Our Products
We have developed "KARAM" High Precision Horizontal FLOOR TYPE BORING MACHINE which is most suitable for very heavy & High Volume Jobs which can't be accommodated on the work table of conventional Horizontal Boring Machine.
Main Dimensions & Capacities : | ||||
Table Top – * Square | mm | 1000 x 1000 | 1500 x 1500 | 2000 x 2000 |
Number of T-Slots | nos. | 5 | 6 | 7 |
Size of T – Slots | mm | 19 | 19 | 19 |
Load Carry Capacity | Kgs. | 4000 | 6000 | 10000 |
Total Height, incl. Rotary Table | mm | 750 | 750 | 800 |
Number of Guideways | nos. | 2 | 2 | 3 |
Traverse : | ||||
*Sliding movement of Work Table | mm | 1000 | 1200 | 1500 |
Drive Data : | ||||
Electric Motor | H.P. | 3 | 5 | 7.5 |
A.C. Drive | H.P. | 3 | 5 | 7.5 |
Linear Feed Rate with A.C. Drive | mm/min | 50 to 500 | 50 to 500 | 50 to 500 |
Rotary Movement for Positioning | With Power Feed | Yes | Yes | Yes |
Accuracy : | ||||
Positioning Accuracy | With D.R.O. | +/- 1 Minute | +/- 1 Minute | +/- 1 Minute |
Positioning Accuracy Linear Axis | mm | 0.02 | 0.02 | 0.02 |
1. The machine is complete with Full Electricals & duly equipped with Panel Board & Pendent Control Switch Board for the centralized control.
2. Gear Box for Auto-Feed Ram Head both Vertical & Horizontal is provided.
3. Alloy Steel duly hardened Gears are used.
4. Phosphorus Bronze Nuts are used for Lead Screws
5. 2.5mm Thick Turcite-B Lining is used on RAM/SADDLE.
6. Forced Lubrication with a Motorized Lubrication Pump is provided for the main Rotary Table. Independent Lubrication Pumps are provided for the Ram/Saddle & Cross Rail.
7. Precision Bearings and GUNMETAL guideways combination in the Bed/Table is provided to withstand Radial & Vertical Loads.
UNIT | VTL-1 | VTL-1.2 | VTL-1.5 | VTL-2 | VTL-2.5 | VTL-3 |
Table Diameter | mm | 1000 | 1200 | 1500 | 2000 |
2500 |
3000 | |
Max. Turning Dia | mm | 1200 | 1350 | 1750 | 2250 | 2750 | 3250 | |
Working Height Under Cross Rail | mm | 700 | 1000 | 1200 | 1500 | 1700 | 2000 | |
Ram Heads on Cross Rail | No. | One | One | One | One | One | One | |
Vertical Travel of Ram Head | mm | 450 | 550 | 650 | 750 | 800 | 900 | |
Swivel Angle of Ram Head | Deg. | +/-35 | +/-35 | +/-35 | +/-35 | +/-35 | +/-35 | |
Table Speeds | No. | 6 | 6 | 6 | 6 |
6 |
6 | |
Range of Table Speeds | RPM | 9 to 90 | 9 to 90 | 9 to 90 | 5 to 50 | 3 to 30 | 3 to 30 | |
Feeds for Horizontal & Vertical Travels | No. | 6 | 6 | 6 | 6 | 6 | 6 | |
Range of Feeds, Horizontal & Vertical | mm/min | 1.5 to 9 | 1.5 to 9 | 1.5 to 9 | 1.5 to 9 | 0.5 to 5 | 0.5 to 5 | |
Main Motor Drive | H.P. | 7.5 | 10 | 15 | 20 | 25 | 30 | |
Motor for Vertical Travel of Cross Rail | H.P. | 2 | 2 | 2 | 3 | 3 | 5 | |
Motor for Rapid Traverse | H.P. | 2 | 2 | 2 | 3 | 3 | 5 |
We bring forth for our clients Hand Shearing Machines, which are outfitted with four edge blades and handle. These user friendly and precision engineered machines are utilized for cutting sheets, rounds, flats, angle, bar and other. Our range is available in different models for different works and capacities. The machines we offer our are widely acclaimed for delivering high operation efficiency in various conditions and fulfilling various requirements of diverse industries.
