Goa, India
GST : 30AALPF2726P1ZO
Verified
Add Review
Our Products
The Blastcrete Model RD6536 Pump is our concrete pump with variable speed from 0-25 cubic yards per hour. This pump is designed to pump up to 3/4 inch aggregate concrete, concrete block fill (grout), shotcrete, floor leveling cement, mud jacking, and cellular concrete. The machine is powered by a 29 HP Kubota water cooled diesel and is equipped with our 1000 lb. capacity receiving hopper with hydraulic agitator. The unit is mounted on a single axle high speed towing trailer with electric brakes and electric braking lights.
Applications
|
|
|
|
|
|
|
|
|
Concrete Mixers (Cement mixer) are used for the production of concrete using a revolving drum to mix the ingredients comprising of cement, water and aggregate (sand and/or gravel).
For light commercial works, such as residential renovation, concrete repair or small-scale construction projects, portable mixers are used to produce concrete or grout, at the construction site.
This saves cost and time in transporting and placing the concrete, before it hardens.
Concrete mixers are categorized based on the following criteria:
|
|
|
|
Cement, sand and other aggregates are loaded in a hydraulically operated hopper and then poured in the mixing drum for final mixing and can be unloaded by tilting the drum. While in Hand Feed Concrete Mixers, cement, sand and other aggregates are directly added to the mixing drum manually
The Atlantic HPP range of industrial hydraulic power packs works well with high-performance diamond tools for drilling and cutting such as cut-off saws, diamond chain saws, ring saws, submersible pumps, rock drills, core drills and other equipment. The availability of wide and solid wheels makes it highly portable and allows working in remote site conditions.
The Blastcrete Genuine Piccola Gunning Machine is our simple solution for gunning applications from 0-6 tons per hour. The 16 AM air motor or 5 HP electric motor drives our heavy duty gearbox, which rotates the rotor section. The unit offers precise material output control and is the most economical gunning machine on the market to purchase, operate, and maintain.
Applications
|
|
|
|
|
Where beastly power needs to be combined with preparation and conveyance of coarse-grained wet mixes and operational friendliness, the pneumatic conveyor ASP 500 E is an ideal solution.
A large pressure vessel, unique forced agitation system with agitation blades made from special wear-resistant steel material, simple operation and high reliability are the basis for the popularity among contractors of this machine. A sufficient external source of air assures delivery at sufficient conveying distances.
The AVS 500 is our deluxe sand, sump, rock, slurry, and water handling industrial vacuum system. The AVS 500 is designed to transfer material under vacuum in mining, chemical, construction and offshore drilling applications. The pump is capable of transfer rates up to 8 m3/hour, material dependent, all while delivering the same through its 4" discharge port.
Atlantic launches its new Cementitious Fireproofing/Plastering Machine AWP 5. It comes with a 2L6 Worm Pump which can handle a number of different materials like pre-mixed plasters, fireproofing materials, acoustic, fiber glassed reinforced materials and many more. The modular system is suitable for spray pumpable wet mortars with grain size of up to 4 mm and it's easy to use features makes operation on site simple and and economical.
A portable industrial vacuum machine that is deisned to handle wet & dry materials, while being cost effective. The powerful All Vac can Vacuum wood shavings, sand, gravel, leaves, compost, mud, sludge, glass & debris with a working dist. Of 30 m (100 ft.). The blower protection facilitates handling the dirtiest product. Can fill 0.14 m3 (5 ft3) in the hopper within 3 minutes.
Atlantic Worm Pump AWP 7.5 TM is the world's most versatile mortar pump. The unique twin mix tank design permits continuous pumping as each tank alternates feeding the hopper. It can handle different materials such as pre-mixed plasters, cementitious fire-proofing materials, site mixed mortars, acoustic, fiber-glass reinforced materials and many more. The modular pump system makes it simple to operate, economical to maintain and capable of spraying wet mortars with grain size of up to 5 mm.
Atlantic Hydraulic Concreter Mixer is a self-loading mixer with hydraulic bucket to ease loading on construction sites. It comes with 23 HP Lombardini diesel engine which enable homogeneous mixing of cement and aggregate to produce concrete suitable for foundations and floor slabs works
The Atlantic Concrete Drum Mixers are standalone mixers with pneumatic wheels, steering and reinforced tow bar for safe and easy movement. Fitted with a device for absorbing vibrations which are produced by diesel engines, for a noiseless machine.
