Tensile, compression, shear strength and elongation are the prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.        

            The “ASIAN”Universal testing machine provide a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton.

            The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.

Measuring system consists of microprocessor panel with serial interface software. In fully computerized system, you are dependent on the type of computer used. Our instrument is digital cum computerized model which can be used independently digital instrument as well as computerized instrument

Highlights :

• System is independent of the type of computer used for communication.
• On line display of Load/Displacement/extension/Strain rate/Load rate
• On line Real time graph of load vs. displacement and stress vs. strain
• Output of 4 graphs for single test run viz. Load vs. Disp., Stress vs. Strain, Load vs. extension with curve tracing/zooming facility.
• Wide range of output (test results) selection
• Unit changing facility for different units like N, kN, Kg, T, Mpa
• Test can be carried out with the help of control panel independently without PC. Still you will get all the results on any printer connected to computer.
• Print out format as per customer requirement (You have to give details in advance)

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as zip, rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

The “ASIAN”Tensile Testing Machine provides a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gear box and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. There is a socket in the indicator which is connected to the PC. The load directly indicated in kilograms or Newton.

We provide the Window based software which give the different measurement parameter and the graph between load vs elongation. The report can be printed by using proper printer.

The elongation of the test specimen is measured on a digital indicator fixed on the frame of the test, which indicates the distance between the grips.

The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer.

Various built in safety arrangements such as over travel protection, are provided.

The tester is finished in painting, powder coating and bright chrome/zinc plating to give the apparatus a corrosion resistant finish. It is supplied compiled which electrical. Which include micro-, switches. Push buttons and contactors for safe and convenient operation.

A variety of grips suitable for holding different materials are offered as optional accessories.