Other Products / Services #2491197

• Standards as per ISO 2858
• End suction top discharge
• Stage single
• Back pullout design
• Closed Impeller
• Gland packing/Mechanical seal

• HVAC systems
• Water transfer
• Distribution systems
• Fire fighting
• Cooling tower

Bearing Housing

• Unique design for Grease & Oil Lubrication
• Provisions for temperature gauge / vibration probe

Bearings

• NR type replaced with standard type

• Mounting: Horizontal
• Stages: 3 to 15
• Radial flow impellers with vane diffusers mechanical seal/ gland packing
• Grease lubricated antifriction bearings

• Mine dewatering
• Descaling in steel mills
• Boiler feed application
• Reverse osmosis for desalination plants water supply / general industry
• Fire fighting

• Mounting: Centreline/ vertical
• Multi-outlet design
• Balance valve design for axial thrust bush bearing/ roller bearing

• End suction top discharge
• Mounting: Horizontal
• Stage: Single
• Back pullout design
• Closed impeller
• Mechanical seal/ gland packing
• Grease lubricated antifriction bearings

• Building service
• Sprinkler systems
• Water supply
• General industry

We are an eminent name in supplying of a quality gamut of Aluminum Spray.

• It is a specialty high temperature coating developed to resist heat at high temperatures and to withstand Corrosion, Humidity, and other hazards normally encountered in chemical plant environment
• It withstands temperature up to 600C on a continuous basis (occasionally up to 700C) and does not get burned or peeled of or tarnished

Product Benefits:

• Ready to use touch up spray for metals
• Better gloss retention, coverage and dry time
• Superior resistance to chipping, cracking and peeling
• Smooth, durable and long lasting finish

Applications:Specifically formulated to protect high temperature surfaces operating up to 6000C such as Engines, manifolds, mufflers, furnaces, heaters, & free standing fire places etc

Usage Directions:

• Shake well before use until the sound of the ball is audible
• Clean & degrease surface
• Hold Can upright & maintain full pressure on valve while spraying. Spray directly on the surface
• Repeat spraying whenever necessary

Plasti Dip is an air dried, flexible, liquid matt coating for use on virtually anything.

• Heavy duty
• Remains flexible
• Elastomeric coating
• Seals out air and moisture
• Stops rust and corrosion
• Resists acids, solvents, water and alkalines.

Once applied, Plasti Dip Elastomeric coating protects virtually any surface. The coating will form an air and moisture-tight film that will not chip, crack or peel. Plasti Dip maintains a 300 400 % elongation, in temperatures ranging from (minus) -34 Centigrade to (plus) +93 Centigrade, even under extreme conditions.

Plasti Dip is a tough coating, and resists akalines, acids, salts, moisture and most chemicals, to ensure positive protection for concrete or metal surfaces. Because Plasti Dip is flexible, it performs when extreme expansion or contracting conditions would cause most other paints or coatings, to chip, crack, peel or breakdown.

To maintain a Plasti Dip coating, even after years of exposure, simply wash down to remove grime etc., and recoat. A new application of the coating will fuse to the original coating and extend protected life.

For coverage and other technical information, please refer to our Technical Data Sheet.

For Manufacturers Safety Data information, please refer to our MSDS Sheet.

Typical applications include:

Structural concrete;

• Sealing block walls
• Roadway structures
• Swimming pools
• Foundations
• Fountains
• Walls and ceilings in processing plants (wherever concrete deterioration is a problem)

Structural Steel;

• Joists and Beams
• Metals (subjected to any corrosive environment)
• Bridges
• Cushions Hand Rails
• Railings
• Storage towers
• Below ground tanks
• Exposed machinery

With the constant support of our expert team, we are engaged in offering a huge assortment of Break Away.

Formulated For The Tough Jobs:

• Away is a pure oil based product formulated to penetrate faster and lubricate longer
• It leaves a thicker, longer lasting lubricating film vs. light duty solvent-based water displacement formulas
• Break Away is famous for completing the cycle of lubrication, reducing the coefficient of friction of hot or cold moving parts
• Penetrates And Frees Rusted, Frozen Parts bolts, locks, engine parts, hinges, etc
• Lubricates Moving Parts to reduce friction and stop annoying squeaks on rollers, hinges, chains, bearings, wheels, bicycle & motorcycle chains, fishing equipment and more
• Also reduces friction heat build-up in high pressure applications
• INHIBITS RUST AND CORROSION on marine equipment, tools, industrial machinery, switches, relays, rollers, locks, guns and fishing equipment, aluminum and chrome surfaces, and much more

We are the prominent name in supplying Epoxy Compounds.This compound is highly demanded in the international markets for their unique features such as durability, efficiency, optimum quality and long shelf life. Being highly efficient, this compound is very popular in the industry. The Salient Features of these compounds include:

Features:

• It is moldable
• Ease of mixing
• Cures to a hard mass
• Can be shaped, Drilled, Filed, Sanded, Painted upon

Applications Areas:

• Making up uneven surface in ferrous & non ferrous casting
• Filling blow holes & even giving smooth radii to joints/corners of wooden or metal patterns / master
• Repairing dents & alo mending silencer pipes
• Repairing damaged insulators, sealing leaking transformers, moisture proofing & preventing loose terminal connections
• Sealing leaks in ships & bolts
• Sealing leakages in the radiator & petrol/diesel tanks

M seal steel putty is a two component, easy to use epoxy putty. It sets at room temperature. It is available in the form of co-extruded and co-centric sticks. It is used as a sealant to join various ferrous and non-ferrous surfaces. It sets into a hard mass that can be machined, drilled, and painted.