PARTICULARS |
VIS 200(8”) |
VIS 300(12”) |
Vis 400(16”) |
VIM 300(12”) |
VIM 400(16”) |
Blade Size |
40 x 12 |
50 x 12 |
50 x 12 |
50 x 20 |
50 x 20 |
Plate Size of body |
25 mm |
28 mm |
28 mm |
40 mm |
40 mm |
Weight Aprx |
27 kgs |
40 kgs |
70 kgs |
75 kgs |
98 kgs |
Strole Length |
145 mm |
245 mm |
345 mm |
245 mm |
345 mm |
Cutting Capacity |
1.5 to 2.0 mm |
2.0 to 2.5 mm |
2.0 to 2.5 mm |
3.0 to 4.0 mm |
3.0 to 3.5 mm |
Cutting Edge |
4 edge |
4 edge |
4 edge |
2 edge + 4 edge |
2 edge + 4 edge |
Lubrication |
AT ALL INDICATED POINTS |
Product Name | C Type Power Press |
Rajesh brand mechanical Power Presses are coming in "C" frame versions from 3 tons to 250 tons capacity in most economical type of construction with sevral std./optional features such as manual/auto lubrication systems, knockouts electronics safety, Single/Double or Un-geared versions as also Pneuma
FRAME:THE FRAME IS MADE OF STEEL CONSTRUCTION AND THEIR HEAVY CROSS SECTION AND RIGIDDESIGN ASSURE MINIMUM DEFLECTION AND ACCURATE ALIGNMENT CAST IRON LEGS WILL BE SUPPLIED UP TO 30 TON PRESS.
CRANK SHAFT :CRANK SHAFT MATERIALS ARE MADE OF SPECIAL ALLOY STEEL TO WITHSTAND THE EFFECTIVE LOADSITTED IN BUSHER WITH HIGH ACCURACY.
GEARS & CLUTCH :THE GEARS ARE MADE OF CAST STEEL OR FABRICATED AND IT TEETH ARE GENERATED BY HOBBING THE CLUTCH IS PROVIDED OF PIN / ROLLING KEY TYPE ALSO IT IS RIGID AND WELL SUPPORTED FOR THE MASS PRODUCTION CLUTCH CAN GIVES CONTINUOUS STROKE.
FLYWHEEL :THE FLYWHEEL IS MADE OF HIGH GRADE CASTIRON AND IS BALANCED FOR STORNG AND RELEAS ING ADEQUATE ENERGY FOR THE PRESSING OPERATIONS.
LUBRICATION :AN ACCURATE LUBRICTION SYSTEM HAS BEEN PROVED FOR LUBRICATIONS THE SLIDING SURFACE AND MOVING PARTS.
TABLE & RAM :TABLE AND RAM ARE MADE OF HIGH GRADE HEAVY DUTY CAST IRON & PROPERLY SEASONED. THEY AREPERFACTLY
ALIGNED TO BACH OTHER TO OBTAIN HIGH ACCURACY & PRECISION PRESS OPERATION.
Description | 3 Tons | 5 Tons | 10 Tons | 10 Tons | 20 Tons | 20 Tons | 30 Tons | 30 Tons | 50 Tons | 50 Tons | 75 Tons | 100 Tons | 150 Tons | 200 Tons | 250 Tons |
Crank Shaft Diameter |
38 | 51 | 60 | 60 | 76 | 76 | 83 | 83 | 105 | 105 | 121 | 134 | 152 | 158 | 165 |
Stroke Adjustment |
2-25 | 6-25 | 6-25 | 6-51 | 13-51 | 13-76 | 13-63 | 13-76 | 13-76 | 13-102 | 13-115 | 13-127 | 13-152 | 13-158 | 13-165 |
Length & Width of Bed | 203×152 | 305×178 | 381×255 | 381×255 | 508×305 | 508×305 | 558×356 | 558×356 | 750×520 | 750×520 | 863×596 | 914×635 | 965×685 | 1016×738 | 1016×778 |
Distance Bed TO Ram |
127 | 153 | 205 | 205 | 280 | 280 | 292 | 292 | 406 | 406 | 483 | 483 | 495 | 519 | 544 |
Hole in Ram | 19 | 25 | 25.4 | 25.4 | 32 | 32 | 38 | 38 | 38 | 38 | 45 | 51 | 57 | 63 | 63 |
Hole in Bed | 51 | 63 | 76 | 76 | 83 | 83 | 89 | 89 | 127 | 127 | 152 | 178 | 191 | 216 | 229 |
Fly Wheel Diameter |
330 | 405 | 435 | 435 | 550 | 550 | 660 | 660 | 810 | 810 | 910 | 1016 | 1118 | 1150 | 1320 |
Stroke Per Minute | 85 | 85 | 75 | 75 | 60 | 60 | 60 | 60 | 55 | 55 | 50 | 45 | 40 | 30 | 30 |
H.P. Required |
0.5 | 0.5 | 1 | 1 | 2 | 2 | 3 | 3 | 5 | 5 | 7.5 | 10 | 15 | 20 | 25 |
Weight Approx Kgs. |
