Product / Services
Post Buy Requirement
Asharam Engineering & Firestop Systems (p) Ltd.
Asharam Engineering & Firestop Systems (p) Ltd.
Raigarh, Chhattisgarh, India
Add Review
Call Now

Our Products

  1. Epoxy Coatings 5 Products available
  2. Others 16 Products available

Epoxy Coatings #1392698

Fireproof Coatings for Cables

Fireproof Coatings For Cables
We offer high quality Fireproof Coatings for Cables in the markets. The electrical cables are insulated with Polyvinyl Chloride, which enables fast spread of fire. During intense fire, the cable with PVC coating gives off toxic fumes combustion and corrosive gases, like Hydrogen Chloride gas and hydrochloric acid. The Indian Standard has recommended a certain code of safety IS 12459 Of 1988, which requires the cables to be compartmentalized by sealing walls floor openings openings under control panels and creating compartments along the cable galleries by using suitable fire resistant compound such as Fireproof Coatings for Cables. The Fireproof Coatings for Cables are a water-based Fire Resistant Compound for coating on electric cables to endure fire and to avoid the spread along horizontal and vertical cable racks under severe fire conditions. Features
  • The Fireproof Coatings for Cables can prevent the spread of fire along horizontal and vertical cable racks for a time period exceeding 3 hours.
  • The Fireproof Coatings for Cables prevents short-circuit in cables and keeps them operational for 20 minutes.
  • The Fireproof Coatings for Cables will not affect the cables load carrying capacity.
  • The coating is mechanically tough.
  • The Fireproof Coatings for Cables are manufactured using non-hygroscopic compound which is water, acid and alkali resistant.
  • Our cable coating is based on the based on the following basic recommendations as per IS: 12459 of 1998.
  • Has flexibility to sustain normal vibration in service.
  • Does not affect the current carrying capacity of cables i.e. does not de-rate cables.
  • Compatible with all types of cables jacketing materials and shall not crack due to bending of cables.
  • Non-toxic, non-irritant has high limiting oxygen index.
  • Touch dry in 12 hrs. (25 oC .60% RH) & fully dry in 48 hrs (25oC 60% H)
    • Standards With Which The Product Lies In Accordance With
      • IS - 10810 Part-53
      • IS:101
      • IEEE:383
      • IEC:332-1
      • ASTM-D-2863
        • Additional Features
          • Odourless Ph value : 7.6
          • Solid contents : 70%
          • Store in Shade (5 - 30 deg. Cent)
          • Thinner & Cable cleaning : Water Thick flowing liquid appx. 30, 000 mega pascal
          • Fire resistance : passes the test as per IEEE - 383
          • Coverage : 3 ltr. (per sq. mtr. for 2 mm dry film thickness)
          • Fire Rating : meets the requirement of a limited period of 20 to 50 minutes as per IEC - 331.
          • (depending upon thickness of coating)
            • Recommendations for Use of Firestop
              • General The concept of fire protection of cables is based on the following basic recommendations as per IS 12459 of 1988.
                • Preventing Delaying fire damage to the cables to preserve their functioning and increasing their resistance to fire heat.
                • Preventing Retarding the flame propagation through cables runs.
                • Segregating cable runs into compartments with a view to localizing the fire.
                  • Cable Coating
                    • Cable under Control Panels : Cable to length of app. 1.5 2 mtrs, should be coated with Firestop . This will effectively prevent flame propagation between the panel and the other areas, thus providing protection to the panel from fire Hazards.
                    • Cable affected by coal and deposition : This is highly hazardous area. Entire length of the cable, particularly heavy bunches of the cables should be coated with FIRESTOP. If the coal dust catches fire FIRESTOP will prevent any damage to the cable for a considerable period.
                    • Cable in high temperature areas : It is recommended that the cables near Boilers where the temperature constantly remains above 50 deg; C.and are prone to Flame Licking, should be coated entirely with FIRESTOP.
                    • Cable Joints : The area of approximately 1 Mtr. On both the sides of the joint and the joint itself should be coated with FIRESTOP to prevent the propagation of fire and damage to adjoining cable.
                    • Cable Galleries: Cables should be coated with FIRESTOP on the periphery of the bunch of cables. The compartments should be created by coating app. 1.5 Mt. At a length of app. 10 20 Mrs.
                    • Battery Room Area: Cables coated with FIRESTOP will be protected both from fire and chemical action of the battery fluid.
                    • Cable Crossing : Where cables cross each other in the cable gallery, the area should be protected by applying FIRESTOP at a length exceeding 1.5 Mrs.
                    • Oil Lubricant Spillage: The entire length of cable likely to be affected by fire Lubricant Spillage should be coated with FIRESTOP. The fire affecting the fuel will normally burn out while FIRESTOP will provide protection to the cables for a considerable time.
                        • Technical Data Sheet Name of the Product AK 312 AK 315DescriptionsWater Based, fire Resistant compound . Water Based, fire Resistant compound .Color WhiteBlack Viscosity Thick flowing Liquid app. 30, 000 Mega Pascal Thick flowing Liquid app. 30, 000 Mega Pascal Specific Gravity 1.11.1ph value 7.67.6Solid contents 70.00%70.00%Odour Odourless Odourless Limiting Oxyzen Index Over 70Over 70Storage Temperature Store in shade ( 5 30 o Celsius ) Store in shade ( 5 30 o Celsius ) Shelf Life One year at room temperatureOne year at room temperatureRecommended D. F. T. 2 mm-Minimum Packing 20 kgs -Fire Resistance as per IEEE-383 Passes the test.Stops the fire completely when used with cable fire barrier.Coverage 3 kg per Sq. Mt. For 2 mm Dry film thickness Not defined Cleaning of Surface & Thinner Water WaterDrying Time Touch Dry 2 Hours and Hard Dry 24 hours and complete curing 7 days (at 25 o C 65% RH)Touch Dry 2 Hours and Hard Dry 24 hours and complete curing 7 days (at 25 C 65% RH)Fire Survival IEC-331 Meets the requirement for the limited period of 20 minutes -
View Complete Details
Ask Latest Price & Details
Fireproof Coatings for Metal

