Oil And Lubricants #247406

HYDRO MAX HLPTMis a premium quality extra heavy duty type Anti Wear Hydraulic oil recommended for lubrication of Axial, Piston, vane and Gear pumps. Also recommended for use in power systems that are subject to shock loads, variable speed for continuous operating conditions of high severity. Also used for moderately loaded industrial gears, bearings and hydraulic devices with hydro mechanical actuator.

Meets the performance requirements of IS :11656 1986, VICKERS 104C Vane pump test, Dension HFO, Hf2, DIN 51524 Part -2

• Fast, Smooth and reliable machine operation.
• Excellent wear protection.
• Ready to separate from water.
• Good hydrolytic stability and seal compatibility.
• Protection from rust and corrosion.
• Good load carrying capacity.
• Extended hydraulic pump life.

TRANSGEAR EPTM SAE-90 is an Extreme Pressure gear oil recommended for use in manual gear transmissions of LCV, HCV, Trucks, Buses, Tractor and Earth Moving machinery and Equipment.

Meets the performance requirement of API-GL 4, MIL-L-2015, IS:1118.

• Smooth Gearshift.
• Provides protection from rust and corrosion.
• Minimize wear and scuffing.
• Good seal compatibility.
• Provide extended gear life.

TRANSGEAR TQTMis intended for use in automatic transmissions and power steering applications in passenger car, truck, bus and off high way equipment, fork lift, hydraulic equipment, Industrial transmissions and synchromesh gear boxes where GM TYPE A Suffix A Fluid (TASA) is recommended.

• Excellent clutch friction performance.
• Excellent oxidation & corrosion protection.
• Excellent low temperature fluidity & seal compatability.
• Protection against wear and rust.
• Smoother gear performance.

GEAR MAXis a Mild EP gear oil recommended for use in manual transmissions and spiral bevel gears used in industrial equipment and some differential operating under moderately severe conditions of speed and load. These oils are not intended for axles with hypoid gears.

Available in SAE 140 & SAE 90 Viscosity grades.

• Mild EP characteristics.
• Good oxidation stability.
• Protection against copper corrosion.
• Extended gear life.

TRANS - UTTOTMis a premium quality Universal Tractor Transmission Oil (commonly known as Wet Brake Oil (or) OIB oil) recommended for use as transmission oil in Mahindra, Swaraj, Tafe, Johndeer, New Holland, Escorts, Eicher, Massey Ferguson Sonalika tractor power transmission system including hydraulic, differential and oil immersed brake (OIB) system. Also recommended to use in power shift transmissions and torque convertors both in on and off high way equipment and high pressure hydraulic systems.

Meets the performance requiremets of SAE 30, Allission C-4, API GL4, Dension UTTO, HF-0 & Vickers Vane pump.

• Excellent lubrication for complete transmission system including Hydraulic, differential clutch and oil immersed brakes.
• Excellent wet brake and transmission performance.
• Supports noise free brake operation for longer periods.
• Adequate EP, Anti wear protection.

Grease is a mixture of petroleum oil and thickener (soap) dispersed in oil. The first stage of grease manufacture is to prepare the soap by adding fats and specified quantity of oil in the saponification kettle (Grease Cooking Kettle) with an alkali until the process is completed. In this process, normally temperature of reaction goes up to desired temperature. This cooking kettle is open blending kettle with limped coil system for heating through thermic fluid heating system. Over here, the balance amount of oil is added and gently blended in the cooking kettle after soap is formed gradually till the desired specification is reached.