Atlantic Injection Machine AIM 5000 is a single type high pressure injector designed to apply urethane resin and epoxy injection material to the crack parts. As this electronic injector is easy to handle, easy to change consumables, and compact, while providing high discharging pressure, it is widely used in concrete repairing and reinforcing works.
AIM 5000 is extremely lightweight and powerful injection pump can be used for most of the polyurethane and epoxy injection line products with viscosities between 50 and 25000 cps.
The new compact mixer in a futuristic design. The control elements are integrated in the all-round handle. The anti-slip pad enables safe working. Excellent value for money. These mixers are developed for professional use and convince with comfortable handling and perfect mixing results.
Turbidity Eco Barriers Atlantic supplies silt curtains to the dredging, offshore petro chemical industry and civil construction sectors. A full range of turbidity barriers, complete with floatation elements and ties for holding the membranes are provided to sand reclaiming, waste pollution control, port construction, lake and channel dredging projects.
They are flexible vertical floating turbidity barriers extending from surface of the water to a specific desired depth, designed to prevent the spread of silt and sediment during dredging, marine construction or pile driving activities in waterbodies.
Atlantic supplies high quality, heavy duty Canvas Tarps which are excellent abrasion and tears resistant. Custom made to your specific requirement.
Fire Retardant Anti-Static Tarps
Fire Retardant Anti-Static Tarps are highly engineered fabrics with the ability to handle temperature from -55o to +260o C. They are used in Mining operations, Petrochemical plants, Oil rigs, High Flammability areas, High combustion areas and Hospitals.
PVC Traps
PVC Traps are made from reinforced PVC of high quality of 600 to 700 GSM. These UV treated resins are suited for extreme temperature variations, custom made to suit your requirements and 100% waterproof. Welded reinforcing and wear strip points
Geotextiles are permeable polypropylene or polyester fabrics with the ability to filter, separate, protect and drain selectively. Geotextile products are placed at the tension surface to strengthen soil, hence have found applications in Construction, Marine, Petrochemical and Quarrying sectors.
They are widely used in embankments, retaining structures, reservoirs, canals, dams, bank protection, and coastal protection
Geotextile Grout Bags / Concrete Mattress are made from double-layer high strength polyester and polyamide fabrics, which come in rolls of varying sizes equipped with filling vents making it easy to install and fill. The mattress is filled by pouring concrete through the vent, excess water is expelled through the pores retaining concrete within the mattress. Grout Bags / Concrete Mattress is used in erosion control, stabilization of banks and slopes, protection and ballast of underwater pipelines, flexible formwork for underwater cement mixtures injection.
Sand Bag are cost effective shoreline "armoring" which can be can be stacked one top of the other to form rock hard structures which help prevent coastal erosion.
Geotextiles are permeable polypropylene or polyester fabrics with the ability to filter, separate, protect and drain selectively. Geotextile products are placed at the tension surface to strengthen soil, hence have found applications in Construction, Marine, Petrochemical and Quarrying sectors.
They are widely used in embankments, retaining structures, reservoirs, canals, dams, bank protection, and coastal protection
Geotextile Grout Bags / Concrete Mattress are made from double-layer high strength polyester and polyamide fabrics, which come in rolls of varying sizes equipped with filling vents making it easy to install and fill. The mattress is filled by pouring concrete through the vent, excess water is expelled through the pores retaining concrete within the mattress. Grout Bags / Concrete Mattress is used in erosion control, stabilization of banks and slopes, protection and ballast of underwater pipelines, flexible formwork for underwater cement mixtures injection.
Sand Bag are cost effective shoreline "armoring" which can be can be stacked one top of the other to form rock hard structures which help prevent coastal erosion.
Geotextiles are permeable polypropylene or polyester fabrics with the ability to filter, separate, protect and drain selectively. Geotextile products are placed at the tension surface to strengthen soil, hence have found applications in Construction, Marine, Petrochemical and Quarrying sectors.
They are widely used in embankments, retaining structures, reservoirs, canals, dams, bank protection, and coastal protection
Geotextile Grout Bags / Concrete Mattress are made from double-layer high strength polyester and polyamide fabrics, which come in rolls of varying sizes equipped with filling vents making it easy to install and fill. The mattress is filled by pouring concrete through the vent, excess water is expelled through the pores retaining concrete within the mattress. Grout Bags / Concrete Mattress is used in erosion control, stabilization of banks and slopes, protection and ballast of underwater pipelines, flexible formwork for underwater cement mixtures injection.
