Other Products / Services #4603136

This pellet mill can process agriculture and forestry processing wastes such as sawdust, straw, rice husk and bark into high density pellet fuel. The biomass pellet is ideal alternative fuel of coal and oil, which both saves energy and reduces soot emissions.

1.Available raw material: woodiness, straw, peanut shell, palm nut, coconut shell, cotton seed, bamboo dust, elephant grass, sugar cane, pulp, olive slag, organic manure and so on.2.The main drive system uses high-precision gear revolve, it improves the production of 15%-20%.3.The drive part of the machine uses high quality bearings which are all imported. They all made the machine effective , steady and environmental.4.The lubrication system made all bearings work well.5.The machine adopts a system of conversion speed-adjustable feeding and axial steam spraying, external discharging and overload protection.

• Production capacity : 0.5-4t/h
• Processable Material : woodiness, straw, peanut shell, palm nut, coconut shell, cotton seed, bamboo dust, elephant grass, sugar cane, pulp, olive slag, organic manure and so on.

This pellet mill can process agriculture and forestry processing wastes such as sawdust, straw, rice husk and bark into high density pellet fuel. The biomass pellet is ideal alternative fuel of coal and oil, which both saves energy and reduces soot emissions. Whats more, the biomass pellet is high effective and clean renewable energy. Biomass pellet machine is divided into flat die pellet mill and ring die pellet mill.

Biomass falls into the mill vertically from feed inlet, then evenly and continuously distributed in the mold inner cavity surface (the pressing roller and mold contact surface) and then the powdery material gets through the holes that evenly distributed in the mold under the pressure of pressing wheels. In this process, the material has physical change or appropriate chemical change under high pressure and high temperature (according to material), prompting the powdery materials forming into ever-lengthening solid cylinders which then cut off by the cutting knife, and at last pellets discharged from the discharge hole.

The roadheader equips large span cutting boom and small diameter cutting head which makes it work for a large cross section and have stronger rock breaking capacity.

Double layout, increase the installation and maintenance of space, the weight distribution is balanced, stable center of gravity.

The automatic cable drum and multi degree of freedom overcast cooperate to pick and lay cables automatically when the roadheader is walking.Instead of manual operation, the automatic cable drum can protect cables , ensure excavation and supporting synchronous and improve construction efficiency.

Spraying system adopts Venturi spray nozzles, which makes the roadheader have high water pressure and good effect, at the same time, dust fan is equipped on the machine, all these provide a good environment for the tunnel construction.

The machine uses much intelligent control technologies, such as remote control, leakage detection, failure warning, security protection etc.The use of international famous hydraulic, electrical components and humanized design make it safe and reliable to operate.

The large span cutting boom makes cutting height reach 7.1 meters, and the machine is acceptable for railway, highway tunnel which have large cross section.

The cutting head has small diameter and picks on it adopt single helix arrangement, all these optimizate the arrangement of picks and cutting angle. It makes the machine has better cutting effect and stronger rock breaking capacity.

The automatic cable drum and multi degree of freedom overcast cooperate to pick and lay cables automatically when the roadheader is walking.Instead of manual operation, the automatic cable drum can protect cables , ensure excavation and supporting synchronous and improve construction efficiency.

The machine uses much intelligent control technologies, such as remote control, leakage detection, failure warning, security protection etc.The use of international famous hydraulic, electrical components and humanized design make it safe and reliable to operate.

Travel mechanism with drive roller and guide roller adopts wide crawler shoes, which reduces the floor pressure and makes the machine adapt to different foundation.

Detachable turret mechanism makes the machine convenient for disassembly and maintenance.

The disk granulator is a kind of equipment for fertilizer, mainly used for fertilizer processing in different ways. Processed by the granulator particles are the same size.

simple structure, high efficiency granulation, reliable performance, easy operation and long service life, among others.

• Production capacity :500 microns to 20 mm
• Processable Material :fertilizer
• Range of Application :fertilizer processing in different ways

The disk granulator is a kind of equipment for fertilizer, mainly used for fertilizer processing in different ways. Processed by the granulator particles are the same size. Features include disk granulator a simple structure, high efficiency granulation, reliable performance, easy operation and long service life, among others.

EMCC Pelletizers Discs are the teams to choose when you need to convert dusty materials into spherical particles of 500 microns to 20 mm in diameter and easy to obtain uniformity and process control. Size of the pellet based on the angle of the disk speed and feed liquid are easily controllable because operational flexibility EMCC disk pelletizer.

Gas gets into the scrubber tangentially through the bottom air intake, under the action of the fan, quickly filled the air intake segment space, and then flow evenly through uniform flow section up to the first stage feeding absorption section.

Small resistance, low consumption, low noise, high purification efficiency, compact structure, small cover space, good corrosion resistance and aging resistance, light weight.

