BUILT-IN ISOLATION

I

N

P

U

T

WINDOW

170VAC-270VAC (1PH), 300-460VAC (3PH)

DC BUS

48VDC TO 360VDC

EFFICIENCY

BETTER THAN 85% AC-IN-AC-OUT

INTERFACE

AUTO SHUT DOWN SOFTWARE. [SNMP INTERFACE OPTIONAL]

O

U

T

P

U

T

VOLTAGE

230VAC ± 1%, 50Hz ± 0·1% (CRYSTAL CONTROLLED)

OUTPUT P/F

0·8 LAGGING TO UNITY

TRANSIENT RESPONSE

O/P OVERSHOOT & UNDERSHOOT LESS THAN 5% @100% LOAD CHANGE.

DISTORTION

LESS THAN 2% FOR LINEAR LOAD & LESS THAN 5% FOR NON LINEAR LOAD

CREST FACTOR

4:1

WAVEFORM

PURE SINE WAVE

INVERTER EFFICIENCY

BETTER THAN 90%

GENSET COMPATIBILITY

COMPATIBLE TO GENSET OF ANY MAKE

PROTECTIONS

1. O/P OVERLOAD, 2. O/P SHORT CKT, 3. O/P OVER VOLTAGE, 4. BATTERY LOW

COOLING

FORCED AIR COOLING

INDICATIONS

1. MAINS/CHARGER ON, 2. INV ON, 3. SYSTEM OVERLOAD, 4. BATTERY LOW

WORKING CONDITIONS

0 TO 45°C, HUMIDITY 95%RH ( NON-CONDENSING)
View Complete Details
Ask Latest Price & Details
Modular UPS

Modular UPS
The Modular UPS systems have become a necessity in the industries with continuous process and Data centers. Where even a small unscheduled break is not affordable, a modular system is a must. However two models are made available in the modular type: Power + SA and Power + model.



1.The Power + Model is a true modular system with features like HOT SWAPPABLE MODULES AND BATTERIES. The systems are constructed using modules of 10KVA or 25KVA as the case may be. Each module is an Online UPS in its complete sense. Each module can work as a Stand Alone UPS system. When stacked upon each other; they add up to make a Higher Capacity System with complete redundancy. These systems can be designed to reach up to 500KVA.

2.The Power+ SA Model is also made up of modules of 10KVA each. However they are not Hot Swappable and a shut-down is required for replacing the module. These systems are available up to 80KVA.

 Topology
  Construction		   True Online, Double Conversion
  Modular Parallel Hot-Plugged Module, Continuous Operation
  INPUT  
  Voltage
  Voltage Range
  Current
  Frequency
  Power Factor
  THDI		   3 X 400V + N
  -20% and + 15%
  15A per for a single module, no inrush current at startup
  47 - 63 Hz
  0.99
  5%
  OUTPUT  
  Rated Power
  Frequency Tracking Range
  Frequency (in free-running mode)
  Slew Rate
  Voltage
  Static Regulation
  Regulation for Unbalanced Load
  Dynamic Response to 100% Load Step
  Overload
  Waveform
  THD
  Load Creast Factor
  AC-AC Efficiency (nominal)
  DC-AC Efficiency (nominal)		   10KVA / 8 KW to 100KVA / 80kW
  ±1, ±2, ±3Hz (selectable)
  50/60Hz ±0.1%
  1Hz/sec.
  3 x 400 + N
  ±1%
  1% for 100% Unbalance load
  ±2%
  110% for 10 min.; 125% for 60 sec.; 1000% for 1 cycle
  Sinusoidal
  Less than 2% for linear load
  3:1
  Up to 96%
  Up to 98%
  BATTERIES  
  DC-Link Voltage
  No. of Batteries		   ±340 to 425V
  64 X 12V
  GENERAL  
  Maximum Power dissipation (Po=8kw)
  Ambient Temperature
  Relative Humidity
  Altitude
  Enclosure
  Cooling		   333W (1136 BTU) for a single module
  -100C to +400C (operating) - 200C to + 600C (storage)
  95% max non-condensing
  1500m w/o derating
  IP20
  Forced - Multi - Fan with speed control
  STANDARDS  
  EMC emission
  EMC Immunity
  Safety
  Design
  Low Magnetic Field Radiation		   EN50091-2 Class A; IEC 62040-2
  EN50082-2
  E50091-1; IEC 62040-1-1
  EN50091-3; IEC 62040-3
  EMF as per ICNIRP
  DIMENSION  
  10KVA Module (H X W X D)
  Weight		   88MM (2U) X 483MM (19") X 455MM
  9Kg
POWER+ System (including STSW and STSW + Base modules)
Model 10KVA 20KVA 30KVA 40KVA 50KVA 60KVA 70KVA 80KVA 90KVA 100KVA
Dimensions (mm) H 710 800 900 990 1080 1180 1270 1360 1460 1550
W 598
D 673
Weight (Kg) 84 99 114 129 144 159 174 189 204 219
ACOUSTIC NOISE (@1.5m from front of unit)
Noise (dBA) Half load 48 52 53 54 55 55.8 56.4 57 57.5 58
Noise (dBA) Full load 51 54 55 57 58 58.8 59.4 60 60.5 61




























































View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.