Crushing Machines #4603136

VSI vertical shaft impact crusher (sand making machine) is our crystallization of diligence and wisdom .

Multiple crushing ways meet the needs of different materials crushing.

There is only one pump working in normal use. When the value of the pressure and flow rate do not reach the set value or when the first pump fails the second will open automatically to ensure the normal operation of the host.

Bearing bit thermostat and pump automatic cycle ensure that the temperature inside the bearing cartridge similar to the oil in the tank to prevent the winter freeze.

Hydraulic arm design greatly reduces maintenance costs.

VSI crusher design is based on the principle of mutual crushing and friction in the high-speed movement materials. This type sand making equipment can not only crush stones but also the stones and gravel can be shaped by it. According to feeding method centrifugal impact crusher working form is divided into central feeding and central with cascade feeding; the crush form is divided into rock on rock and rock on iron according to material compressive strength abradability. So the VSI crusher can be divided into four kinds: rock on rock and rock on iron with central feeding rock on rock and rock on iron with central with cascade feeding. Material from the hopper falls into VSI sand crusher and will be divided into two parts. One part passed into high speed rotating wheel to be accelerated and high-speed projectile rapidly impact crushing another part of the material from points around the tray and will be impacted on the vortex branch cavity lining together. Then it will be bounced back to the top of vortex chamberand the movement direction would be changed to start moving down on the diagonal; materials emitters from the impeller form a continuous material curtain. Finally crushed material discharge from the lower discharge port.

• Production capacity : 60-500T / H Note: this is only an average value and the specific value is subject to the clients actual equipment configuration in site.
• Processable Material : Limestone river gravel rocks bluestone cobblestone weathered sand basalt granite quartz diabase etc.
• Range of Application : Non-metallic minerals building materials artificial sand and a variety of metallurgical slag crushing and shaping

VSI vertical shaft impact crusher (sand making machine) is our crystallization of diligence and wisdom . Its integrated design we owe to the technology R&D specialists who personally go to the scene to understand the demand and opinions of equipment operators. By increasing production, reducing wear cost, prolonging maintenance cycle, thus we developed this multi-purpose crusher which has a couple ways of feeding and crushing modes, making it become the preferred device in the fields of stone integer, artificial sand, refractory, ball mill feeding, industrial construction materials processing and so on.

PCL sand making machine is of high-power and low-consumption which is designed depending on several years hard work and study of mechanical mining equipment.

Unique Lining significantly decreases wear parts cost and maintenance workload. During the process the stone rock can form a protective bottom layer which makes the equipment more durable.

Adopting high-quality wear-resistant materials at home and abroad leads to long service life. Hard wear-resistant material small volume light weight easy to replace.

Bearing special installation and advanced spindle design with characteristics of heavy load and high speed rotation without any problem in fine crushing and coarse grinding.

Final products are cubic shape high density and low iron pollution and can be used as stone shaping machine.

Material from the hopper falls into sand crusher and will be divided into two parts by the distributor. One part falling into the high-speed rotation impeller through the middle and accelerated rapidly within the impeller. That acceleration can be up to several hundred times the acceleration of gravity then projecting out from three uniform impeller flow channel at speed of 60-70 m / s; another part of the material falls freely from all around the feeder impact on the vortex branch cavity lining and then will be bounced back to the top of vortex chamber the movement direction would be changed to start moving down on the diagonal; materials emitters from the impeller form a continuous material curtain. Thus materials will be hit rubbed and grinded twice or several times in whirl crushing cavity. Finally crushed materials discharge from the lower discharge port. Throughout the crushing processmaterials impact and crush each other not in direct impact on the metal element but only shock rub and grind the lining thus prolonging mechanical life.

• Production capacity : 10-500T/h Note: this is only an average value and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material : Limestone river pebble rocks bluestone cobblestone weathered sand basalt granite quartz diabase.
• Range of Application : mine cement fire-proof materials bauxite corundum glass raw material building sand stone materials and other metallurgy slag.

