Asia Pacific Engineering Services

Panjim, Goa

HRG-020 is a Hydrostatic Rotary Gunite machine which has become the industry standard for refractory gunning applications since its inception in 1987. The unit is equipped with the simple single point Piccola clamping system, manual ON/OFF hydraulic control, and hydrostatic variable rotor speed control. The Blastcrete Hydrostatic Rotary Gun can be powered with an electric motor, air motor, gasoline, or diesel engine. This machine is the smoothest rotary gun within the refractory gunning arena.Output 0-6 yard3 / hourMaximum Aggregate - 3/4"

Applications

Where beastly power needs to be combined with preparation and conveyance of coarse-grained wet mixes and operational friendliness, the pneumatic conveyor ASP 500 E is an ideal solution.

A large pressure vessel, unique forced agitation system with agitation blades made from special wear-resistant steel material, simple operation and high reliability are the basis for the popularity among contractors of this machine. A sufficient external source of air assures delivery at sufficient conveying distances.

Atlantic launches its new Cementitious Fireproofing/Plastering Machine AWP 5. It comes with a 2L6 Worm Pump which can handle a number of different materials like pre-mixed plasters, fireproofing materials, acoustic, fiber glassed reinforced materials and many more. The modular system is suitable for spray pumpable wet mortars with grain size of up to 4 mm and it's easy to use features makes operation on site simple and and economical.

Atlantic Worm Pump AWP 7.5 TM is the world's most versatile mortar pump. The unique twin mix tank design permits continuous pumping as each tank alternates feeding the hopper. It can handle different materials such as pre-mixed plasters, cementitious fire-proofing materials, site mixed mortars, acoustic, fiber-glass reinforced materials and many more. The modular pump system makes it simple to operate, economical to maintain and capable of spraying wet mortars with grain size of up to 5 mm.

The Blastcrete MineMate is our newly designed labor saving technology that combines our X-10 ultra high pressure swing tube piston pump with our high shear continuous mixer. The MineMate is designed to mix and pump concrete materials for underground mine seals, grouting, and underground shotcrete applications when ready mix concrete is not an option. This machine is capable of mixing and pumping up to 12 cubic yards per hour and pumping material in excess of 500 ft. This low profile machine is also equipped with a material screw conveyor with bin indicator for charging the continuous mixer.

The MX-10 is our ultra high-pressure 3-inch swing tube mixer/pump designed for dense refractory shotcrete and pump cast applications. Since 1996, this machine has become the industry standard for monolithic refractory installations. Our high torque pan mixer combined with our ultra high pressure piston pump can consistently deliver 10 tons per hour. This machine is commonly used to pump refractory materials in excess of 300 ft. vertical during the most demanding refractory installations. Our swing out receiving hopper allows easy access to the lower hopper for cleaning and maintenance and the lower hopper is equipped with forklift tubing for easy flat pack removal. Fastest return on investment, best equipment, outstanding customer service, WORLDWIDE!

The New Blastcrete Dampcon Rig is our exciting predampening and gunning system designed to predampen and install dry process shotcrete materials. The unit is equipped with our 9 cubic ft. capacity paddle style mixer with wipers and swing out capability, material elevator, and the proven 020 'Piccola' rotary gunite machine that includes the single bolt clamping system. The Dampcon Rig was designed for simple operation, easy clean up and minimal maintenance. The unit is ideal for precise refractory gunning installations and concrete repair applications. The Blastcrete Dampcon Rig is powered by a Kubota V1505 29 HP water cooled diesel engine or a 30 HP electric motor. Mounting options include a tandem axle trailer or skid mounted with forklift pickup.

The Blastcrete Model D3522 Attachment is our solution for hot epoxy grouting contractors that currently own hydraulic power units. Simply couple the D3522 Attachment to your hydraulic power and this pump offers variable speed pumping from 0-6 cubic yards per hour and delivers up to 400 PSI pumping pressure. These are the most simple and safe epoxy pumps on the market to maintain and operate. Since no epoxy material comes in contact with the moving parts of the pump, you will be pleased with the life of this machine.

The Blastcrete Model MX-20CM mixer/pump has been designed to revolutionize refractory placement. This machine can be used for both small refractory installations of 2-3 tons per hour as well as high volume installations of up to 25 tons per hour. The machine features a compact two-stage high-shear primary continuous mixer where the material is hydrated, and a medium shear secondary mixer that is mounted in the receiving hopper of the 4 in. high pressure swing tube pump. While the discharge pressure of the 4 in. pump is an industry leader, the hydraulic pressure to operate the pump is much lower because of oversized differential cylinders. The popular and proven swing out receiving hopper is also a feature of the new pump making it much easier to clean and service. Dust generated in charging the continuous mixer is all but eliminated, and the clean up of the continuous mixer is much quicker and generates very little waste. The efficiency of the two stage mixer and pump with oversized differential allow for the machine to require only 100 H.P. which lowers fuel consumption by 50% when compared to competitive machines. The towing weight of the machine is only 7, 500 pounds.

