Atlas Precision Tools india Co.

Phase 5, Mohali, Punjab

Uses and Applications:-

• Used for removing surface residual magnetism from different types of components and tools.
• Demagnetization improves life of cutting tools, press dies and punch.
• To demagnetize lapping and honing tools.
• In different types of powder metallurgical processes.
• Used in area which involve sensors for e.g. eddy current sensor reacts to magnetism.

Features :-

• Body is made up of bakelite for prevention from electric shock.
• Coils are made from fine quality copper procured from trusted vendors.
• Fan cooling system for coil to prevent heating of coils.

Note :

• Special sizes are also manufactured on request.
• Conveyor system for demagnetizer can be provided on request as per requirement.

We are engaged in the manufacturing and supplying of rectangular electro magnetic chucks. The rectangular electro magnetic chucks are manufactured using quality raw materials procured from the reliable sources. These rectangular electro magnetic chucks have powerful magnetic pulling force and these can be used on grinding, milling, planning, and shaper machines. The top plate of rectangular electro magnetic chucks is made using steel and aluminum sated together. These rectangular electro magnetic chucks have high mechanical rigidity and proven robustness. These electro magnets are easy to install on machines as they have long bottom plates. These can be clamped from bottom plates on machine table. Electro magnetic chucks are manufactured in cross pole and long pole series. Again both series can be classified in two types of poles i.e. Standard poles and close poles. These rectangular electro magnetic chucks are tested for water proofing. Poles of chucks are extended for maximum effective magnetic clamping area. These rectangular electro magnetic chucks have multiple coils for powerful magnetic pull. These rectangular electro magnetic chucks are manufactured in standard sizes but special size chucks can be made on order. use : the standard pole electro magnets can be used on grinding, milling, planning, drilling and shaper machines for holding big or medium components where as close pole electro magnets can be used for holding smaller components comparatively.

How To Define Model : For e.g. Permanent magnetic chuck for 200x100x45mm micro fine pole will be mentioned as : PMMFP-2010

We are engaged in the manufacturing and supplying of Rectangular Electro Magnetic Chucks. The Rectangular Electro Magnetic Chucks are manufactured using quality raw materials procured from the reliable sources. These Rectangular Electro Magnetic Chucks have powerful magnetic pulling force and these can be used on grinding, milling, planning, and shaper machines. The top plate of Rectangular Electro Magnetic Chucks is made using steel and aluminum sated together. These Rectangular Electro Magnetic Chucks have high mechanical rigidity and proven robustness. These electro magnets are easy to install on machines as they have long bottom plates. These can be clamped from bottom plates on machine table. Electro Magnetic Chucks are manufactured in cross pole and long pole series. Again both series can be classified in two types of poles i.e. Standard poles and Close poles. These Rectangular Electro Magnetic Chucks are tested for water proofing. Poles of chucks are extended for maximum effective magnetic clamping area. These Rectangular Electro Magnetic Chucks have multiple coils for powerful magnetic pull. These Rectangular Electro Magnetic Chucks are manufactured in standard sizes but special size chucks can be made on order. Use : The standard pole electro magnets can be used on grinding, milling, planning, drilling and shaper machines for holding big or medium components where as close pole electro magnets can be used for holding smaller components comparatively.

Note :

• For square or round it is to be mentioned with Model No.
• Special sizes and different shape tube magnets can be manufactured as per requirement.

We bring forth well designed Round Permanent Magnetic Chucks for or esteemed clients. These Round Permanent Magnetic Chucks are very easy to install as they can be clamped on machine with the flange provided with the machines. These Round Permanent Magnetic Chucks come in standard and radial poles. Standard Round Permanent Magnetic Chucks are manufactured in three types of poles (to suit every individual requirement, one is standard poles, the pole in this chuck are wider. Second one is called close pole. These Round Permanent Magnetic Chucks can be used for clamping of medium sized components. Third one comes in fine poles these are used for clamping small components. Our all products are available at very competitive prices. These come in standard sizes but special size Round Permanent Magnetic Chucks can be made on order. Use : Used in different kind of machines to hold work pieces like, rotary grinder, lathes and also these can be used for light machining.