PCL sand making machine is of high-power and low-consumption, which is designed depending on several years hard work and study of mechanical mining equipment. This type sand maker absorbed the advanced technology of the same products of Barmac Company of America, and now is of the international level. It plays an important role in crushing minerals into pieces. Since the sand processing machine was put into production in 2001, EMCC has achieved good market share in domestic market, and product performance is tending toward best perfection, deeply trusted by customers. PCL sand making machine, namely Vertical Shaft Impact Crusher, is widely used in all kinds of mineral, cement, corhart, carborundum grain, glass raw material, machine making construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and materials with features of very hardness and anticorrosion. And this and making equipment is more productive than other kind of sand&stone crushers.

Details

The mobile construction waste crushing plant uses the advanced construction waste disposal technology and is developed for processing construction waste, industrial waste, coal cinder, coal rock, slag, fly ash, and other nonmetallic solid wastes.

Advantage High Quality Thick Steel frame Structure

High quality thick steel frame structure makes mobile crushing plant run smoothly extending equipments service life.

Eddy Impact Crusher Special Crusher for Construction Waste

Professional construction waste crushing equipment sets coarse and fine crushing together bigger feeding granularitymore input material and greater capacity.

Truck Mounted Separators

The mobile crushing station is configured with a dedicated separator for removing iron materials to improve the quality of finished material products extended equipment life.

Scalable Regulation Stand

The stent body can be easily retractable according to ground level to ensure stable operation of the vehicle when running thus prolonging equipment life.

Product introduction

• Production capacity : 10-250T / H Note: this is only an average number and the specific is subject to the clients actual equipment configuration in site.
• Processable Material : Construction waste industrial waste cinder coal rock slag fly ash building materials.
• Range of Application : Mobile type Non-metallic Solid Waste Reprocessing

he mobile construction waste crushing plant uses the advanced construction waste disposal technology and is developed for processing construction waste, industrial waste, coal cinder, coal rock, slag, fly ash, and other nonmetallic solid wastes. After the application process of these solid waste treatments, mobile crushing plant can produce a variety of new building materials which meet the quality test specification. According to the different device configuration, the effective utilization of construction waste can reach 80-100%. Using this device doesnt cause secondary pollution so this can achieve ideal enviromentaleffects of near-zero pollution and zero emissions.

The jaw crusher series mobile crushing machine is a new type rock crushing equipment which can greatly expand the concept of mobile crushing processing areas.

The vehicle-mounted jaw crusher of EMCC is an efficient and versatile device which concentrated research and development according to the operating environment of mobile crushing plant and experience of stone processing in site.

High quality thick steel frame structure makes mobile crushing plant run smoothly extending equipments service life.

Professional designed new type feeder which can uniformly convey bulk materials for primary and secondary crusher.

The stent body can be easily retractable according to the different ground level to ensure stable operation of the vehicle when running thus prolonging equipment life.

The jaw crusher series mobile crushing machine is a new type rock crushing equipment, which can greatly expand the concept of mobile crushing processing areas. Its purpose of design idea stands in customers position, putting eliminating obstacles about the limitation of crushing space and environmental pollution as the primary solution. Truly provide customers with simple, efficient and cost-effective operation hardware facilities of projects. With large crushing ratio, the strong crushing pioneer-Jaw crusher type mobile crushing station is well fit for construction waste crushing and other mining region.

• Production capacity : 16-400T / H Note: this is only an average value and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material : Limestone granite marble basalt iron ore river stone shale bluestone coal cobblestone construction waste etc.
• Range of Application : Mining smelting building material highway railway water conservancy chemical industry and other industries

The jaw crusher series mobile crushing machine is a new type rock crushing equipment, which can greatly expand the concept of mobile crushing processing areas. Its purpose of design idea stands in customers position, putting eliminating obstacles about the limitation of crushing space and environmental pollution as the primary solution. Truly provide customers with simple, efficient and cost-effective operation hardware facilities of projects. With large crushing ratio, the strong crushing pioneer-Jaw crusher type mobile crushing station is well fit for construction waste crushing and other mining region.

The impact crusher series mobile crusher machine is suitable for construction waste crushing, mobile crushing operations in mining area, also widely used in water and electricity, highway, artificial aggregate, ore crushing and other operations.