Sand Bag are cost effective shoreline "armoring" which can be can be stacked one top of the other to form rock hard structures which help prevent coastal erosion.
Concrete Buckets are specialized equipment for mass concrete placement in large civil projects. They come with bottom discharge to allow flow of concrete from the bucket, can be moved about on site with the help of tower crane. The buckets are custom built hence come in different sizes, shapes and capacity, and are used in nuclear plant, hydroelectric plant, high raised building project, bridges building projects, etc.
The Blastcrete Mason Mate is our newly designed labor saving technology that is equipped with our D3522 hydraulic squeeze pump, our high shear continuous mixer, 1000 lb. bag lifter, and operated with 35 HP Briggs and Stratton gasoline engine. The Blastcrete Mason Mate is designed for high rise block fill applications. This machine eliminates CMU block fill bucket brigades while reducing on the job labor by up to 75%. The unit is designed to fit within a freight elevator or can be placed with a telescoping forklift or crane. Designed to reduce dust, increase material placement time, and maximize your profitability.
The Blastcrete MineMate is our newly designed labor saving technology that combines our X-10 ultra high pressure swing tube piston pump with our high shear continuous mixer. The MineMate is designed to mix and pump concrete materials for underground mine seals, grouting, and underground shotcrete applications when ready mix concrete is not an option. This machine is capable of mixing and pumping up to 12 cubic yards per hour and pumping material in excess of 500 ft. This low profile machine is also equipped with a material screw conveyor with bin indicator for charging the continuous mixer.
The MX-10 is our ultra high-pressure 3-inch swing tube mixer/pump designed for dense refractory shotcrete and pump cast applications. Since 1996, this machine has become the industry standard for monolithic refractory installations. Our high torque pan mixer combined with our ultra high pressure piston pump can consistently deliver 10 tons per hour. This machine is commonly used to pump refractory materials in excess of 300 ft. vertical during the most demanding refractory installations. Our swing out receiving hopper allows easy access to the lower hopper for cleaning and maintenance and the lower hopper is equipped with forklift tubing for easy flat pack removal. Fastest return on investment, best equipment, outstanding customer service, WORLDWIDE!
The New Blastcrete Dampcon Rig is our exciting predampening and gunning system designed to predampen and install dry process shotcrete materials. The unit is equipped with our 9 cubic ft. capacity paddle style mixer with wipers and swing out capability, material elevator, and the proven 020 'Piccola' rotary gunite machine that includes the single bolt clamping system. The Dampcon Rig was designed for simple operation, easy clean up and minimal maintenance. The unit is ideal for precise refractory gunning installations and concrete repair applications. The Blastcrete Dampcon Rig is powered by a Kubota V1505 29 HP water cooled diesel engine or a 30 HP electric motor. Mounting options include a tandem axle trailer or skid mounted with forklift pickup.
The Blastcrete Hydrostatic Rotary Gunite machine has become the industry standard for refractory gunning applications since its inception in 1987. The unit is equipped with the simple single point Piccola clamping system, manual ON/OFF hydraulic control, and hydrostatic variable rotor speed control. The Blastcrete Hydrostatic Rotary Gun can be powered with an electric motor, air motor, gasoline, or diesel engine. This machine is the smoothest rotary gun within the refractory gunning arena.
The Blastcrete Model D3522 Attachment is our solution for hot epoxy grouting contractors that currently own hydraulic power units. Simply couple the D3522 Attachment to your hydraulic power and this pump offers variable speed pumping from 0-6 cubic yards per hour and delivers up to 400 PSI pumping pressure. These are the most simple and safe epoxy pumps on the market to maintain and operate. Since no epoxy material comes in contact with the moving parts of the pump, you will be pleased with the life of this machine.
The Blastcrete Predampener is designed to add up to 5% moisture to gunning materials to insure proper hydration at the nozzle with minimal rebound. Our predampener is completely hydrostatic allowing precise material predampening and output control. This unit is equipped with 2 solenoid activated water nozzle with simple water volume adjustment.
The Blastcrete Multirig is designed for field batching concrete sand and cement for dry process shotcrete applications. This unit is equipped with our 1, 500 lb. capacity pan mixer that is easily loaded with a skid steer. The material is blended in 1.5 to 2 minutes and discharges from the bottom slide door onto the rubber belt conveyor. The conveyor simply feeds our rotary gunite machine that is variable speed from 0-6 tons per hour. This machine is powered with a reliable 29 HP Kubota water cooled diesel.