150 | 275 | 500 | 500 | 1000 | 1000 | 1350 | 1350 | 2750 | 2750 | 4200 | 5500 | 6600 | 9000 | 11500 |
We manufacture, supplies and export lathe machine, Light Duty Lathe Machine, Heavy Duty Lathe Machine and more
Std.Accessories | |||
Chuck Plate | Chaingear Set (Inch & mm) | ||
Tool Post Key | 2 Nos.-Deadcenter | ||
01-Nos. sleeve Adaptor | Motor PullyS | ||
R/F Switch & Fitting |
Size | 4' 6'' | 5' 3'' | 6' |
Length of Bed | 1370 (4'6") | 1600(5' 3'') | 1825 (6') |
Width of Bed | 240 | 240 | 24 |
Hight of Center | 175 | 175 | 175 |
Swing over Center Slide | 210 | 210 | 210 |
Swing over Bed | 350 | 350 | 350 |
Swing in Gap | 525 | 525 | 525 |
Admit Between Center | 725 | 940 | 1170 |
Spindle Bore | 38 | 38 | 38 |
Approx Weight | 500 Kg. | 550 Kg. | 625 Kg. |
No. of Spindle Speed | 8/30 to 750 RPM | ||
Threading Range | 0.5 TO 7 mm /4 TO TPI | ||
Tail Stock Spindle Travel | 125 | ||
Tail Stock Tapper | MT-3 | ||
Leadins Screw Dia./Threads | 25/4TPI | ||
Electric Motor/Spped | 1 H.P /1440 RPM/62 PULLY |
Std.Accessories | |||
Chuck Plate | Chaingear Set (Inch & mm) | ||
Tool Post Key | 2 Nos.-Deadcenter | ||
01-Nos. sleeve Adaptor | Motor PullyS | ||
R/F Switch & Fitting |
Size | 4' 6'' | 5' 3'' | 6' | 7' |
Length of Bed | 1370 (4' 6'') | 1600 (5' 3'') | 1825 (6') | 2125 (7') |
Width of Bed | 280 | 280 | 280 | 280 |
Height of Center | 225 | 225 | 225 | 225 |
Swing over Center Slide | 425 | 425 | 425 | 425 |
Swing over Bed | 270 | 270 | 270 | 270 |
Swing in Gap | 650 | 650 | 650 | 650 |
Admit Between Center | 550 | 850 | 1000 | 1305 |
Spindle Bore | 52 | 52 | 52 | 52 |
Approx Weight | 650 Kg. | 700 Kg. | 750 Kg. | 850 Kg. |
No. of Spindle Speed | 6/46 To 570 RPM | |||
Threading Range | 4 TO 48 TPI / 0.5 TO 7mm | |||
Tail Stock Spindle ravel | 150 | |||
Tail Stock Tapper | MT-4 | |||
Leadins Screw Dia./Threds | 32/4TPI | |||
Electric Motor/ Speed | 1.5 H.P./1440 RPM / 62Pully |
"Perfect Choice For Perfect Cutting"
Special Feature
MODEL | SM 175 | SM 200 | SM 300 | SM 350 | SM 400 |
Cutting Capacity | |||||
Round bar mm | 175 | 200 | 300 | 350 | 400 |
Square mm | 150x150 | 175x175 | 250x250 | 200x300 | 350x350 |
Blade Size mm | 3000x27x0.9 | 3000x27x0.9 | 3760x27x0.9 | 4100x34x1.1 | 4420x34x1.1 |
Motor Power Require | 1 HP/1440RPM | 1 HP/1440 RPM | 2 HP/960RPM | 2HP/960 RPM | 2 HP/960 RPM |
Coolant Pump Power Require | 0.15 HP/2800 RPM | 0.15 HP/2800 RPM | 0.15 HP/2800 RPM | 0.15 HP/2800 RPM | 0.15 HP/2800 RPM |
Blade Speed Mr/Min. | 37-52-70 | 22-37-55-75 | 22-37-55-75 | 22-37-55-75 | 22-37-55-75 |
Net Weight in kg | 310 | 340 | 780 | 850 | 925 |
Over all Dimensions LxWxH | 1.58X0.58X0.95 | 2X0.85X1 | 2.4X0.85X1.2 | 2.6X0.9X1.2 | 2.7X0.9X1.2 |
"Premier Solution for Welding"
Jagdish forced air cooled, welding Rectifiers, Deigned to provide DC welding current. They are built using state-of-the-art solid state technology to meet the stringent demands of high quality welding from todays fabrication industries including power plants, chemical process plans offshore works steel plans thermal power plants, mining and structural fabrications etc.