Reinforced impact crusher double and three cavity impact crushers all can be freely set from coarse crushing to fine crushing in accordance with the different processing requirements.

Retractable self-load belt conveyor.

High quality thick steel frame structure makes mobile crushing plant run smoothly extending equipments service life.

Vehicle-mounted electronic control configuration space-saving easy manipulation.

• Production capacity : 16-400T / H Note: this is only an average value and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material : Limestone granite marble basalt iron ore river stone shale bluestone coal cobblestone construction waste etc.
• Range of Application : Mining smelting building material highway railway water conservancy chemical industry and other industries.

The impact crusher series mobile crusher machine is suitable for construction waste crushing, mobile crushing operations in mining area, also widely used in water and electricity, highway, artificial aggregate, ore crushing and other operations. It is a new type of rock crushing equipment, which can greatly expand the concept of coarse and fine crushing areas. Its purpose of design idea stands in customers position, putting eliminating obstacles about the limitation of crushing space and environmental pollution as the primary solution. Truly provide customers with simple, efficient and cost-effective operation hardware facilities of projects.

Combined Mobile Cone Crusher Plant is an integration of new type energy-saving efficient crusher in the international advanced level. Modular design excellent combination intelligent wireless operation low cost and efficient operation.

High Quality Thick Steel frame StructureHigh quality thick steel frame structure makes mobile crushing plant run smoothly and extends equipments service life.

Retractable Self-load Belt Conveyor.

Professional designed new type feeder which can uniformly convey bulk materials for primary and secondary crusher.

The stent body can be easily retractable according to ground level to ensure stable operation of the vehicle when running thus prolonging equipment life.

• Production capacity : 50-300T / H Note: this is only an average value and the specific is subject to the clients actual equipment configuration in site.
• Processable Material : Limestone granite marble basalt iron ore river pebble shale bluestone coal cobblestone construction waste
• Range of Application : Widely used in stone rocks and construction waste crushing & screening of road and bridge construction buildings metallurgy energy facility and other areas.

Combined Mobile Cone Crusher Plant is an integration of new type energy-saving, efficient crusher in the international advanced level. Modular design, excellent combination, intelligent wireless operation, low cost and efficient operation. We put the site design, environmental protection, easy to transport, and saving energy as the primary problem to be resolved, providing customers with the best technology of crushing solution. With high performance, high reliability and attractive appearance, the series of M3Y/M3S Combined Mobile Cone Crushing Plants has reached the international advanced level.

The combined mobile impact crusher station is an extraordinary economical and practical device which is suitable for medium and small scale stone crushing production line.

High Quality Thick Steel frame StructureHigh quality thick steel frame structure makes mobile crushing plant run smoothly and extends equipments service life.

Vehicle-mounted electronic control configuration space-saving easy manipulation.

The stent body can be easily retractable according to the different ground level to ensure stable operation of the vehicle when running thus prolonging equipment life.

A truck can be equipped with a multiple crushing line according to the production requirements.

• Production capacity : 35-140T / H Note: this is only an average value and the specific value is subject to the clients actual equipment configuration in site.
• Processable Material : Limestone granite marble basalt iron ore river stone shale bluestone coal cobblestone construction waste etc.
• Range of Application : This type of mobile crusher is widely used in construction waste crushing plant mining mobile crushing and processing suitable for crushing all kinds of ores and rocks above medium hardness .

The combined mobile impact crusher station is an extraordinary economical and practical device, which is suitable for medium and small scale stone crushing production line. It has unique advantages of diverse integrated and fully automatic, self-load conveyor screening equipment, and also can be configured as primary, secondary and tertiary crushing line according on the customers diverse production requirements and optimize the configuration combinations.

PCZ series hammer crusher is a new type of stone crusher based on PC series. In accordance with feedback from our clients and mining industry development trend, we took the experimental data from stone crushing test base into account, and PCZ series hammer crusher has been launched by EMCC.

Big feed port high crushing cavity adaptable material with high hardness and big size finished product with less stone powder.

