Ahmedabad, Gujarat, India
Verified
Add Review
Our Products
Y TypeStrainersare essentially a filter with wire mesh as a filtering media. It is used in the process line to filter out any solids larger than the mesh size which are trying to pass through the process line.
This Y Type Strainers are designed for longer service life and high performance even after consistent use in extreme and testing environments of high temperature and pressure.
Y type is suggested to use where the solid % is less in quantity. The dirt or foreign particle holding capacity is less than compared to Basket Strainer. These Strainers are very compact and can be used in horizontal, vertical lines.
BasketType Strainers, the definition of the Basket Type Strainer is A closed vessel with cleanable screen element designed to remove and retain foreign particles. Note the term foreign particles. Basket Strainers do not necessarily remove only dirt.They take out material which is not wanted in the fluid and this can sometime be a valuable product which may be saved.
Basket straineris used where cleaning may occur frequently, it stands to reason that the basket should be able to be removed and replaced as simply as possible. The strainer cover is held down by a clamping yoke which is sturdy enough to hold full line pressure and yet, which can be quickly loosened or tightened by hand. Bolted covers are also furnished with basket strainers and they cost less than yoke covers.
The basic construction of the Diaphragm Valve is quite simple. It is composed of three principal units called Body, Bonnet and Diaphragm. Originally, the diaphragm valve was developed for use in industrial applications. Later on, the design was adapted for use in the bio-pharmaceutical industry by using compliant materials that can withstand sanitizing and sterilizing methods.
Diaphragm valves are particularly suitable for service lines handling Corrosive, Abrasives, Viscous or Fibrous Fluids.
There are numerous combinations available for selecting the most suitable body material, body lining and diaphragm material for a specific service depends on several variables, economic considerations nature of fluid handled, its concentration and corrosiveness, temperature, pressure, velocity and continuity of flow.
Diaphragm life depends not only upon the nature of the fluid handled but also upon the temperature, pressure and frequency of operations.
There are two main categories of diaphragm valves: one type seals over a weir& and the other (sometimes called a full bore or straight-way valve) seals over a seat.
These Valves can be effectively used to handle Pharmaceuticals, Foods, Dairy Products, as well as Beverages & Water Treatment Plants.
Ball Valves are designed and manufactured in accordance with latest international standards like API 6D, API 608 and BS 5351 to provide highest safety, efficiency and accuracy.
Ball Valves regulate and control the flow of various fluids by the process of opening and closing of Valve. The offered Valves are highly demanded in the market for their dimensional accuracy, excellent performance and minimum maintenance.
The AXEGIC Ball Valves are economically priced and designed to last. These Valves provide exceptional performance in even the most stringent applications found in the Oil & Gas industry and other industries. We offer a wide variety of optional seat and seal materials.
We are manufacturing Ball Valves inSingle Piece, Two-Piece & Three-Piececast steel constructions. These Valves are manufactured to the highest possible quality standard. Many of our threaded and socket weld Ball Valves are manufactured according to the ASME B16.34 design standard. These valves provide the exceptional performance in even the most stringent applications found in the Oil & Gas industry and other industries.
Trunnion mounted Ball Valve is engineered under the strict supervision of experienced quality controllers, these are precisely engineered using finest quality materials and many other allied components. These are engineered using best available cutting-edge technology and following international Industrial Standard. These are widely recommended by clients owing to its application specific design, robust construction, longer service life, precise design and consistent performance. These are featured with full bore, Reduce Bore, blow out proof stem, low torque, trunnion mounted design stem for high functional efficiency. Besides all these, these are 100% corrosion resistant and acclaimed for application specific design and corrosion resistance.
Jacketed Ball valves are designed in Single-Piece Welded Jacket construction for Standard Bore Valves. The jacket extends from one flange to other which is generally oversize with face to face dimension of corresponding Valve. The jacket comes in two-piece construction welded together. The jackets of the Valves can be rated for heat transfer media pressure up to 22 bars, In Standard design the jacket is rated at 10.3 bars. The Valve can also be used in FDA / Sanitary Applications. Jacketed Ball Valves to handle highly viscous materials or materials that solidify at ambient temperatures are available for use with steam or another heat transfer media.
Our Fire safe ball valves seats and all packing are designed and manufactured to withstand the maximum temperature. Fire Safe test was conducted as per API 607 standard. We assures highest standard of safety and also offers to supply Valves with third party inspection or customer inspection on request.We have an experience of 3rd Party Fire Safe Test Inspection with DNV, Bureau Veritas, IRS, Tata Projects Ltd. etc.
We provide Pulp Valves that have wrought Pulp Valves and Paper Pulp Valves. These Valves are accepted for its high strength and corrosion resistance.
The Pulp Valve designed specifically for the pulp and paper industry. We have designed and engineered products and features uniquely adapted to pulp and paper processing. These Valves substantially reduce downtime and maintenance costs and consistently outlive their payback period. Through testing and application, we continue to solve countless problems associated with pulping, Pulp Valve Manufacturers, bleaching, dewatering, recovery, paper making, and recycling. Our Valves are designed to provide long life in an industry where life expectancy of equipment is exceedingly low.
We are dealing with welded and seamless buttweld fittings and forged fittings, such as carbon / stainless steel elbows, tees, reducers, caps, pipe bends, dish ends and pipe sleeve as per ASME / ASTM, DIN and other known specifications.
The wide range of products offered by us include Industrial Flanges like Companion slip-on flanges, Threaded Flanges, Weld Neck Flanges, Socket Weld Flanges, Blind Flanges, etc.
The Pipe & Fittings are widely used in Nuclear Power Stations, Power Plants, Paper Manufacturing, Oil Refineries, Petro Chemical Plants and other Gas Pipeline Projects.
We are always focus on providing high-quality and high-performance fittings.
Forged Steel Lift Check Valves Bolted Type and have body guided piston assuring accurate return to seat ring to achieve leak tightness. This Check Valves are suitable for only Horizontal Line.