• Production capacity :300-1330mm
• Processable Material :Treatment of all kinds of harmful gases

Gas gets into the scrubber tangentially through the bottom air intake, under the action of the fan, quickly filled the air intake segment space, and then flow evenly through uniform flow section up to the first stage feeding absorption section. On the surface of the filler, the pollutants in gas phase react with the liquid phase substance. The reaction resultant (mostly soluble salts) flowing into the lower portion of the reservoir with the absorption liquid. The gas not completely absorbed continues rises into the spray section. The absorption liquid sprays in high-speed through the uniformly distributed nozzle in the ejection segments, generating numerous small droplets continue react with the gas. This treatment can cool the exhaust gas to remove particles and other impurities. The tower uppermost segment is for defogging, and the absorbing liquid droplets carried by gas are cleared here. The treated clean air is blown into the atmosphere through the upper end of the scrubber.

Gas gets into the scrubber tangentially through the bottom air intake, under the action of the fan, quickly filled the air intake segment space, and then flow evenly through uniform flow section up to the first stage feeding absorption section. On the surface of the filler, the pollutants in gas phase react with the liquid phase substance. The reaction resultant (mostly soluble salts) flowing into the lower portion of the reservoir with the absorption liquid. The gas not completely absorbed continues rises into the spray section. The absorption liquid sprays in high-speed through the uniformly distributed nozzle in the ejection segments, generating numerous small droplets continue react with the gas. This treatment can cool the exhaust gas to remove particles and other impurities. The tower uppermost segment is for defogging, and the absorbing liquid droplets carried by gas are cleared here. The treated clean air is blown into the atmosphere through the upper end of the scrubber.

The Scrubber has A, B and C three models. A model is wet scrubber. B model is acid and alkaline gases scrubber. C model is organic gases and heat gases scrubber.

Details

Counter-flow cooler is newly developed and most advanced pellet cooling equipment. It is mainly used for high temperature pellets cooling after granulation.

Advantage

Product introduction

• Production capacity :5-30 t/h

Counter-flow cooler is newly developed and most advanced pellet cooling equipment. It is mainly used for high temperature pellets cooling after granulation.

Working principle

The pellets discharged from the pellet mill are of high temperature and moisture. They are fed by a closed air feeder at the top of the cooler. Then the rotating distribution structure disperses the feed evenly in the cooling cabinet. The air blower sucks hot air from the top feed part, while the cold air enters the cooler from the bottom in all directions and pierce into the feed vertically to take away the heat and moisture. Cooling air reverse the pellets and the pellet is cooled from the bottom to top gradually, thus the cooling time is increased, which does good to the production of high quality pellets and to extend the time of pellets storage. Cooling time is controlled by material upper and lower level. When material reaching upper level, the motor is turn on, beginning discharging. But when material lower than lower level, the motor is stopped, stopping discharging. To avoid overflow, the cooler has been provided with an overflow sensor, which stops feeding to the cooler.

The pendulum counter-flow cooler is composed of a closed air feeder, air exhaust header, upper and lower feeders, hydraulic controlling system, pendulum flap discharging system and air sucking system, etc.

Drum chipper is specialized equipment for high-quality biomass sheet processing, which is applied to all paper mills, particle board plants, fiber plants and wood chip production base, wood chip export base.

1. Available raw material:Wood logs, branches and twigs with moisture more than 15%.
2. Sperical material blade, with high strength and anti-abrasion. Free of any professional tool sharpener, low maintenance cost.
3. Knife roll is wholistic processing and is undertaken dynamic balance test to improve accuracy and stable operation. It can process larger diameter wood with its special structure.
4. Low power consumption, with is 20-30% lower than similar product in market.
5. Feeding system consists of feeding and squeezing parts: Squeezing part is automatic controlled by hydraulic system; PLC controls the whole feeding system to guarantee the smooth feeding.
6. Forging dead plate, with high strength and long service time.

• Production capacity :4-70 m3/h
• Range of Application :Wood logs, branches and twigs with moisture more than 15%.

Drum chipper is specialized equipment for high-quality biomass sheet processing, which is applied to all paper mills, particle board plants, fiber plants and wood chip production base, wood chip export base. The slicer can cut logs, small diameter wood and other material into high-quality industrial wood chips with uniform length and thickness and flat cut. It can also cut branches, plates, etc.

The slicer can cut logs, wood branches, slab, waste veneer, bamboo, cotton stalks and other non-wood fiber stalks into certain specification sheet material, which can be material of particleboard, fiberboard, non-wood-based board and paper. It has advantages such as advanced structure and high quality sliced product, strong materials adaptability and easy operation and maintenance. This machine is composed of base, blade roll, upper and lower feed rollers, conveyor belts, hydraulic system and other components. The welded base that made of high strength steel is support of the whole machine. Two fly knives are fixed onto the blade roll by specially manufactured fly knives and pressure blocks. According to different raw material thicknesses, the upper feeding assembly can up and down within certain range by means of hydraulic system. Qualified flakes falling down through the mesh sieve and large flakes will be re-cut in the machine.