The Blastcrete Model MX-20CM mixer/pump has been designed to revolutionize refractory placement. This machine can be used for both small refractory installations of 2-3 tons per hour as well as high volume installations of up to 25 tons per hour. The machine features a compact two-stage high-shear primary continuous mixer where the material is hydrated, and a medium shear secondary mixer that is mounted in the receiving hopper of the 4 in. high pressure swing tube pump. While the discharge pressure of the 4 in. pump is an industry leader, the hydraulic pressure to operate the pump is much lower because of oversized differential cylinders. The popular and proven swing out receiving hopper is also a feature of the new pump making it much easier to clean and service. Dust generated in charging the continuous mixer is all but eliminated, and the clean up of the continuous mixer is much quicker and generates very little waste. The efficiency of the two stage mixer and pump with oversized differential allow for the machine to require only 100 H.P. which lowers fuel consumption by 50% when compared to competitive machines. The towing weight of the machine is only 7, 500 pounds.
The Blastcrete Model H 020 is our simple hydraulic rotary gunite machine attachment that is variable speed from 0-5 cubic yards per hour. This machine is equipped with the proven Genuine Piccola single point clamping system and offers precise material output control. The hydraulic requirement is 10 GPM @ 1500 PSI and is universal with any hydraulic power unit with this capacity. Since this is a hydraulic machine, the air requirement is only 225 CFM.
The ChemGrout CG-500/031 High-Capacity Geothermal Series has been designed specifically for grouting geothermal loops. These skid mounted grout plants efficiently mix and pump the high ratio sand/bentonite materials specified by loop designers. The CG-500/031 feature two 70-gallon (265 liters) mixing tanks, a large 45-gallon (170 liter) holding hopper and rugged single-acting 3" piston grout pump. Each mixing tank is equipped with baffles, bag breaker and a variable speed high-efficiency paddle mixer that provides rapid grout mixing. Tank outlets are large slide gates that allow viscous grouting materials to flow quickly into the removable holding hopper. The dual mix tanks alternately feed this large holding hopper providing continuous pumping rates up to 16 gpm. The grout pump is a 3" positive displacement, single acting piston pump that disassembles with only a hammer for fast and thorough cleaning. The rugged steel frame stands up to the toughest conditions on the job site. Operator controls are centrally located for efficient production.
The ChemGrout CG-502 unit is designed for maximum efficiency by allowing simultaneous operation of mixing and pumping with spraying options. It features an open throat size 4 progressive cavity non-pulsating positive displacement rotor-stator pump which gives steady and continuous flow of material. The CG-502 also comes with a single acting variable speed 030 piston pump for higher output. This grout pump handles a wide variety of materials ranging from fluid slurries, to heavily sanded grouts, with simple operation and low maintenance costs. Power options include air, hydraulic, electric hydraulic, gas hydraulic and diesel hydraulic.
The field proven CG-500 High-Pressure Series combines the latest advances in grouting equipment design with enhanced flexibility, offering maximum performance and versatility for grouting of mines, dams, tiebacks, foundations, soil and rock anchors. The CG-500 feature two 70 gallon mixing tanks, a 21 gallon holding hopper and a patented double acting, positive displacement, plunger pump which utilizes rapid disconnect "U" clip fasteners allowing rapid disassembly for cleaning and maintenance. Unique pump design allows operator to customize discharge pressures with an optional conversion kit with pressure outputs configurations of 1000, 1600 and 2000 psi.
The ChemGrout CG-600 is a 13 cubic foot high shear colloidal mixer, equipped with a high shear centrifugal diffuser-type pump that disperses the cementitous material down to its finest particle size to achieve complete particle wetness. The CG-600 features patented plunger pump 3 X 8 and 2 X 8 with output of 1000 psi and 2000 psi respectively.
The ChemGrout model CG-542 is a skid mounted air powered grout plant. The unit is specially designed with a low profile for grouting rock bolts and cable stays in tight quarters such as tunnels and mines. This system is designed to provide a mixing and pumping continuous operation. This unit features two 22-gallon mixing tanks, a 10-gallon holding hopper and a progressing cavity grout pump. The mixing tanks are equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valves are large slide gates that allow the thickest materials to fall easily into the pump hopper. The holding hopper is equipped with an auger to keep the material thoroughly mixed while waiting to be pumped and in connected directly to the suction of the grout to provide a continuous pumping operation. The grout pump is available in either a 6 stage, size 3, positive displacement, progressing cavity, rotor-stator type that will deliver 3.5 GPM, 522 PSI, or a 3 stage, size 4, positive displacement, progressing cavity, rotor-stator type that will deliver 5 GPM, 261 PSI. The rugged steel frame stands up to the toughest conditions on the job site. Operator controls are centrally located for efficient production. All components are easily accessible for operating, cleaning and maintenance.