The Blastcrete Model H 020 is our simple hydraulic rotary gunite machine attachment that is variable speed from 0-5 cubic yards per hour. This machine is equipped with the proven Genuine Piccola single point clamping system and offers precise material output control. The hydraulic requirement is 10 GPM @ 1500 PSI and is universal with any hydraulic power unit with this capacity. Since this is a hydraulic machine, the air requirement is only 225 CFM.

The ChemGrout CG-500/031 High-Capacity Geothermal Series has been designed specifically for grouting geothermal loops. These skid mounted grout plants efficiently mix and pump the high ratio sand/bentonite materials specified by loop designers. The CG-500/031 feature two 70-gallon (265 liters) mixing tanks, a large 45-gallon (170 liter) holding hopper and rugged single-acting 3" piston grout pump. Each mixing tank is equipped with baffles, bag breaker and a variable speed high-efficiency paddle mixer that provides rapid grout mixing. Tank outlets are large slide gates that allow viscous grouting materials to flow quickly into the removable holding hopper. The dual mix tanks alternately feed this large holding hopper providing continuous pumping rates up to 16 gpm. The grout pump is a 3" positive displacement, single acting piston pump that disassembles with only a hammer for fast and thorough cleaning. The rugged steel frame stands up to the toughest conditions on the job site. Operator controls are centrally located for efficient production.

The ChemGrout CG-502 unit is designed for maximum efficiency by allowing simultaneous operation of mixing and pumping with spraying options. It features an open throat size 4 progressive cavity non-pulsating positive displacement rotor-stator pump which gives steady and continuous flow of material. The CG-502 also comes with a single acting variable speed 030 piston pump for higher output. This grout pump handles a wide variety of materials ranging from fluid slurries, to heavily sanded grouts, with simple operation and low maintenance costs. Power options include air, hydraulic, electric hydraulic, gas hydraulic and diesel hydraulic.

The ChemGrout model CG-542 is a skid mounted air powered grout plant. The unit is specially designed with a low profile for grouting rock bolts and cable stays in tight quarters such as tunnels and mines. This system is designed to provide a mixing and pumping continuous operation. This unit features two 22-gallon mixing tanks, a 10-gallon holding hopper and a progressing cavity grout pump. The mixing tanks are equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valves are large slide gates that allow the thickest materials to fall easily into the pump hopper. The holding hopper is equipped with an auger to keep the material thoroughly mixed while waiting to be pumped and in connected directly to the suction of the grout to provide a continuous pumping operation. The grout pump is available in either a 6 stage, size 3, positive displacement, progressing cavity, rotor-stator type that will deliver 3.5 GPM, 522 PSI, or a 3 stage, size 4, positive displacement, progressing cavity, rotor-stator type that will deliver 5 GPM, 261 PSI. The rugged steel frame stands up to the toughest conditions on the job site. Operator controls are centrally located for efficient production. All components are easily accessible for operating, cleaning and maintenance.

The ChemGrout CG-600-3L6 Diesel Hydraulic, heavy duty grout plants for heavy construction projects such as precision post tension grouting, underground mining, tunnels and dams. The ChemGrout CG-600-3L6 Diesel Hydraulic has a 13 cubic foot colloidal mixer which is designed to provide a continuous mixing and pumping operation. It easily mixes and pumps slurries of neat cement, fly ash, bentonite, microfine cements and lime flour. The colloidal mixer is equipped with a centrifugal diffuser type pump rotating at speeds up to 2000 RPM that disperses the cementitous material down to its finest particle size to achieve complete particle wetness. The 3L6 3 stage progressive cavity pump gives output of 20 gpm at maximum pressure of261 psi.

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

VecLoader Spartans are versatile vacuum systems combining exceptional power and filtration with compact size. Spartans are capable of vacuuming most flowable bulk material and liquids in a wide range of industrial vacuum conveying or recovery settings. Modular in design, Spartans are easily matched to a broad assortment of cyclone separators, filter-receivers, collection systems, classifiers, self dumping hoppers and intermediate collection devices. Units are available in electric, diesel and LP power and in skid, crane truck and trailer mounted configurations. The Spartan FM is a heavy-duty/continuous portable (skid-mounted) vacuum loader with an integrated two-yard hopper. With a smaller footprint than the FM, but with comparable power, the compact Spartan II is engineered for flexibility in a wide range of applications and available as L.P, diesel or electric power. The Spartan II is towable by an in-plant vehicle, easily operated by one person and loads into 55 gallons drums. Spartan IIs are often matched to a one or two yd3 self-dumping hopper for added flexibility.