Adopt high manganese steel high-chromium iron high abrasive resistance.

After optimization design grid section control of final product size has been changed hammer head abrasion has been reduced and service life of hammer head has been lengthened by 4-6 times. Now it is of higher efficiency and more energy conservation.

Big input size and small output size. Multiple stage crushing is changed into single stage crushing low cost operation could be achieved and 35% of costs is reduced. PCZ heavy hammer crusher is a machine of low energy consumption and low cost.

Motor drives rotor rotating in the crushing cavity material will be taken into machine by feeding port and material will be impacted sheared and hit by moving hammer. There is sieve plate under the rotor standard size material will be discharged by sieve plate but coarse sand will stay on the sieve plate to be hit and grinded and finally be discharged out of the machine.

• Production capacity : 100-500T/H
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction waste
• Range of Application : It is applied to materials with medium hardness in industrial sector such as dressing plant refractory plant cement plant glass plant for fine processing.

PCZ series hammer crusher is a new type of stone crusher based on PC series. In accordance with feedback from our clients and mining industry development trend, we took the experimental data from stone crushing test base into account, and PCZ series hammer crusher has been launched by EMCC. Compared with other hammer crushers, it has many advantages such as lager diameter of hammer pin, heavier hammer head and higher speed of linear velocity. The difficulties such as serious abrasion of hammer and easily broken hammer pin have been overcame. PCZ hammer crusher has big feed size and high crushing ratio, and otherwise, it costs lower in maintenance than traditional types. All these characteristics make it be the first choice in crushing industry.

DPC series single-stage impact hammer crusher is one of the leading products in our company which is widely used to crush limestone stones with medium hardness compressive strength under 200 Mpa and calcium content higher than 40%.

Big feed port makes high charging rate.

Rear cover could be opened by hydraulic traction bar easy to change impact plate and easy to maintain.

When machine shut down service condition could be observed.

Single stage and high capacity.

DPC series single-stage impact hammer crusher is composed of rotor bearing part discharge dandruff comb strike plate and shell. Hammer of the crusher strikes ore stone ore stone hits impact plate and ore stone impacts each other these are the principle of single stage hammer crusher. Ore stone is fed to feed port by feeder then it will fall into crushing cavity where there are two relative rotating rotors and impacted by hammer to get preliminary crushing. Material will be secondly crushed by rotor and impact plate in the process of falling down then shunted by strike plate to go two mutual symmetry discharge area finally standard material will be discharged by bottom of the machine.

• Production capacity : 70-1000T/H Notice: this capacity is mean value and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction waste
• Range of Application : Stone crushing in building materials industry highway and railway construction housing and other industries.

DPC series single-stage impact hammer crusher is one of the leading products in our company, which is widely used to crush limestone, stones with medium hardness, compressive strength under 200 Mpa and calcium content higher than 40%. It can crush the big size ore to the small size ones which can be directly fed to the grinding mill, thus replace the traditional two-stage crushing, simplify the process, save infrastructure investment and production cost.

The cone crusher type mobile crusher machine has the characteristics of large capacity high efficiency fine crushing adaptable integrated crushing and screening with self-contained conveyor.

High Quality Cone CrusherThe crushing plant can be equipped with Simmons cone crusher spring cone crusher and hydraulic cone crusher as needed.

Integrated design of sieve and uniform feeding greatly improves production reduces equipment wear and tear and extends equipment life.

Vehicle-mounted electronic control configuration space-saving easy manipulation.

The stent body can be easily retractable according to the different ground level to ensure stable operation of the vehicle when running thus prolonging equipment life.

• Production capacity : 50-160T / H Note: this is only an average value and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material : Limestone granite marble basalt iron ore river stone shale bluestone coal cobblestone construction waste etc.
• Range of Application : Mining smelting building material highway railway water conservancy chemical industry and other industries

Hammer crusher is widely applied in dressing plant refractory plant cement plant glass plant and other industry plants to fine grind medium hardness material. Dry and wet types crushing are available.

Big feed port could make higher charging rate.

High manganese steel and high-chromium iron are adopted good abrasive resistance of machine.