Multilevel classifier is new type classifier designed by our company. We referenced foreign advanced experience to develop classifier independently.

Original vertical type impeller is adopted to classify the final product avoiding coarse material in final product uniform product size high accuracy of classification.

It could match up with all kinds of grinding mill (ball mill Raymond mill and high pressure mill) to constitute closed circuit or open circuit line.

It could produce 1-6 size of products at the same time.

Professional automatic control device is adopted automatic and reasonable control.

• Production capacity :0.1-10T/H Note: This is a mean value capacity and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material :Limestone calcite fly ash Calcium carbide desulfurization kaolin calcium carbonate coal gangue gypsum water granulated slag fine slag powder coal dust bentonite barite marble talc refractory material.
• Range of Application :High hardness material non-metal ores chemical food drug metallic material industries and so on.

Multilevel classifier is new type classifier designed by our company. We referenced foreign advanced experience to develop classifier independently. Its a perfect combination of shunt inertial classification, centrifugal classification, core technology has reached international level, and it has a better technology performance than turbine classifier does.

High degree of automation

Self lighting type permanent magnet separators is constituted by Nd-fe-b magnetic core, de-iron belt, shell frame, roller and other parts, matching up with many kinds of conveyor

High efficiency neodymium iron boron with strong magnetism and its hard to be demagnetized.

Rollers in both sides adopts drum shape structure possessing rectifying deviation function.

Good leakproofness makes machine can adapt all kinds of severe environment condition.

The control section could be linked with belt conveyor manual control and centralized control two methods are available.

• Production capacity :tape speed 4.5m/s Note: This is a mean value and the specific is subject to the clients actual equipment configuration in site.
• Processable Material :Material mixed with scrap iron
• Range of Application :iron removal protecting machinery from damage of scrap iron lengthening service life of machinery.

Self lighting type permanent magnet separators is constituted by Nd-fe-b magnetic core, de-iron belt, shell frame, roller and other parts, matching up with many kinds of conveyor, it is applied for removing ferromagnetic substance from non-magnetic materials, permanent magnet separators is set in the de-iron production line.

When the material flows through the separator the ferromagnetic materials are adsorbed to the stainless steel pipe wall and gradually move with the permanent magnet and slide to the tap hole thus realize the material separation. At the tap hole the permanent magnet move away along the cycling direction the ferromagnetic material that loses magnetic attraction discharge from the tap hole under the gravity force therefore achieve the automatic removal of iron materials.

Details

Pulse bag dust catcher is high efficiency energy saving machinery designed by our researcher after several years mining crushing and grinding dedusting and ore powder collecting experience, it can adapted strict dust discharging standard domestic and overseas.

Advantage

Being applied in grinding mill production line

In powder making process dust catcher can filter air collect dust and reduce air pollution

Automation Control

Automation Control device is set to achieve automatic and reasonable control

Can be used in conjunction with the sand production line

Matching up with sand and stone production line collecting dust and reducing air pollution

Matching up with ball mill beneficiation production line

Filtering air collecting dust and reducing air pollution in ball mill powder making beneficiation production line.

Product introduction

• Production capacity :matching up with grinding mill:0.6-35T/H matching up with crusher:12-600T/H Note: This is a mean value capacity and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material :Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application :Grinding mill production line ball mill powder making production line sand and stone production line Purifying air collecting dust reducing air pollution.

Pulse bag dust catcher is high efficiency energy saving machinery designed by our researcher after several years mining crushing and grinding dedusting and ore powder collecting experience, it can adapted strict dust discharging standard domestic and overseas.

Working principle

Dust-laden air through the inlet into the next ash bucket by fan powered then speed dips large weight dust particles fall into the ash bucket fine dust into the cabinet with the airflow and out of the discharge outlet after the purification treatment by the sieve of the filter bag. The dust which separated outer of the surface of the filter bag makes the resistance increases gradually this time the controller send up signal according to the set resistance range electromagnetic pulse valve is open the high-pressure air which in the air bag spray quickly through the Venturi-tube several times in the first wind-induced ambient air into the filter bag so the filter bag instant expansion and shake off the dust fall into the dust hopper by a purge-air role.

KX superfine rotor classifier is external circulating new type classifier with rotor and its designed and developed by EMCC. based on rotor type classifier and combined plane eddy flow theory this kind of classifier is designed.

New type high efficiency low resistivity cyclone dust collector makes low resistance and high dust collection efficiency.

New type lining plate is adopted in all consumable parts easy to maintain and effectively extanding the life of the host machine.

Dustproof -shock absorpting fan minimize the vibration of the whole system

Flexible sweeper is set inside the machine to keep machine clean.

• Production capacity :16-160T/H Note: This is a mean value capacity and the specific is subject to the clientsactual equipment configuration in site.
• Processable Material :Limestone calcite fly ash Calcium carbide desulfurization kaolin calcium carbonate coal gangue gypsum water granulated slag fine slag powder coal dust bentonite barite marble talc refractory material.
• Range of Application :With grinding mill and ball mill to screen final product. Being set up in sand making production line.