Jagdish also manufactures moving coil type D.C rectifiers too the machines are available in fully copper winding and aluminium winding too.
SALIENT DESIGN
MODEL | Unit | JSW-6 | JSW-8 | JSW-10 | JSW-15 | JSW-20 |
Rating @ 50%Duty cycle | KVA | 6 | 8 | 10 | 15 | 20 |
Nominal Throat Clearance | mm | 250 | 250 | 250 | 250 | 250 |
Throt depth | mm | 200 300 400 |
300 400 500 |
300 400 500 |
300 400 500 |
300 |
Welding Range | - | - | - | - | - | - |
Mild Steel Max.2x | mm | 2.0 1.6 1.0 |
2.5 2.0 1.25 |
3.0 2.5 1.5 |
3.5 3.0 1.0 |
3.25 |
Sheet Thikness Min.2x | mm | 0.3 0.25 0.1 |
0.35 0.3 0.2 |
0.4 0.3 0.2 |
0.6 0.5 0.1 |
0.5 |
Brass Sheet Max.2x | mm | 0.8 0.7 0.45 |
1.0 0.9 0.6 |
1.2 1.1 0.75 |
2.0 |
1.6 |
Thickness min.2x | mm | 0.17 0.1 0.08 |
0.2 0.1 0.08 |
0.25 0.2 0.12 |
0.3 0.2 0.1 |
0.2 |
Stainless steel Max.2x | mm | 1.6 1.4 0.8 |
2.0 1.8 1.0 |
2.4 2.2 1.2 |
3.0 2.4 0.9 |
3 |
Sheet Thiknes Min.2x | mm | 0.25 0.2 0.12 |
0.3 0.25 0.15 |
0.32 0.28 0.18 |
0.4 0.3 0.1 |
0.3 |
Max. Available short ckt. Current KA Primary Supply Voltage | 6.5 | 6 5.5 8 |
7.5 7 8.5 |
7.5 6 11 |
10 8 - |
|
V | 230/415 | 230/415 | 230/415 | 230/415 | 415 | |
Phase | 1-2 | 1-2 | 1-2 | 1-2 | 2-3 | |
Normal Electrode Force (Approx) | Kg. | 150 100 75 |
150 100 75 |
150 100 75 |
150 100 60 |
100 |
Max. Electrode Stock | Mm | 70 | 70 | 70 | 70 | 70 |
External Water supply at max. Temp.30*c | Lit/min. | 3 | 3 | 3 | 5 | 5 |
Size of mains Supply Copper cable | Mm2 | 8 | 10 | 12 | 15 | 20 |
Recommended Swtch Raing | Amps | 30 | 30 | 30 | 30 | 30 |
Delayed Action fuse Rating | Amps | 20 | 20 | 20 | 30 | 30 |
- | Hmm | 1145 | 1145 | 1145 | 1145 | 1145 |
Approx. Dimensions Without Arm | Lmm | 455 | 455 | 455 | 455 | 455 |
- | Wmm | 330 | 330 | 330 | 330 | 330 |
Approx.Weight Without Arm | Kgs. | 105 | 125 | 142 | 147 | 155 |
We offers Air Compressors, Screw Compressors, Vacuum Pumps, Borewell Pumps , After Cooler, Air Dryer, Air Receiver, On line Filter and Industrial Machines
Optional Accessories | Standard Accessories (with Receiver) |
DRIVE-ELECTRONIC MOTOR/ENGINE DRIVEN | SAFETY VALVE |
REGULATION-CONSTANT SPEED/DUAL CONTROL | SERVICE VALVE |
BASE PLATE NOUNTED COMPRESSOR | DRAIN VALVE |
AIR DRYER-REFRIGERATED/HEATLESS | PRESSURE GAUGE |
AUTOMATIC CONDENSATE DRAIN VALVE | PRESSURE CONTROL SWITCH |
ONLINE FILTERS, ELECTRIC STARTERS | V-BELT |