Application Areas:

• Build broken metal castings
• Levers
• Manifolds
• Muffler
• Exhausts
• Tools
• Machinery
• Seal leakages in tanks, radiators, furnaces, pipes, air ducts
• Fill cracks in engine blocks, heads, throttle housings, rebuilds stripped bolt-holes
• Renew surfaces damaged by corrosion and abrasion

Usage Directions:

• Cut required amount of putty, knead with fingers till material is uniform in color
• Clean and roughen the surfaces to be joined, mended
• Apply putty, force into gaps wherever necessary
• Smoothen the putty with wet fingers.
• Putty will harden after about 15 minutes (at 27+- 2C)
• Once cured it can be drilled or sanded
• Replace unused quantity in wrapper and canister
• Store in a cool, dry place

Cautions:

• Do not use on areas that come in direct contact with food, drink, flame or high temperature
• May cause skin or eye irritation. Harmful if swallowed
• Keep out of Reach of Children
• Actual setting time may vary depending on temperature and surface conditions

Safety and First Aid:

• Wash hands with warm water and soap after use
• Use eye and respiratory protection equipment, in case material is drilled or sanded
• In case of accidental eye contact, flush with plenty of water and seek medical advice
• In case of internal consumption seek medical attention immediately

Rustolene is a powerful rust dis-integrating solution. It is a quality product that has been a trusted for Rust removing for years. This is a multipurpose maintenance aid and significantly reduces the maintenance cost. It is specially formulated to fight rust, which makes it indispensable to industrial plant, factories and garages.

Overall Rustolene acts as a dis-integrator, dismantler, Lubricator, decarboniser & cleaner The active ingredients in Rustolene attack the point where rust and metal parts are bound together and consequently eliminate rust from the surface. It also penetrates the tightest of joints reaches between the finest of threads and enters the innermost points of inaccessible mechanisms

CHARACTERSTICS/ADVANTAGES:

• Non Injurious
• Saves Time & Labour
• Excellent film spreading properly
• Excellent penetrating properties
• Non Corrosives
• Non Messy

USAGE:

Used in industries for rust disintegration and lubrication for pipelines.*Opening of jammed nuts & bolts* Pipeline* Crushing & Grinding Equipments* Valves & Pumpset.* Motor Power Generators* Lifts, Crane, Hoists, Sprocket.* Storage Tank* Compressors 7 Blower* Heat exchangers.

• Office Equipments* Type writer* Duplicator Machine* General Machines
• Farm MAchines* Thressing Machine* Combine harvesters* Tractors
• Automobile* Garages for cleaning of all metallic parts & Engine

Fevicol SR 998 IS is a synthetic rubber based solvent containing contact adhesive. It exhibits excellent bond strength. The adhesive dries in a tough flexible film with good resistance to water and ageing. It can be applied by brush or roller.

EL actuators use worm and worm-wheel reduction gearing to provide tight positioning control and the self locking feature necessary for controlling larger valves, particularly butterfly types.

The housing is of aluminium castings, it contains the drive motor and worm gear assembly, together with the anti-condensation heater and main terminal strip.

EL actuator take the full range of control options, it has mechanical end position stops and torque switches. Visual position indication is by a window in the top cover.

A geared manual override is fitted as standard, it is engaged by means of a declutching lever. When the motor is energised the unit automatically returns to motor operation, thus ensuring operator safety.

These actuators are available for ON / OFF and modulating applications.

The BC model knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as:

• Chemical plants
• Wastewater treatment Plants
• Power plants
• Mining
• Food and Beverage
• etc.

Sizes:From DN 150 x 150 to DN 600 x 600 (other dimensions on request)

Working pressure:150 x 150 to 600 x 600: 1 kg/cm

For higher pressure: Casted bodies (on request)

Directives:DIR 2006/42/CE (MACHINES)DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)DIR 94/9/CE (ATEX) Please contact Orbinox for information and availability of categories and zones.

ET (SER.20) Unidirectional-MSS SP-81

The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service applications.The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:

• Pulp and Paper
• Power plants
• Mining
• Chemical plants
• Wastewater
• Food and Beverage
• etc.