Fireproof Coatings For Metal
We bring forth high quality Fireproof Coatings for Metal dealers. If fire breaks out in a metal structure, it can lead to melting or several other damages. For this purpose, we offer high quality Fireproof Coatings for Metal. The coatings are basically an intumescent coating, which acts as a normal paint and appears as a slightly rough finished paint. But when the temperature rises above 240 deg centigrade, the intumescent property gets activated and coating gets swelled and the surface inside gets protected from the heat, fire, smoke, radiation, etc. and in the same way chances of expansion, melting, etc. can be prevented.

Technical Specifications

TypePolymer based fire resistant water proof Intumescent mastic
ViscosityThick flowing liquid appx. 30.000 mega pascal
Specific Gravity 1.4
Ph value7.6
Solid contents 75%
OdourSlight odour of Aromatic Solvents
Storage Temperature Store in shade (5-30oC)
Recommended D.F.T. 3 MM
Minimum Packing 20 kgs
Coverage 5 kg / Sq. Mtr.for 3 mm dry film thickness
Cleaning of surface & Thinner AK-579

Metalkot – Coatings For The Metals AK-516

Name of the product Aroma Fire Resistant Epoxy Primer AK - 516
Type A two pack, air drying, polyamide cured, Zinc rich Brominated epoxy PRIMER
Method of Application Spray / Brush
Recommended Thinner
Brushing
Spraying
Nil
2 to 4%
Mixing Ration Base 3 and Harder 1
Maturation Time 30 minutes
Pot life 6hours at 30oC
Utilization Time 5hours at 30oC
Drying Time
Hard Dry 		Surface Dry 30 minutes
24 Hours
Over coating period Not before 18 hours and not after 48 hours
Finish Smooth and Glossy
Smooth and Glossy Smooth and Glossy
Dry Film Thickness / coat 75microns - recommended
Covering Capacity ( Theoretical)4.5 Sq mtrs per litre to achieve 75 micron thickness
Recommended Thinners AK - 579
Shades Offered Red Oxide
Standard Packing 1, 4 & 20 ltrs.
Compatible Finishing Paint Aroma Brominated Epoxy top coat AK-537
Recommended Uses Excellent for marine application. Protection of structure, storage tanks in refineries and coastal areas where fire & corrosion protection is needed..