He ChemGrout CG-620 Colloidal Mixer is a skid mounted system. The colloidal mixer is equipped with a high speed centrifugal diffuser-type pump that disperses the cementitious material down to its smallest size to achieve complete particle wetting (or wetness) and a powered bridge breaker to precondition material before entering the colloidal mixing pump. The rugged steel frame stands up to the toughest conditions on the job site. Operator controls are centrally located for efficient production. All components are easily accessible for operating, cleaning and maintenance. The ChemGrout CG-620/630 Colloidal Mixers are designed to be add on units to complement equipment that is already owned by the user.
The ChemGrout CG-600-3L6 Diesel Hydraulic, heavy duty grout plants for heavy construction projects such as precision post tension grouting, underground mining, tunnels and dams. The ChemGrout CG-600-3L6 Diesel Hydraulic has a 13 cubic foot colloidal mixer which is designed to provide a continuous mixing and pumping operation. It easily mixes and pumps slurries of neat cement, fly ash, bentonite, microfine cements and lime flour. The colloidal mixer is equipped with a centrifugal diffuser type pump rotating at speeds up to 2000 RPM that disperses the cementitous material down to its finest particle size to achieve complete particle wetness. The 3L6 3 stage progressive cavity pump gives output of 20 gpm at maximum pressure of261 psi.
Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.
Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.
Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.
The X-Cavator enables you to locate and safely excavate around delicate utilities without damaging them. There is no application too tough for the X-Cavator. Order yours with specific, powerful options to handle those crucial excavation jobs like:
Only Vac-Con combines the flexibility of a two-engine design to get the toughest jobs done right. Our efficient design, allowing the chassis engine to drive either the 3-stage fan or positive displacement blower vacuum system, actually saves you fuel and general wear and tear in the long run. Using a standard hydrostatic drive, this design can engage the industry's most powerful vacuum. Offering a wide array of options, this is truly a "go anywhere, do anything" machine.
VecLoader trailer-mounted industrial vacuums never need to be removed from the vacuuming site for dumping. VecLoader's can be used for extracting or vacuuming cement, coal, ash, dust, dirt, spent abrasive, sand, gravel, stone, slurry, water and most flowable bulk materials and liquids. The VecLoader is designed to facilitate various loading options such as, dump trucks, roll off boxes, gaylords, bulk bag, and other storage or disposal vessels.
The VecLoader Titan 721 trailer mounted industrial vacuum loader combines the power of a mid-size vacuum truck with the unique unloading advantages of VecLoader trailer mounted vacuums. The VecLoader Titan 721 is from Vector Technologies' Titan Series of trailer mounted vacuum loaders, featuring positive displacement blowers with both high CFM and high vacuum. The Titan 721's high vacuum of 28" Hg (inches of mercury) provides great flexibility when conveying longer distances or handling dense waste streams.
The Vector self-pulsing baghouse represents a thirty year legacy of proven safety and performance.
Details
Performance : Bulk dry materials load up to 18-21 tons/hour (425 gallons of water/minute) or at distances to 1, 200'.
Engine : Tier III John Deere Model 225 HP diesel engine with locking enclosure. Electric powered models are available.
Engine Rating : 6-cylinder; water-cooled turbo and inter-cooled diesel; 225 H.P. @ 2, 400 RPM.
Specifications : Direct Drive; variable operating speeds between 1, 000 to 2, 400 RPM; electronically governed; 12 volt electrical system; 15"/5 blade pusher fan; dry type air cleaner with safety element.
Control Panel : Engine controls include a Murphy PowerView. The PowerView is a multifunction tool that enables operators to view varied engine operating and service parameters including RPM, engine hours, voltage, coolant temp, oil pressure, fuel economy and consumption, throttle position and service codes.
Collector Unload : Collector raises to a maximum height of 8'-9", centerline 6'-0" from the rear edge of the trailer. Controls are included for automatic, cyclical discharge of collected materials. Collector has a pneumatic hopper vibrator and oiler. When the cyclone collector is in raised position, it is upheld by rigid support arms. Discharge is flanged to accept standard flanged gravity spout and other optional discharge valves.