KX superfine rotor classifier is external circulating new type classifier with rotor, and its designed and developed by EMCC. Based on rotor type classifier and combined plane eddy flow theory , this kind of classifier is designed. Proved by practical use, powder classifying efficiency is up to 85%, flexible in fineness adjustment, reliable in performance.

1.Raw material is taken to the inside of classifier from hopper then falls on the combination propeller bulk plate which combines with rotor under the force of rotation of bulk plate. Material will be diffused to all around under the centrifugal force meanwhile material will be raised by the updraft caused by blade rotation and material boiling will be formed on the bulk plate blade. Finer powder will float and suspend and coarse material will falls down along the cylinder wall. Then the first process will be completed.

2.A lower cage-shape rotor 10 is set under the material diatributing tray. The lower cage-shape rotor rotates along with the principle axis. With the rotating movement vortex flow is formed. Then the coarser and heavier material will be scattered again and the finer material will be raised and returned to the circulating air for another classification. And the coarse powder will be excluded from endocone through trickle device.

The telestack conveyor is fully programmable to build partially or fully desegregated stockpiles, in-line stockpiles, precision bin filling and barge loading. The telestack conveyors can make full use of the terrain, it can makes reasonable piles.

Mobile Telestack conveyors have numerous advantages, here are just a few:

• Improves quality of product by eliminating segregation and reducing degradation
• Meet state specifications consistently
• Reduce operating costs by eliminating the loader/dozer/truck stockpiling method
• Increase stockpile volume by 30%, puts more inventory on the same piece of real estate
• Highly portable-convert from transport to stockpile mode in minutes.

• Production capacity :300T/H to 1000T/H
• Processable Material :The telestack conveyor is fully programmable to build partially or fully desegregated stockpiles, in-line stockpiles, precision bin filling and barge loading.
• Purchased equipment :Mobile Telestack conveyor

Mobile Telestack conveyor is made by Shanghai Exceed Industry Co., Ltd. It is a new machine for material handling. The telestack conveyor is fully programmable to build partially or fully desegregated stockpiles, in-line stockpiles, precision bin filling and barge loading. The telestack conveyors can make full use of the terrain, it can makes reasonable piles. Available capacity from 300T/H to 1000T/H, available in lengths from 20 meters to 40 meters. They are road portable and fully customizable.

Mobile Telestack conveyor is made by Shanghai Exceed Industry Co., Ltd. It is a new machine for material handling. The telestack conveyor is fully programmable to build partially or fully desegregated stockpiles, in-line stockpiles, precision bin filling and barge loading. The telestack conveyors can make full use of the terrain, it can makes reasonable piles. Available capacity from 300T/H to 1000T/H, available in lengths from 20 meters to 40 meters. They are road portable and fully customizable.

Belt conveyor is a kind of machine that transfers the material continuously. The belt works under the effect of frictional force. It is not only the component to transfer the material but also the components to transfer the force.

Roller is the main part for power transmission.

Control horizontal positions; reduce the impact of material.

Belt conveyor get tension to avoid slipping; deflection is under control.

High quality of belt conveyor; large dip angle and high delivery value conveying slipping and maturing is could be avoided.

• Production capacity :40-1000T/H Notice: this capacity is mean value and the specific production capacity is subject to clientsactual equipment configuration.
• Processable Material :granite marble basalt iron ore cobble shale bluestone coal cobblestone construction waste
• Range of Application :belt conveyor is the connection of machineries to make a complete system line.

Belt conveyor is a kind of machine that transfers the material continuously. The belt works under the effect of frictional force. It is not only the component to transfer the material, but also the components to transfer the force. EMCC belt conveyor is advanced and simple in structure, easy to maintain. Transfer capacity is more higher, and transfer distance more longer. It is widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. In many situation, it is a very important component of nonstandard machinery.

The belt conveyor is composed of standard parts, advanced and simple in structure, easy to maintain. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. According to different transferring equipment, the transfer system can be one independently or multi-conveyors or combined with other transfer equipments. It can be installed horizontally or aslope to meet the needs of different transfer lines. The conveyor can be operated in the circumstance temperature range from -20 to +40. Temperature of transferred material by this belt conveyor should be lower than 50.

Belt conveyor is composed of rollers and closed conveyor belt. There are two rollers one is for driving conveyor rotating another one is for changing the motor direction of conveyor. Head roller is drived by motor conveyor is draged by force of friction which is generated from head roller and conveyor. Head roller is often set in the discharging end to increase traction for a better dragging. Material is fed from feed end and falls on the rotating conveyor belt and discharged by conveyor delivery end.

Drying machine is used in beneficiation, construction material, metallurgy and chemical engineering industry to dry wet material, rotary dryer has strong adaptation of materials characters

Stable working performance of barrel makes material get uniform dried.

