GST : 06AAQFA5880Q1ZL
Mobile Email
5.0/5Our Products
We are leaders in the market for providing best range of Govinda 20 MM UPVC Pressure Pipes, Govinda UPVC Agriculture Irrigation Pipe, Govinda 60mm UPVC Pressure Pipes, Govinda 80 MM UPVC Pressure Pipes and UPVC Agriculture Pressure Pipe
Agriculture/Pressure pipes are manufactured as per IS 4985:2000 standard and are available in 20 mm to 315 mm sizes in different pressure class.Rigid PVC Plastic Pipe is most commonly utilized for installing as portable water supplies system both below & above ground level. These piping system has long service life with superior resistance to high impact. Offered Rigid PVC Plastic Pipe is also suitable to be used for domestic & commercial water piping systems.
UPVC Agriculture/Pressure pipes are made from highest grade quality resin. These pipes & fittings are mainly used for water supply in agriculture, drip irrigation & sprinkler lines etc as well as for drinking water distribution. However, these can also be used in cable ducting, ventilation pipe lines & slurry lines etc.
Table
| Nominal Outside Diameter (Nominal Size) | Mean Outside Diameter | Class 1 0.25 Mpa | Class 2 0.4 Mpa | Class 3 0.6 Mpa | Class 4 0.8 Mpa | Class 5 1.0 Mpa | Class 6 1.25 Mpa | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | |
| 20 | 20 | 20.3 | - | - | - | - | - | - | - | - | 1.1 | 1.5 | 1.4 | 1.9 |
| 25 | 25 | 25.3 | - | - | - | - | - | - | 1.2 | 1.6 | 1.4 | 1.8 | 1.7 | 2.1 |
| 32 | 32 | 32.3 | - | - | - | - | - | - | 1.5 | 1.9 | 1.8 | 2.2 | 2.2 | 2.7 |
| 40 | 40 | 40.3 | - | - | - | - | 1.4 | 1.8 | 1.8 | 2.2 | 2.2 | 2.7 | 2.8 | 3.3 |
| 50 | 50 | 50.3 | - | - | - | - | 1.7 | 2.1 | 2.3 | 2.8 | 2.8 | 3.3 | 3.4 | 4 |
| 63 | 63 | 63.3 | - | - | 1.5 | 1.9 | 2.2 | 2.7 | 2.8 | 3.3 | 3.5 | 4.1 | 4.3 | 5 |
| 75 | 75 | 75.3 | - | - | 1.8 | 2.2 | 2.6 | 3.1 | 3.4 | 4 | 4.2 | 4.9 | 5.1 | 5.9 |
| 90 | 90 | 90.3 | 1.3 | 1.7 | 2.1 | 2.6 | 3.1 | 3.7 | 4 | 4.6 | 5 | 5.7 | 6.1 | 7.1 |
| 110 | 110 | 110.4 | 1.6 | 2 | 2.5 | 3 | 3.7 | 4.3 | 4.9 | 5.6 | 6.1 | 7.1 | 7.5 | 8.7 |
| 125 | 125 | 125.4 | 1.8 | 2.2 | 2.9 | 3.4 | 4.3 | 5 | 5.6 | 6.4 | 6.9 | 8 | 8.5 | 9.8 |
| 140 | 140 | 140.5 | 2 | 2.4 | 3.2 | 3.8 | 4.8 | 5.5 | 6.3 | 7.3 | 7.7 | 8.9 | 9.5 | 11 |
| 160 | 160 | 160.5 | 2.3 | 2.8 | 3.7 | 4.3 | 5.4 | 6.2 | 7.2 | 8.3 | 8.8 | 10.2 | 10.9 | 12.6 |