Unique flywheel design reduces the shock of machine to guarantee stable operation.

In the same situation of power it saves 30% of energy than other machine.

Hammer crushers key part is the rotor with hammer. Rotor is composed of principal axis disk pin roll and hammer. Motor drives rotor rotating in the crushing cavity material will be taken into machine by feeding port and material will be impacted sheared and hit by moving hammer. There is sieve plate under the rotor standard size material will be discharged by sieve plate but coarse sand will stay on the sieve plate to be hit and grinded and finally be discharged out of the machine.

• Production capacity : 5-70T/H Notice: this capacity is mean value and the specific production capacity is subject to clientsactual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material

Hammer crusher is widely applied in dressing plant, refractory plant, cement plant, glass plant and other industry plants to fine grind medium hardness material. Dry and wet types crushing are available. Wet type means material is watered to be crushed; dry type means that material must be dry. Hammer crusher has many advantages like big crushing radio (10-25 generally, max 50), high production capacity, uniform final product, low energy consumption, simple mechanism, low weight, and convenience for maintenance.

PFS Impact Crusher a new type impact crusher developed by EMCC on the base of foreign technology and the latest processing technology has the following advantages compared with general impact crusher.

Adopting full-automatic hydraulic adjuster beteween rotor and impact plate enable flexibly discharging size adjustment.

Adopting bigger specification bearing with stronger bearing capacity.Bearing pedestal adopts overall forging steelwhich can perfectly fit the crusher frame and increase the radial force of bearing pedestal

Heavy rotor design is more durable bigger crushing force. Strict quality control high stability longer service life.

Hydraulic top device and maintenance lifting design can achieve the change of board hammer and other wearing parts in a short time.

This machine uses impact energy to crush the raw material. When the material comes to zone of action of hammer plate material will be pushed to impact device to be crushed under the force of impact then the material will bounce back to zone of action to be re-crushed this process would not stop until the final products become to required size the material will be discharged from bottom of machine. Adjusting the gap between impact rack and rotor rack could change the output size and shape of material.

• Production capacity : 100-600T/H
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material
• Range of Application : white fuel expressway artificial sand ore crushing industriesetc.

PFS Impact Crusher, a new type impact crusher developed by EMCC on the base of foreign technology and the latest processing technology, has the following advantages compared with general impact crusher. 1. Adopting, hydraulic top device and maintenance lifting design can achieve the change of board hammer and other wearing parts in a short time, which reduce halt and maintenance time and cost of maintenance. 2. Adopting full-automatic hydraulic adjuster beteween rotor and impact plate enable flexibly discharging size adjustment. 3. Adopting heavy-duty rotor welded from high quality steel plate (according thicken the web of rotor block and heighten board hammer up to rotor body to change the combining form beteween board hammer and rotor spindle, and then increasing the weight of the rotor), enable its owns greater rotatory inertia. That means, with the same rotate speed, it has stronger crushing force, high efficiency. 4. Adopting bigger specification bearing with stronger bearing capacity. 5. Bearing pedestal adopts overall forging steel, which can perfectly fit the crusher frame and increase the radial force of bearing pedestal; Excellent waterproof and dustproof effect can protect the bearing. 6. Adopting wedge to fix the plate hammer, ensure roller to be firm under high-speed rotation. Reliable work, convenient changing. 7. Plate hammer adopts crescent, which can ensure the material to crush vertically with great impact strength, high crushing efficiency. It has a bigger impact face than linear type plate hammer, more durable.

Reinforced Impact Crusher is designed with the latest international technology and the world-class manufacturing process. Selection of its main components adopt the most high-end materials.

Adjusting device is optimized easy to adjust. protective device is adjusted and security of the machine is increased.

Keyless connection easy to maintain high abrasion resistance big impact. Unique plate hammer fixation device makes maintain and disassembly easier.

Entirety bearing pedestal cast steel structure can match up with rack. radial strength of bearing pedestal is increased. High bearing capacity makes machine firmand low maintenance ratio.

Heavy rotor design is more durable bigger crushing force. Strict quality control high stability longer service life.