Whole process could be completed quickly

Energy saving and high efficiency

Wide application could make better benefit for manufacturer

• Production capacity :7.9-137.4m3 Note: this capacity is mean value capacity and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material :Limestone calcite coal ash kaolin calcium carbonate gangue gypsum grain slag superfine slag powder coal dust bentonite barite marble talc refractory material
• Range of Application :Drying process focused on construction material or metallurgy industry material like slag clay coal dust or leached slag in beneficiation industry

Drying machine is used in beneficiation, construction material, metallurgy and chemical engineering industry to dry wet material, rotary dryer has strong adaptation of materials characters, many kinds of material could be processed and because of its simple structure, drying machine is general adopted by clients. For a better control of drying machines temperature, thermocouple is set on feeding and discharge device, temperature variation of feeding and discharge end is shown on thermometer to control the working temperature(350-380 degree).

Drying machine is composed by barrel big gear ring pinion riding wheel catch wheel and supporting shaft. Through reducer double reduction pinion drives big gear ring motor drives barrel working in designed speed to dry the material.

Vibrating feeder is for feeding block material for crushing and screening machine. It is divided into steel plate structure and grate structure two types; steel plate structure vibrating feeder is applied in stone and sand production line, grate structure vibrating feeder is for coarse screening material to make whole system more economical, its an essential machine in the crushing and screening line.

Vibrating feeder is for feeding block material for crushing and screening machine. It is divided into steel plate structure and grate structure two types; steel plate structure vibrating feeder is applied in stone and sand production line, grate structure vibrating feeder is for coarse screening material to make whole system more economical, its an essential machine in the crushing and screening line.GZD Series Vibrating feeer adopts vibration motor as the source of vibration, which has features of simple structure, high capacity, low maintenance rate. It can be widely used in the fields of metallurgy, construction, stone crushing, etc.While, ZSW Series Vibrating feeder adopts eccentric block as the source of vibration, gear drove by turns which has low vibrating noise, smooth operation, long usage. It can also pre-screen fine raw materials which makes higher effiency. The design of adjustable fence can prevent the materials from blocking in the gap.

GZD Series Vibrating feeer adopts vibration motor as the source of vibration which has features of simple structure high capacity low maintance. It can be widely used in the fields of metallurgyconstruction stone crushing etc.While ZSW Series Vibrating feeder adopts eccentric block as the source of vibration gear drove by turns which has low vibrating noise smooth operation long usage. It can also pre-screen fine raw materials which makes higher effiency the designing of adjustable fence can prevent the materials from blocking in the gap.

XSD efficient bucket sand washing machines biggest characteristic is that the transmission part is separated from water and sand, so failure rate is much lower than other sand washer, and the novel sealing structure and reliable transmission could be well used to ensure the cleaning and dehydration effect.

Impeller design is reasonable with the characteristics of high cleaning degree reasonable structure large quantity and low consumption.

Entire transmission (including bearings) is isolated from water and raw material to avoid bearing damage due to soaking sand and pollutants.

Using high quality screen made of wear-resistant materials effectively extending the service life of sand washer; and except the screen generally do not need to equip other wearing parts.

Using the bearing products of brands ZWZ and SKF which are the largest bearing manufacturers in China.

The electric motor runs slowly with the impellor after being decelerated by the belt decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder roll with the impellor and grind each other. The impurity covering the sand is washed away. At the same time adding more water the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process the washing function is finished. The clean sand and stone is lifted up by vane. When it goes up slowly the water begins to drop through the mesh and fall back in the washing launder. On one hand water is removed from the sand and stone; on the other hand the water can be fully used. Finally the sand and stone go to the out launder from the rotary impellor to finish the washing task.

• Production capacity : 20-150T / H Note: this is only an average value and the specific value is subject to the clients actual equipment configuration in site.
• Processable Material : XSD sand washing plant is suitable for nature sand and artificial sand crushed from limestone river gravel rocks bluestone cobblestone weathered sand basalt granite quartz diabase etc.
• Range of Application : Construction sites gravel plants concrete hydropower dam site metallurgy building materials and other operations for industries washing.

XSD efficient bucket sand washing machines biggest characteristic is that the transmission part is separated from water and sand, so failure rate is much lower than other sand washer, and the novel sealing structure and reliable transmission could be well used to ensure the cleaning and dehydration effect. With features of reasonable structure, large capacity, low power consumption, etc., it is a deserved ideal industrial sand washing equipment. As this sand washer is very good for separating and cleaning stone powder and soil in the artificial sand, it is often associated with sand making machine for construction sand crushing and washing.

LSX spiral sand washer machine can be used for cleaning and separating the powder dust and soil from construction sand. Novel seal structure and reliable transmission of this sand washing device make sure the cleaning effect.

Clever design plays a role in separation of powder and soil in the sand stone.

Reliable transmission device makes sure the cleaning effect.

