Write a Review
Our Products
We offer a complete product range of Fluid Bed Dryer and Tray Dryer
The use of Fluid-Bed technique on industrial scale, has been considerably on the increase, specially for drying, cooling, calcination, agglomeration, combustion and in many other unit operations, due to its manifold advantages.
Compared to conventional batch and other continuous drying method, Fluid-Bed technology offers several advantages such as, no product lump formation / caking, no particle overheating/ cooling, a well defined product residence time, uniform product quality, better energy economy due to lower specific heat requirements etc.,
In Fluid-Bed" the material is uspended in an upward moving hot-air and the mass behaves like a boiling fluid after "Fluidization".
Thus Fluidization is basically a state of dynamic balance of solids in fluid. Quantity of fine solids in a form of bed are placed on a distributor plate and hot air is passed slowly.
Special Features :
In compliance with cGMP guidelinesModular DesignUniform Drying with reducing Drying timeQuick Dismantling of Dutch Sieve & Perforated Sheet at the Product containerOnline Sampling DeviceFully Automatic Operation through Programmable Logic Controller (Optional)Product Container with Stirrer (Optional)Flameproof Construction (Optional)
| Model |
APT-SFBD15 |
APT SLEFBD 30 | APTSFBD 60 | APTSFBD 120 | APTSFBD 200 | APTSFBD 300 | APTSFBD 400 | APTSFBD 500 | APTSFBD 600 |
| Container Gross Volume Ltr. | 46 | 71 | 142 | 280 | 475 | 650 | 870 | 1055 | 1350 |
| Max. Batch Capacity (0.5 bd) Kg | 10 to 15 | 20 to 30 | 40 to 60 | 80 to 120 | 160 to 200 | 200 to 300 | 300 to 400 | 400 to 500 | 500 to 600 |
|
Blower Motor HP** |
5 | 7.5 | 10 | 20 | 25 | 30 | 40 | 50 | 50 |
| Air Flow(CFM) ± 10 % | 430 | 706 | 1060 | 1880 | 2590 | 3235 | 3825 | 4000 | 4705 |
| Steam Pressure (Kg/cm2) | 3.5 | ||||||||
| Steam Consumption (Kg/Hr) | 30 | 50 | 80 | 140 | 216 | 250 | 288 | 344 | 384 |
| Electric Heater (KW) | 20 | 20 | 36 | 60 | N.A. | N.A. | N.A. | N.A. | N.A. |
| Compressed Air Pressure (bar) | 6 | ||||||||
| Drying Temp (°C) | 35-80 | ||||||||
| Power Supply | 415 V ± 10 %, 3 Phase, AC | ||||||||
| ** The blower motor of higher capacity will be required in machine if supplied with HEPA, Scrubber & ducting length above 5 meters. | |||||||||
Construction :External : 2MM Thk, Internal : 2MM THKMOC: cGMP
Surface Finish:External:Buffed to 150 grit matt finish, INTERNAL: Buffed to 220 grit mirror finish.
Inlet & Outlet :All dryers have a 5 micron prefilter at the inlet and a manually infinite adjustable damper at the outlet.
Door :Door is provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.
Air Circulation :Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity , static & design depends on the size and model of dryer.
Heating :Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers.
Temprature Control :Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
Trays :Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropelene / Frp/ M.S. galvanized as per clients reqiuirements.
Trolley :Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.
Control Panel :Automatic Control panel is fitted on the side of the dryer. If consists of starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
Aysu Pharma Tech (Aysu Pharma Tech)
#15, SRI ABRAMI GARDAN, UNNAMALAICHETTY CHAVADI KONDUR -POST, , Cuddalore, Tamil Nadu - 607006, India
Share us via