View Complete Details
Ask Latest Price & Details
Fireproof Coatings for Wood Wall

Fireproof Coatings For Wood Wall
In several dangerous areas of an industry, each and every corner has to be monitored with utmost care. Due to this reason, we offer our special product of Fireproof Coatings for Wood Wall, which are effective for wooden surfaces, walls, concrete, etc. The Fireproof Coatings for Wood Wall, which we offer, are formulated from high quality material. The Fireproof Coatings for Wood Wall is provided to the clients at market leading prices. The Fireproof Coatings for Wood Wall is known to handle any fire break, which provides a rating of minimum 2 hours, even in temperature of 1263o C. The Fireproof Coatings for Wood Wall, which we deal in, are used and accepted by specialized Consultants in India.

Details

Description Water Based Fire Resistant Top Coat
Color White / Off White
Specific Gravity .6
Film thickness 0.2 mm
Toxicity Nil
Touch Dry 2 hours
Hard Dry8 hours
StorageStore in Shade (5 - 309 C)
Packing1, 4, 20 liters
Fire Resistance Meets the requirements of BS - 476 part 6 & 7, IS - 163, ASTM - 1360
Water ResistanceNo effect (40 9C 7 days)
Acid ResistanceNo Effect (5% HCL)
Alkali ResistanceNo effect (5% Naoh)
Termite Resistance1 coat of AK -405 & 2 coats of AK -414 on termite affected areas, kills all termites. No need to use solignum paint
Application Areas Can be applied on doors, walls, paneling, windows, false ceilings, fibre boards, etc.
Coverage Soft Wood - 3 sq. mtr/ ltr., Plywood - 3.5 sq. mtr / ltr Teak Wood - 4 sq. mtr/ltr., Fibre Board - 6 dq. Mtr/ ltr.
View Complete Details
Ask Latest Price & Details
Fireproof Coatings for Electric Room Panel

Fireproof Coatings For Electric Room Panel
Fireproof Coatings for Electric Room Panel is one of our efficient Passive Fire Fighting Products, which helps in preventing the spread of fire through cablescable openings in a surface, which can be wallfloor opening below panels. The system is approved universally for application in all the existing units and utilities. Components
  • Cavity fill (Protecflame) : 100-200 mm thick (as per clients needs) to provide 4 hours fire rating.
  • Non-comestible board : (encasing panel) on both sides or one side (as per clients needs) to protect in-fill panel from tamperingindustrial accidentsroadents, etc. And also to provide mechanical strength.
  • Sealant (Flameseal) : To fill-in the gaps around the cables for complete stoppage of firesmoke.
  • Anchors : Provided fasteners to fix the system in wallfloor opening.
    • Salient Features
      • The system comes with an inbuilt fire rating of 4 Hrs, as per the national and international standards such as ASTM W-814, ASTM E-119, UL:1479, BS-476 part-20 21, IS:3809, IS:1245812459
      • Economically priced
      • Low maintenance
      • Avoids the occurrence of big fire accidents by limiting more than 90% fire breaks
      • Enables much spare time to rescue team or equipment to control big fire breaks
      • It has the ability to turn all the good conductors of fire as wallfloor openings, PVCRubber cables, etc. into bad conductors.
      • If not damaged (by fire break, mechanical damage, renovation, etc.) lasts very long
      • Extends the life of cable
View Complete Details
Ask Latest Price & Details

Fireproof Coatings For Fabric

National Building code part IV, para 11.6.1 defines: For assembly buildings, all fabrics and stage settings made of combustible materials should be treated with flame proofing materials. We are reliable providers of Fireproof Coatings for Fabric, which enables the fabric to become flame resistant. The flame-proofed fabric, when comes in contact with fire will only char, and not spread flame. The Fireproof Coatings for Fabric comes at discounted price.In case of non-durable treatment, the flame proofing treatment has to be repeated after every instance of water wash.

Technical Specifications Of AK – 201

UsageMakes cotton & non synthetic fabrics like curtains, furnishing cloth, carpets, grey canvas, cardboard, paper & similar materials.
Specific Gravity 1.10
Thiningwith water (refer to applicatio)
Consumption Furnishing fabrics : 3 to 7 sq, mtr/ltr, Grey Canvas : 2 to 4 sq. mtr/ltr (Depending upon the fabric)
ApplicationDip or spray the material that has to be treated must be soaked and squeezed in such a manner that after drying, the weight of the material increases by about 15% to 18%. Ordinarily this can be achived by dipping or spraying on the material till fully wet as required for the duration of 2 to 10 minutes. Grey canvas should be soaked for 1 hour to 24 hours depending upon its weight.
Packing20 kg.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.