Greater capacity smaller power consumption easier operation and maintenance and high efficiency.

Lower price than other series sand washing machine with the same capacity.

The electric motor runs slowly with the impellor after being decelerated by the belt decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder roll with the impellor and grind each other. The impurity covering the sand is washed away. At the same time adding more water the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process the washing function is finished. The clean sand and stone is lifted up by vane. When it goes up slowly the water begins to drop through the mesh and fall back in the washing launder. On one hand water is removed from the sand and stone; on the other hand the water can be fully used. Finally the sand and stone go to the out launder from the rotary impellor to finish the washing task.

• Production capacity : 100-350T / H Note: this is only an average value and the specific is subject to the clients actual equipment configuration in site.
• Processable Material : Limestone river gravel rocks bluestone cobblestone weathered sand basalt granite quartz diabase.
• Range of Application : Construction sites gravel plants concrete hydropower dam site metallurgy building materials utilities and other industries washing operations.

LSX spiral sand washer machine can be used for cleaning and separating the powder dust and soil from construction sand. Novel seal structure and reliable transmission of this sand washing device make sure the cleaning effect. LSX sand washing machine is usually used with a sand making equipment, and there are two sorts of single spiral type and double spiral type, with features of a high degree of washing, reasonable structure, large capacity, low power consumption, and less loss of sand available. Especially transmission parts of sand washing machine are water and sand isolated, so the failure rate is much lower than the commonly sand washing machine. So it is the best choice for upgrading washing sand industry.

Fine Sand Recycling Machine is designed based on the actual situation in our country and absorbing advanced technologies in home and abroad.

Cyclone liner composition containing polyurethane improves the life of whole sand recycling device which is conducive to concentrated slurry and liquid clarification.

Vibrating screen uses polyurethane screen mesh and has a longer life than other types of screen mesh without blocking.

Higner production easier operation and maintenance and higher efficiency.

New whole casting and assembly process.

The HX22 sand recovery equipment is mainly composed of wash tank slurry pump motor hydrocyclone vibrating screen and storage bin. When it starts working the mixture of cement will be pumped into hydro-cyclones by mortar pump and through the cyclone centrifugal grading a mass of concentrated fine sand are given to the linear vibrating screen for sieving and dehydrating. At the same time a small amount of fine sand return back to washing trough from container and will be discharged through overflow pipe when the wash tank liquid level is too high. Mediation fineness modulus of fine sand moisture content25%can be controlled by changing the speed of the pump controlling slurry concentration regulating water and replacing the sand mouth to realize three functions of washing dewatering and grading.

• Production capacity : 50-300T / H Note: this is only an average value and the specific value is subject to the clients actual equipment configuration in site.
• Processable Material : Limestone river gravel rocks bluestone cobblestone weathered sand basalt granite quartz diabase etc., Limestone river gravel rocks bluestone cobblestone weathered sand basalt granite quartz diabase etc.
• Range of Application : Hydropower gravel plant glass coarse coal preparation plant recovery and environmental engineering (mud purification) and other projects.

Fine Sand Recycling Machine is designed based on the actual situation in our country and absorbing advanced technologies in home and abroad. This sand recovery device overcomes problems of fine sand material loss and being difficult to control during the traditional process where sand washing machine is adopted for sand mud washing and dehydration. The equipment can effectively reduce the loss of fine sand and the content of stone powder in water, thus well solving the difficulty where final sand fineness modulus is on the high side and the stone powder content is on the low side.

The new series of 5X sand making machine set three kinds of crushing patterns in one, which is the core equipment in construction, mining, metallurgy industry, highways, railways, bridges, hydropower, mineral grinding areas and mechanism sand industry.

Standard high-performance vertical motor.

Alloy wear-resistant block adoptes highly wear resistant and high temperature resistant materials in important U.S. industries and thus has a longer service life.

Optimize material flow increase production by 30%.

Height can be adjusted to control the feed volume and different proportion of materials that are vertically into the impeller and scattered around of the impeller to adjust the particle size ratio.

Material from the hopper falls into sand crusher and will be divided into two parts by the distributor. One part falls into the high-speed rotation impeller through the middle and is accelerated rapidly within the impeller. That acceleration can be up to several hundred times the acceleration of gravity and then the materials project out from three uniform impeller flow channel at speed of 60-70 m / s; another part of the material falls freely from all around the feeder impact on the vortex branch cavity lining and then will be bounced back to the top of vortex chamber. The movement direction would be changed to start moving down on the diagonal; materials emitters from the impeller form a continuous material curtain. Thus materials will be hit rubbed and grinded twice or several times in whirl crushing cavity. Finally crushed material discharges from the lower discharge port. Throughout the crushing processmaterials impact and crush each other not in direct impact on the metal element but only shock rub and grind the lining thus prolonging mechanical life.