Sizes:DN 2/50 to DN 36/900 (larger diameters on request)

Working pressure:DN 2/50 to 24/600: 150 psi (10 kg/cm)DN 30/750: 100 psi (7 kg/cm)DN 36/900: 100 psi (7 kg/cm)

Standard flange connection:EN1092 PN10 and ANSI B16.5 (class 150)

Directives:DIR 2006/42/CE (MACHINES)DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)DIR 94/9/CE (ATEX) Please contact Orbinox for information and availability of categories and zones.

The BX model knife gate is a bi-directional wafer valve specifically designed for the isolation of pulverized coal burner lines on coal fired boilers during maintenance. The valve is dust tight which makes it suitable for other bulk handling applications, such as silo outlet valves. This valve has been designed for use in potentially explosive areas (ATEX) and it complies with DIN EN 14460 (Explosion resistant equipment). In the closed position, the valve can be used as an effective measure against flame propagation in the event of an explosion.

Sizes:DN 700 to DN 1000 (Smaller and larger diameters on request).

Working pressure:.DN 700 to DN 1000: 3 bar

Standard flange connection:DIN PN 10.
The BX valve complies with the following European directives:DIR 2006/42/EC (machines)DIR 97/23/EC (PED): Fluid: Group 1 (b), 2 (Cat. I, mod A)DIR 94/9/EC (ATEX))Limits of DIR 94/9/EC: These valves have been classified in Device Group II and fall in the following categories:II 1GD / 3GD c Category 1G or 1D inside the valve / Category 3G or 3D outside the valveII 1GD / 2GD c Category 1G or 1D inside the valve / Category 2G or 2D outside the valve
DIN EN 14460(DN 700-1000)Valve housing resistance to explosion pressure and ignition disrupting resistance against St1 dust explosion in closed position:DN700-800: 9, 6 barDN900-1000:10, 5 bar*IMPORTANT: Pressure rating of the valve refers to maximum working pressure of the valve. The maximum explosion pressure exceeds many times the working pressure, so 94/9/EC limits must always be observed.

The XC model knife gate is a wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the body allows for easy passage of the fluid and makes it ideal for use as silo outlet valve. Widely used in industries such as:

• Power plants
• Food and Beverage
• Chemical plants
• Mining
• Etc.

The valve is normally installed in the reverse position (seat upstream) in order to avoid problems like build-up in valve body, seat wear, difficult closing

Sizes:DN 50 to DN 600 (larger diameters on request)Working pressure:Of seating:DN 50 to 250: 3 kg/cmDN 300 to 400: 2 Kg/cmDN 450: 1, 5 kg/cmDN 500 to 600: 1 kg/cm

On seating:DN 50 to 250: 10 kg/cmDN 300 to 400: 6 kg/cmDN 450: 5 kg/cmDN 500 to 600: 4 kg/cm

Standard flange connection:EN1092 PN10 and ANSI B16.5 (class 150)Note: other flange connections are available on request.

Directives:DIR 2006/42/CE (MACHINES)DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)DIR 94/9/CE (ATEX) Please contact Orbinox for information and availability of categories and zones.

The TL model knife gate is a through conduit wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries such as:

• Pulp & Paper
• Wastewater Treatment Plants
• Power Plants
• Chemical plants
• Etc.

Sizes:
DN 50 to DN 1000 (larger diameters on request)

Working pressure:DN 50 to DN 125: 10 (kg/cm)DN 150 to DN 250: 8 (kg/cm)DN 300 to DN 400: 6 (kg/cm)DN 450: 5 (kg/cm)DN 500 to DN 600: 4 (kg/cm)DN 700 to DN 1000: 2 (kg/cm)
Standard flange connection:EN1092 PN10 and ANSI B16.5 (class 150)
Note:other flange connections are available on request such as:EN1092 PN6/16/25BS D and EANSI 125

Directives:DIR 2006/42/CE (MACHINES)DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)DIR 94/9/CE (ATEX) Please contact Orbinox for information and availability of categories and zones.

In case of failure of the actuator, due to interruptions of compressed air supply or otherwise during maintenance, the Manual Override assists in operating the actuator / process valve.
El-O-Matic MO series declutchable gear operators offer simple and reliable manual positioning of the valves, dampers and other quarter turn devices when overriding existing pneumatic or hydraulic rotary actuators. All El-O-Matic MO units combine rugged construction, light weight and modular design to provide the most efficient and cost effective solution to a full range of manual override requirements.

The self locking worm gear design means safe and easy operation, positive manual positioning and extremely long life. The MO can be adapted to any quarter turn actuator and may even be installed in the field on existing valves.

Five Models cover torque upto 8000 Nm

El-O-Matic supplies switches for indicating the valve / actuator position. The switches are operated by two cams on an extension of the actuator drive shaft. All mechanical parts and the switches are contained within the enclosure. Both switches are independently adjustable throughout the operating stroke, but are normally set to indicate the open or close position. The terminals of the switches are pre-wired to a terminal block which is easily accessible when the top cover is removed. The switch box is mounted on top of the actuator with an accessory bracket.