| 180 | 180 | 180.6 | 2.6 | 3.1 | 4.2 | 4.9 | 6.1 | 7.1 | 8 | 9.2 | 9.9 | 11.4 | 12.2 | 14.1 |
| 200 | 200 | 200.6 | 2.9 | 3.4 | 4.6 | 5.3 | 6.8 | 7.9 | 8.9 | 10.3 | 11 | 12.7 | 13.6 | 15.7 |
| 225 | 225 | 225.7 | 3.3 | 3.9 | 5.2 | 6 | 7.6 | 8.8 | 10 | 11.5 | 12.4 | 14.3 | 15.3 | 17.6 |
| 250 | 250 | 250.8 | 3.6 | 4.2 | 5.7 | 6.5 | 8.5 | 9.8 | 11.2 | 12.9 | 13.8 | 15.9 | 17 | 19.6 |
| 280 | 280 | 280.9 | 4.1 | 4.8 | 6.4 | 7.4 | 9.5 | 11 | 12.5 | 14.4 | 15.4 | 17.8 | 19 | 21.9 |
| 315 | 315 | 316 | 4.6 | 5.3 | 7.2 | 8.3 | 10.7 | 12.4 | 14 | 16.1 | 17.3 | 19.9 | 21.4 | 24.7 |
Our firm is a manufacturer, supplier and trader of ASTMD Plumbing Pipe (ASPER ASTM D 1785). It ensures durability, rust resistance and simple installation. Moreover, this ASTMD Plumbing Pipe (ASPER ASTM D 1785) can be acquired by customers at nominal price.
Applications
ADVANTAGES
Technical Specification
| Nominal Bore | Outside Diameter | Wall Thickness(mm) | Wall Thickness |
|---|---|---|---|
| (inch) | (D) (mm) | (t) (mm) | (t) (mm) |
| 44198 | 21.34±0.10 | 2.77+0.51 | 3.73+0.51 |
| 44259 | 26.67±0.10 | 2.87+0.51 | 3.91+0.51 |
| 1 | 33.40±0.13 | 3.38+0.51 | 4.55+0.53 |
| 44504 | 42.16±0.13 | 3.56+0.51 | 4.85+0.58 |
| 44502 | 48.26±0.15 | 3.68+0.51 | 5.08+0.61 |
| 2 | 60.32±0.15 | 3.91+0.51 | 5.54+0.66 |
| 21/2 | 75.20±0.15 | 5.16+0.61 | 7.01+0.48 |
| 3 | 88.90±0.20 | 5.49+0.66 | 7.62+0.91 |
| 4 | 114.30±0.23 | 6.02+0.71 | 8.56+1.02 |
Product Range
| Size | Mean | SCHEDULE 40 | SCHEDULE 80 | ||||
|---|---|---|---|---|---|---|---|
| (inches) | O.D | Wall Thickness | Pressure | Wall Thickness | Pressure | ||
| Rating | Rating | ||||||
| Min | Max | (MPa) | Min | Max | (MPa) | ||
| 2-Jan | 21.24 | 2.77 | 3.28 | 4.14 | 3.73 | 4.24 | 5.86 |
| 4-Mar | 26.27 | 2.87 | 3.38 | 3.31 | 3.91 | 4.42 | 4.76 |
| 1 | 33.27 | 3.28 | 3.89 | 3.1 | 4.55 | 5.08 | 4.34 |
| 1.25 | 42.03 | 3.56 | 4.07 | 2.55 | 4.85 | 5.43 | 3.59 |
| 2-Nov | 48.11 | 3.68 | 4.19 | 2.28 | 5.08 | 5.69 | 3.24 |
| 2 | 6.17 | 3.91 | 4.42 | 1.93 | 5.54 | 6.2 | 2.76 |
| 2.5 | 73.02 | 5.16 | 5.77 | 2.07 | 7.01 | 7.85 | 2.9 |
| 3 | 88.7 | 5.49 | 6.15 | 1.79 | 7.62 | 8.53 | 2.55 |
| 4 | 114.07 | 6.02 | 6.73 | 1.52 | 8.56 | 9.58 | 2.21 |
Mr. Munish Bansal And Mr. Honey Bansal(Asian Tubes)
Opposite Huda Sector-3 Hisar Road, Fatehabad, Haryana - 125050, India
Share us via 