This machine uses impact energy to crush the raw material. When the material comes to zone of action of hammer plate material will be pushed to impact device to be crushed under the force of impact then the material will bounce back to zone of action to be re-crushed this process would not stop until the final products become to required size the material will be discharged from bottom of machine. Adjusting the gap between impact rack and rotor rack could change the output size and shape of material.

• Production capacity : 70-400T/H Notice: this capacity is mean value and the specific production capacity would be subjected to actual equipment configuration of clients.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material.
• Range of Application : white fuel expressway artificial sand ore crushing industriesetc.

Reinforced Impact Crusher is designed with the latest international technology and the world-class manufacturing process. Selection of its main components adopt the most high-end materials. Heavy-duty rotor design and rigorous tests to ensure high quality of the rotor. Rotor is the heart of crusher as well the strict part in the operation, and plays a vital role in the device operation. Therefore EMCC develops and produces the heavy duty rotor to obtain higher rotational inertia. High wear-resisting material and the best crushing cavity make the excellent crushing performance.

Impact crusher is the most advanced crushing machine combining domestic stonesand industry specific situation and it absorbs latest technology. Impact crusher is widely applied in mining, railroad, highway, energy, cement, chemecal, construction industries.

Keyless connection makes maintenance easier and economical; machine has strong shock resistance and abrasion resistance and strong impact.

Big feed port high crushing cavity high resistance againest material less stone powder generated.

All function of crushing high capacity machine element gets less abrasion high comprehensive benefits.

Compact structure strong rigidity high rotational inertia of rotor.

This crusher uses impact force to crush the raw material. When the material comes to zone of action of hammer plate material will be pushed to impact device to be crushed under the force of impact then the material will bounce back to zone of action to be re-crushed this process would not stop until the final products become to required size the material will be discharged from bottom of machine. Adjusting the gap between impact rack and rotor rack could change the output size and shape of material.

• Production capacity : 25-300T/H Notice: this capacity is mean value and the specific production capacity is subject to clientsactual equipment configurati
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction waste.
• Range of Application : mining metallurgy constrction material highway railway water conservancy and chemical engineering industry.

Impact crusher is the most advanced crushing machine combining domestic stone&sand industry specific situation, and it absorbs latest technology. It adopts advanced production technique and unique structure design, final product shape would be cube, max input size of material should be 500mm, compressive strength should be less than 350MPa, all kinds of coarse, medium, and fine size material(granite, limestone and concrete) could be processed. Impact crusher is widely applied in mining, railroad, highway, energy, cement, chemecal, construction industries. Final size of material could be adjusted, double chamber and triple chamber types are available, unique structure adopt keyless connection, high chrome hammer, and special impact plate; crushing process is simplified, makeing it more energy-efficient; Cube final product shape, and adjustable discharge size.

The electromotor leads the eccentric sleeve to rotate by the V-belt drive shaft and drive gear.

The electromotor leads the eccentric sleeve to rotate by the V-belt drive shaft and drive gear. The movable cone does rotary and pendulum movement under the leading role of eccentric sleeve which makes the movable cone and fixed cone close and far away from time to time. The raw material is crushed in the crusher chamber by squeezing and striking continuously. The crushed stone discharges from the bottom.

• Production capacity : 70-800T/H Notice: this capacity is mean value and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material
• Range of Application : metallurgy construction white fuel transportation chemical engineering construction material

The single cylinder hydraulic cone crusher is applicable to mineral fine grinding and ultra fine grinding. This series of crushers are divided into PYB, PYZ, PYD, respectively used in coarse crushing, secondary crushing, and fine crushing. It is easy for crushing the material to the required size range, and meets the production needs of customers.

Modular Series Jaw Crusher is the best choice for hard rock crushing process fission structure makes installing and debugging work easier it can shows its superiority in the pit.

High manganese steel material and metallography detection make close connection of moving jaw and connecting plate efficiency is increased.

Feed channel leads material to crushing cavity and no need to remove it when changing toothed plate.

Flywheel and V-belt shield besel of besel could be the way to observe the situation of Flywheel and belt pulley.