We are offering Demagnetizer. The Demagnetizers provided by us can quickly remove magnetic effect from steel rods, pipes, wires, drills and tools etc. Our Demagnetizers require 220 volts Ac for operation. We deal in both Aperture and Platen Type Demagnetizers, suiting the client’s requirements. Widely known for excellent quality and durability, these Demagnetizers are surely the right choice to vouch for. APERTURE Type Demagnetizers : These produce strong alternating current inside the window and work pieces are passed through this window to remove magnetism from the work pieces. These demagnetizers are very powerful and efficient and can remove magnetism from materials such as: bearing steel, high speed steel, die steel, spring steel and off course mild steel. These can be used for inline production process. A roller conveyer can be fitted from inside the window for continuous operation in production. PLATEN Type Demagnetizers : These produce strong alternating magnetic field on surface of demagnetizer. The work pieces are passed back and forth from the top side of demagnetizer. These demagnetizers are suitable for removing magnetic effect from tools, dies, drills, punches, hardened dies and cutters. Thus, are very useful in tool room operations and for production in small industries.

We are engaged in the manufacturing and supplying of Rectangular Electro Magnetic Chucks. The Rectangular Electro Magnetic Chucks are manufactured using quality raw materials procured from the reliable sources. These Rectangular Electro Magnetic Chucks have powerful magnetic pulling force and these can be used on grinding, milling, planning, and shaper machines. The top plate of Rectangular Electro Magnetic Chucks is made using steel and aluminum sated together. These Rectangular Electro Magnetic Chucks have high mechanical rigidity and proven robustness. These electro magnets are easy to install on machines as they have long bottom plates. These can be clamped from bottom plates on machine table. Electro Magnetic Chucks are manufactured in cross pole and long pole series. Again both series can be classified in two types of poles i.e. Standard poles and Close poles. These Rectangular Electro Magnetic Chucks are tested for water proofing. Poles of chucks are extended for maximum effective magnetic clamping area. These Rectangular Electro Magnetic Chucks have multiple coils for powerful magnetic pull. These Rectangular Electro Magnetic Chucks are manufactured in standard sizes but special size chucks can be made on order. Use : The standard pole electro magnets can be used on grinding, milling, planning, drilling and shaper machines for holding big or medium components where as close pole electro magnets can be used for holding smaller components comparatively.

We offer demagnetizer.the demagnetizers provided by us can quickly remove magnetic effect from steel rods, pipes, wires, drills and tools etc. Our demagnetizers require 220 volts ac for operation. We deal in both aperture and platen type demagnetizers, suiting the client’s requirements. Widely known for excellent quality and durability, these demagnetizers are surely the right choice to vouch for. aperture type demagnetizers : these produce strong alternating current inside the window and work pieces are passed through this window to remove magnetism from the work pieces. These demagnetizers are very powerful and efficient and can remove magnetism from materials such as: bearing steel, high speed steel, die steel, spring steel and off course mild steel. These can be used for inline production process. A roller conveyer can be fitted from inside the window for continuous operation in production. platen type demagnetizers : these produce strong alternating magnetic field on surface of demagnetizer. The work pieces are passed back and forth from the top side of demagnetizer. These demagnetizers are suitable for removing magnetic effect from tools, dies, drills, punches, hardened dies and cutters. Thus, are very useful in tool room operations and for production in small industries.

Round Electro Magnetic Chucks 03

Round Electro Magnetic Chucks 03

Details :

• Electromagnetic rectangular chucks are manufactured in standard pole, close pole, fine pole and micro fine pole for different applications.
• How to define model - For e.g. electromagnetic rectangular chuck for 450X200X105mm micro fine pole will be mentioned as : EMMFP-4520
• Electromagnetic round magnetic chuck are manufactured in radial pole and concentric pole.
• For concentric pole use code ‘ERCO’ along with model no. And for radial pole use code ‘ERRD’ along with model no.
• For example:- if electromagnetic chuck of dia. 10 inches radial pole will be mentioned as : ERRD-25.
• Small size are manufactured in permanent magnet but small size can be manufactured on request.   
• Special size orders are also undertaken.

Use and Application:- To easy prying apart oily, sticky, polished or pre-finished steel sheets, our permanent magnetic sheet floaters are designed for faster safer separating sheets in a stack.

Features-

• Sheet floater consists of a rust-resistant non-ferrous casing which has an anisotropic magnet systems installed inside. With our design, there are mounting holes available on sheet floaters to enable easy and secure fixing, and can be also used in conjunction with major machine tools and contributes to production efficiencies when fully integrated into the production flow.
• To achieve the optimum separation of the sheets, the height of the stack should not be more than 10 to 20% of the height of the sheet floater. If the sheets are to be removed with an automatic process, multiple floaters will be needed around the stack.
• The real product may vary from the images and specification and other details printed in this catalog due continous Research and Development

Terms and Conditions

• 50% advance along with firm order and balace payment at the time of delivery after inspection at our works.
• Order once placed cannot be cancelled.
• Due to continous upgradation there could be changes in design and specification to make the product better.
• Packing, forwarding and taxes are extra as applicable.
• All disputes are subject to Mohali jurisdiction.