AIR / WATER COOLED AFTER COOLERS | BELT GUARD |
VERTICAL AIR RECEIVERS | MOTOR PULLEY |
MOTOR SLIDE RAIL ETC |
Model No. | Motor HP | No.of PISTON | Pressure PSIG | Piston Displacment CFM | Reveiver LITRES |
GC-05S | 0.5 | 1 | 150 | 2 | 25 |
GC-05S | 0.5 | 1 | 150 | 2 | 45 |
GC-101 | 1 | 1 | 150 | 3.2 | 70 |
GC-102 | 1 | 2 | 150 | 4 | 70 |
GC-151 | 1.5 | 1 | 150 | 4.5 | 70 |
GC-201 | 2 | 1 | 150 | 6 | 135 |
GC-202 | 2 | 2 | 150 | 6.2 | 135 |
GC-285EL | 3 | 2 | 100 | 9 | 160 |
GC-285EL | 3 | 2 | 100 | 13.2 | 160 |
GC-294 | 5.0/7.5 | 2 | 80 | 24.0/31.0 | 200 |
GC-305 | 7.5/10.0 | 2 | 60 | 47.6.52.0 | 240 |
GC-57S2 | 12.5/15.0 | 2 | 40 | 65.8/88.0 | 300 |
GC-65S2 | 15.0/20.0 | 3 | 40 | 99.0/132.0 | 500 |
GC-65S2D | 30.0/40.0 | 3+3 | 40 | 198.0/264.0 | 750 |
Two / Multi Stage High Pressure Compressors
Model No. | Motor HP | No.of PISTON | Pressure PSIG | Piston Displacment CFM | Reveiver LITRES |
GC-284 | 2.0/3.0 | 2 | 200 | 6.7/9.8 | 160 |
GC-2390 | 3.0/5.0 | 2 | 200 | 8.9/11.0 | 160 |
GC-292 | 5.0/7.5 | 2 | 200 | 14.0/19.0 | 200 |
GCIT50 | 5.0/7.5 | 2 | 150 | 14.3/19.0 | 200 |
GC-2525 | 5.0/7.5 | 2 | 200 | 17.3/22.0 | 200 |
GCIT-100 | 7.5/10.0 | 2 | 150 | 22.5/30.0 | 300 |
GC-303 | 7.5/10.0 | 2 | 200 | 23.8/31.8 | 240 |
GC-2595 | 7.5/10.0 | 2 | 200 | 29.8/37.8 | 240 |
GC-121T2 | 10.0/12.5 | 2 | 200 | 32.9/44.0 | 300 |
GC-7150 | 12.5/15.0 | 2 | 200 | 55.0/60.5 | 300 |
GCIT-100D | 15.0/20.0 | 2+2 | 150 | 45.0/60.0 | 500 |
GC-65T | 15.0/20.0 | 3 | 200 | 54.4/81.8 | 500 |
GC-75T | 20.0/25.0 | 3 | 150 | 65.8/98.7 | 500 |
GC-3050 | 25.0/40.0 | 3 | 150 | 85.8/112.0 | 500 |
GC-65TD | 30.0/40.0 | 3+3 | 150 | 110.0/145.0 | 750 |
GC-75TD | 40.0/50.0 | 3+3 | 150 | 132.0/166.0 | 750 |
GC-281 | 3 | 2 | 500 | 7.4 | - |
GC-301 | 5 | 2 | 500 | 10.8 | - |
GC-57T2 | 7.5 | 2 | 500 | 24.7 | - |
GC-65T2 | 15 | 3 | 1000 | 41.3 | - |
CAPACITY | - | PH 2040 | PH 2060 | PH 2448 | PH 2460 |
Max. Table Size | mm | 500x1000 | 500x1500 | 600x1200 | 600x1500 |
Max. Longitudinal Travel | mm | 1075 | 1575 | 1275 | 1575 |
Max. Cross Traverse | mm | 550 | 550 | 650 | 650 |
Max.Spindle Center Hight above Table | mm | 750 | 750 | 750 | 750 |
SPEED AND FEEDS | |||||
Max.able Speed | m/min | 18 | 18 | 18 | 18 |
Power Cross Traverse | mm/min | 1000 | 1000 | 1000 | 1000 |
Auto Cross Feed at each Table reversal | - | - | - | - | - |
infiniely variable) | mm/min | 0.5 to 10 | 0.5 to 10 | 0.5 to 10 | 0.5 to 10 |