• Production capacity : 70-640T / H Note: this is only an average value and the specific is subject to the clients actual equipment configuration in site.
• Processable Material : Limestone river gravel rocks bluestone cobblestone weathered sand basalt granite quartz diabase
• Range of Application : All kinds of metal and non-metallic mineral cement refractories abrasives glass raw materials construction aggregate mechanism metallurgy and other industries.

The new series of 5X sand making machine set three kinds of crushing patterns in one, which is the core equipment in construction, mining, metallurgy industry, highways, railways, bridges, hydropower, mineral grinding areas and mechanism sand industry. 5X sand making equipment(centrifugal impact crusher) is widely used in a variety of metals and non-metallic minerals, cement, refractories, abrasives, glass raw materials, construction aggregate, sand mechanism, metallurgy and other industries. The sand maker is uitable for crushing various mid-hard ores and rocks, such as iron ore, nonferrous metal ores, silicon carbide, bauxite, quartz sand, corundum, perlite, basalt and other types of high hardness materials.

Mineral powder surface modifying machine, also called as Powder surface coating machine, is widely used in the fields of non-metal stuffing like pigment, plastic, rubber, adhesive, macromolecule materials, high polymer composite, functional materials and dope industries, is an outcome of the development of new and high technology nowadays. After dealing with Powder Coating machine, it can not only improve the compatibility of both non-organic mineral stuff and organic high polymer, enhance binding force of interfaces and rising the mechanical strength and comprehensive ability, but also increase the stuffing ability of powder, saving product cost and adding special physical and chemical property to the product to some extent. For resolving the above-mentioned problem in production, this high efficiency equipment CLG powder surface modifying machine is recommended by our company as a result of hard research work.

1, Continuous operation, large capacity, suitable for industrialization production in various scale.2, High use and less consumption of modifying agent. high covering and active index of power, energy saving.3, Both modifying and dispersion function, suitable for any fine materials, special active effect for material with small proportion and big cubage weight like white carbon, mica powder and talcum powder.4, Powder and agent mixing and running in high speed and vortex, high modifying efficiency, with little change of granulate shape.5, Running at vacuum, air tight, no dust leakage, no pollution, good operation condition, low labor intensity.6, Operating in heat and cold conditions, no additional heating or cooling system required, easy operation.7, Independent fluid and non-fluid agent adding system for continuous, stable and even operation.

• Range of Application : Heavy / light calcium carbonatekaoline, talcumwollastonite, mica, white carbon black, zinc oxidealumina, silicon powder, graphite, magnesium-hydroxide bariumcarbillite claystone and pyrophylite, hexagonite and etc.

Mineral powder surface modifying machine, also called as Powder surface coating machine, is widely used in the fields of non-metal stuffing like pigment, plastic, rubber, adhesive, macromolecule materials, high polymer composite, functional materials and dope industries, is an outcome of the development of new and high technology nowadays. After dealing with Powder Coating machine, it can not only improve the compatibility of both non-organic mineral stuff and organic high polymer, enhance binding force of interfaces and rising the mechanical strength and comprehensive ability, but also increase the stuffing ability of powder, saving product cost and adding special physical and chemical property to the product to some extent. For resolving the above-mentioned problem in production, this high efficiency equipment CLG powder surface modifying machine is recommended by our company as a result of hard research work.

The powder surface treatment is completed mainly by means of three modifying rollers. The dry powder and dosed agent are put into modifying rollers simultaneously. With high speed rotation, the materials and agent is running in the form of fluidizing vortex. The modification is completed with the heat generated by high speed shearing, colliding and friction among the rotor, stator and the powder.

Roller Crusher made by EMCC (Shanghai) is suitable for various kinds of hard middle hard and soft solid materials ( with no more than 200 mpa compressive strength) fine grinding and ultra fine grinding operation widely used in mining

This protection spring is set at the either head of two movable rollers; the working pressure is designed according to the compressive strength of crushing materials. When the Crusher works this protection spring device has no action on the whole but if the crusher encounters hard metal pieces the protection spring can quickly retreat and it will quickly return to its original position after the hard metal pieces fall.

It adopts high manganese steel 2 Mn13 chromium cast steel structure and then after the machine finishing its roughness can reach above 6.3 applicable to crushing materials with fineness demand for 80 mesh to 3 mm below.

It uses 45 # steel casting structure after machine finish machining and heat treatment. Its surface adopts special alloy wear-resistant steel material overlaying weld with high strength high wear resistance suitable for the fineness requirement for 3 to 30 mm in secondary and fine crushing work.

Feed particle size is large a small particle size the variable multistage crush for the level of fragmentation the full realization of a broken top low cost operation two broken. It can reduce 35% of the cost it is a low energy consumption low investment of equipment.

1 Four-roller Crusher4 PG series roller crushers use high extrusion pressure and ground shearing force created by the two sets of individually driven grinding rollers through relatively rotating. When materials enter in V-shaped crushing cavity formed by two grinding rollers they will be crushed by two grinding rollers. Small particles after being crushed will be along the tangent of the rollers. Through the clearance of two grinding rollers the material will be extruded and sheared for the first time (coarse crushing) and then again go into the roller below for second extrusion and tooth grinding(fine crushing) . The ideal particles will finally discharge.