Cyclone/baghouse : Cyclone collector with 7/8 yd3 (175 gallons) capacity in the conical storage section, flanged. Baghouse contains 156 ft2 of felted polypropylene cloth, continuously cleaned by reverse air pulses during the pulse cycle. Filter pulsing is controlled by a pressure switch and solenoid valves. A magnehelic gauge shows the differential pressure drop across filters.
Secondary Filter : Pleated cellulose micro filters are mounted on the blower, for final filtration and blower protection.
Trailer : Fully road ready with three 7000 pound axles, electric brakes, hand-operated parking brake, leveling jacks, all lights for legal night highway operation, heavy-duty ring-type hitch, LT235-85R-16 radial tires mounted on six lug spoke rims. Length: 21'-0", Width: 8'-2.5", Height: 11'-4", Weight: 15, 950#.
Innovative technology and superior airflow efficiency come standard on Vac-Con Industrial Vacuum Loaders. Simple to operate and maintain, our single mode machines can recover wet or dry material with up to 28" Hg. Equipped to handle the toughest jobs, these machines are right at home in the harshest environments. With options like the exclusive Automatic Material Return System and Hi-Dump, Vac-Con's world-class performance saves you money, time, and effort.
The VecLoader is an extremely powerful and robust industrial vacuum systems. The sheer size of this heavy duty workhorse, relates to its onsite performance and capability of generating a suction of 28" Hg with a flow of 3660 CFM. The unique design of the VecLoader makes it the ideal machine for clean-up, spill response and conveyance process in steel mills, carbide plants, cement plants, asbestos and hazardous waste removal applications. It directly discharges vacuumed products into a truck, dumpster or any other collecting device, without the need for shoveling, hoisting, dumping or other material handling equipment. The VecLoader can move coal, ash, dirt, blast media, sand, stone, slurry, industrial waste water and other flow able bulk materials through 6", 5", 4" or multiple smaller diameter hoses. Equipped with cyclone separators, filter receiver and a self-dumping hopper, the equipment is designed to suppress dust formation and dump waste without contaminating the surrounding.
Only Vac-Con uses the simplicity of a hydrostatic drive to power both the vacuum and water systems with a single engine. Both systems can be independently operated for multiple applications, while allowing for maximum flexibility. Looking for a single-engine machine? Vac-Con's unique design offers the best value without sacrificing performance, power or ease of operation.
Vac-Con, in cooperation with Vector Technologies Ltd, is proud to introduce the Neptune line of powerful, yet compact, trailer-mounted vacuums. These machines combine a high-pressure water jet system with a high-performance industrial vacuum. The Neptune is designed & manufactured for Vac.Con adding the power of portability to an impressive line of truck-mounted combination machines, excavators & industrial machines - all accessible through the extensive Vac.Con dealer network. The Neptune provides the same rugged construction, quality & field-tested durability that both Vac.Con & Vector owners have relied upon for over three decades! The Neptune can be configured to meet your specific demanding requirements.
Vac.Con, in cooperation with Vector Technologies Ltd, is proud to introduce the Mudslinger line of powerful, yet compact, trailer-mounted vacuums. These machines combine a high-pressure/low flow water jet system with a high-performance industrial vacuum. The Mudslinger is designed and manufactured for Vac.Con, adding the power of portability to an impressive line of truck-mounted combination machines, excavators and industrial machines - all accessible through the extensive Vac-Con dealer network. The Mudslinger provides the same rugged construction, quality and field-tested durability that both Vac.Con and Vector owners have relied upon for over three decades! The Mudslinger can be configured to meet your specific demanding requirements.
VecLoader Spartans are versatile vacuum systems combining exceptional power and filtration with compact size. Spartans are capable of vacuuming most flowable bulk material and liquids in a wide range of industrial vacuum conveying or recovery settings. Modular in design, Spartans are easily matched to a broad assortment of cyclone separators, filter-receivers, collection systems, classifiers, self dumping hoppers and intermediate collection devices. Units are available in electric, diesel and LP power and in skid, crane truck and trailer mounted configurations. The Spartan FM is a heavy-duty/continuous portable (skid-mounted) vacuum loader with an integrated two-yard hopper. With a smaller footprint than the FM, but with comparable power, the compact Spartan II is engineered for flexibility in a wide range of applications and available as L.P, diesel or electric power. The Spartan II is towable by an in-plant vehicle, easily operated by one person and loads into 55 gallons drums. Spartan IIs are often matched to a one or two yd3 self-dumping hopper for added flexibility.