Leas Count of Vertical feed head wheel | mm/min | 0.002 | 0.002 | 0.002 | 0.002 |
GRINDING HEAD | |||||
Size Of Grinding Wheel | mm | 300x50x76.2 | 300x50x76.2 | 300x50x76.2 | 300x50x76.2 |
Power Of Spindle Motor | HP | 5 | 5 | 5 | 5 |
Speed Of grinding spindle | RPM | 1400 | 1400 | 1400 | 1400 |
HYDRAULIC SYSTEM | |||||
Working Pressure | Kg/cg | 20 | 20 | 20 | 20 |
Motor | HP. | 5 | 5 | 5 | 5 |
Tank Capacity | Lrs. | 150 | 150 | 150 | 150 |
GENERAL | |||||
Machine Hight | mm | 2150 | 2150 | 2150 | 2150 |
Floor Space | mm | 2900x2100 | 3850x2100 | 3300x2300 | 3850x2300 |
Net Weight | kg | 5500 | 6500 | 6500 | 7000 |
CAPCITY | - | PH 1224 | PH 1230 | PH 1240 | PH 1632 |
Max.Table Size | mm | 300x600 | 300x750 | 300x1000 | 400x800 |
Max.Longiudinal Travel | mm | 675 | 825 | 1075 | 875 |
Max. Cross Traverse | mm | 350 | 350 | 350 | 450 |
max.spindle Center Hight above table | mm | 750 | 750 | 750 | 750 |
SPEED AND FEEDS | |||||
Max.Table Speed | m/min. | 18 | 18 | 18 | 18 |
Power cross Traverse | min. | 1000 | 1000 | 1000 | 1000 |
Auto Cross Feed a each Table reversal | - | - | - | - | - |
(infinitely variable) | mm | 0.5 to 10 | 0.5 to 10 | 0.5 to 10 | 0.5 to 10 |
Least Count of vertical feed head wheel | mm | 0.002 | 0.002 | 0.002 | 0.002 |
GRINDER HEAD | ||||||
Size of Grinder wheel | mm | 250x25x76.2 | 250x25x76.2 | 250x25x76.2 | 300x50x76.2 | 300x50x76.2 |
Power of spindle motor | HP | 3 | 3 | 3 | 5 | 5 |
speed of grinding spindle | RPM | 2800 | 2800 | 2800 | 1400 | 1400 |
HYDRAULIC SYSTEM | ||||||
Working Pressure | kg/cm | 20 | 20 | 20 | 20 | 20 |
Motor | hP | 2 | 2 | 2 | 2 | 2 |
Tank capacity | Lrs. | 75 | 75 | 75 | 75 | 75 |
GENERAL | ||||||
Machine height | mm | 1950 | 1950 | 1950 | 1950 | 1950 |
Floor space | mm | 1900x1725 | 2350x1725 | 2900x1725 | 2450x1825 | 2900x1825 |
Net weight | kg | 1950 | 2300 | 2700 | 2700 | 3000 |
Excellent qulity machine with 26 years of experience
Available in 3 models (i)40mm (ii) 50mm (iii) 65mm
Continious Quality control to achive high quality
All parts Manufactured in one roof facilities
Spindle running in a set 3 nos. best quality bearing which permit heavy duty applications.
9 nos. spindle speed (50 to 805 RPM)
Radial arm swivels 360 degree
Specialist in 65mm (Extra Heavy duty)
Double Column Pillar
Accuracy movement with in 12 micron
Gear made in EN-23 material.