2 Double-Roller Crusher2 PG series roller crusher is mainly composed of frame transmission device crushing roller adjustment device and spring safety device etc. Through the motor triangle pulley drive gear to rotate the roller two rollers relatively rotate. The Ore enters into the crushing space between two rollers due to the effect of friction and will be squeezed and crushed.Crushed material will discharge through the gap between the two rollers under the action of gravity. The minimum distance between the two rollers is the discharging mouth width.

• Production capacity : 1-120 t/h
• Processable Material : such as glass quartz sand iron ore cement coal coke steel slag coal gangue pebbles limestone silica concrete chemical raw materials and other solid materials with fairly hardness.
• Range of Application : it can be used for intermediate crushing and fine crushing in metallurgy mining chemical industry cement construction refractory materials and ceramic industries etc.

Roller Crusher made by EMCC (Shanghai) is suitable for various kinds of hard, middle hard and soft solid materials ( with no more than 200 mpa compressive strength) fine grinding and ultra fine grinding operation, widely used in mining, cement, thermal power, metallurgy, building materials, chemical industry, etc.

High-efficiency Fine Crusher is medium and fine material crusher combining domestic and international stone and sand industry specific situation and it absorbs latest technology.

High manganese steel and high chromium cast are adopted product has good abrasive resistance and longer service life.

High quality motor is adopted to guarantee stable operation of machine.

Easy to observe the situation of machine when machine is shut down.

High capacity and good shape of final product.

Motor drives rotor rotating material will be taken into first crushing cavity to be impacted and crushed by hammer plate then be taken to secondary crushing cavity to be crushed again finally final product will be discharged from discharge port.

• Production capacity : 20-300T/H Notice: this capacity is mean value and the specific production capacity is subject to clientsactual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction waste.
• Range of Application : Cement industry mining mineral processing building materials and other departments.

High-efficiency Fine Crusher is medium and fine material crusher combining domestic and international stone and sand industry specific situation, and it absorbs latest technology. It adopts advanced production technique and unique structure design. Fine crusher combines the advantages of hammer crusher and impact crusher, it leads in medium soft material crusher field. High-efficiency Fine Crusher has stable working performance and simple technique and structure, high capacity and longer service life, it is widely applied for granite, basalt, limestone, pebble, cement clinker, comprised, iron ore, bauxite crushing, also it is applied in artificial sand, high class road, railway, water conservancy, airport, construction, cement, refractories, metallurgy industries to produce high quality stone.

Finished products of sand and gravel production line include stones and artificial sand. In the production factory of road and building materials this production line is usually established.

• 1.Big crushing ratioand high capacity;
• 2.The produced aggregate is mostly reasonable cubic and low content of needle flake material. And the aggregate can be used for highway construction.
• 3.The artificialsand is with higher quality than natural
• 4.Wearing parts useshigh-strength wear-resistant materials to enable low loss and long service life.

• Production capacity : 10-500T / H Note: this is only an average value and the specific value is subject to the clientsactual equipment configuration in site.
• Processable Material : Sand making process of limestone granite marble basalt iron ore river pebble shale bluestone coal cobblestone construction waste
• Range of Application : Mining smelting building material highway railway water conservancy and chemical industry and other industries

Finished products of sand and gravel production line include stones and artificial sand. In the production factory of road and building materials, this production line is usually established.

Raw material is screened and carried by vibrating feeder which conveys large material into jaw crusher equably for primary crushing. Crushed material would be transported by belt conveyor into WKS Symons cone crusher for fine crushing and then materials enter into circular vibrating screen by belt conveyor for screening to distinguish the different specifications of finished product and unqualified gravel would be conveyed into cone crusher to be crushed again.

We are the main supplier of this product.

QSM-5-15-B-SH is used for the cutting operations in petrochemical industry. The equipment is capable of cutting any 0-100mmthick materials (except glass carbon, diamond and special hard alloy), and is applied in the cutting operations of dismantlement and maintenance work related to petroleum pipelines and storage tanks.

QSM-5-15-B-SH is a new type of portable cutting equipment functioning by front-mix abradant water jet flow; it adopts cold cutting technologies.

This waterjet cutting machine has passed spark test, static electricity test and temperature test, and met the anti-explosion requirements.

Note: QSM-5-15-B-SH waterjet cutting machine is an integral part of the main machine system and provides high-pressure water jet flows for cutting operations; it needs to assist cutters (for example pipe cutter), cutting gun assembly and high/low-pressure hose to complete cutting operations.

• Small, light and portable;
• Simple and compact structure, easy operation;
• The anti-explosion motor power (EXd CT4) meets the operation requirements;
• Low noise, free of environmental pollution;
• Low working pressure, easy system maintenance.