Free welding rack design lengthens machines service life. Parts of machine could be splited transportation and installation costs can be reduced.

Motor drives belt and belt pulley to make moving jaw swing to every direction when moving jaw pushes dynamic jaw plate moving toward fixed jaw plate material will be crushed; when moving jaw moves backwards crushed material will be discharged from discharge gate. With seasonal crushing and discharging volume production could be achieved.

• Production capacity : 50-600T/H Notice: this capacity is mean value the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction waste.
• Range of Application : metallurgy mining chemical cement construction refractory materials ceramic industry all kinds of ore and rock with medium hardness medium and fine crushing process.

Modular Series Jaw Crusher is the best choice for hard rock crushing process, fission structure makes installing and debugging work easier, it can shows its superiority in the pit. High speed crushing techniques application makes high capacity and strong power and big crushing ratio. Reasonable shock absorption protects machines

Reinforced jaw crusher is most suitable for crushing compressive strength material hardness not higher than 280 Mpa:ore rock slag etc. and the most large degree materials must not be more than technical parameter table set rules.

Deep cavity V type structure makes higher capacity (compared with normal jaw crusher) and bigger input size of material.

Pull rod protective device can protect machine from damage load bearing of jaw head is increased machine is more effective and safer service life of bearing and principal axis are lengthened.

New design of discharge gate adjusting device convenient quick and safe. compact structure and unique design.

New oil-way design matches up with oil pump; easy to handle and maintain.

Reinforced jaw crusher main parts: main frame partiality axis rotation part crushing cavity working part insurance device and discharging mouth adjusting devices components.1. frame part: the board former box back box welding components etc.2. Eccentric shaft rotational part: mainly by dynamic jaw eccentric shaft bearing housing pulley etc. Which is the main part of the power transmission.3. Crushing cavity working part: mainly composed of fixed jaw plate dynamic jaw plate side lining board guard board and other components which are working parts of crushing materials.

• Production capacity : 10-600T/H Notice: this capacity is mean value and the specific production capacity would be subjected to actual equipment configuration of clients.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material.
• Range of Application : metallurgy mining chemical cement construction refractory materials ceramic industry all kinds of ore and rock with medium hardness medium and fine crushing process.

Reinforced jaw crusher is most suitable for crushing compressive strength material hardness not higher than 280 Mpa:ore, rock, slag, etc., and the most large degree materials must not be more than technical parameter table set rules. JC jaw crusher with its superior performance and stable and reliable quality, has won the trust of customers who pursue high quality equipments. It is the first choice of high efficiency and crushing equipment.

Jaw crusher is a type of effective and energy conservation crushing machinery. Medium and large scale jaw crusher is main product of EMCC, and we have reached international level on designing and producing large scale crusher.

Unique jaw head structure and perfect seal lengthen bearings service life.Unique flywheel design reduces the shock of machine to guarantee stable operation.

Spacer type discharge port adjustment device is very reliable wide range of adjusting flexibility of the machine is increased.

Deep crushing cavity no dead corner. Input size range and capacity are increased; big crushing radio even final product new oil-way design can match up with oil pump easier and effective operation.

Adopting mono-block cast and and new assembly technology could make it match up with rack perfectly radial strength is increased.

Motor drives eccentric shaft rotating by belt pulley moving jaw is forced to move to or leave from fixed jaw material will be squeezed twisted and been grinding material will be crushed to smaller size and final product will fall down and discharged from discharge port.

• Production capacity : 1-500T/H Notice: this capacity is mean value and the specific production capacity is subject to clientsactual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material.
• Range of Application : mining metallurgy constrction material highway railway water conservancy chemical engineering industry.

Jaw crusher is a type of effective and energy conservation crushing machinery. Medium and large scale jaw crusher is main product of EMCC, and we have reached international level on designing and producing large scale crusher. Jaw crusher is main applied in all kinds of ore and big block material medium size crushing, materials hardness should be less than 320Mpa, coarse crushing and fine crushing are available. This series has a complete range of specifications, feeding size could be 125mm750mm, its the first choice of primary crushing. Jaw crusher could be widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industries.