B & COMPANY Ernakulam, Kerala

3M™ VHB™ Structural Glazing Tape is a two-sided pressure sensitive acrylic foam tape designed to bond glass to metal frames in glass curtain wall systems. These tapes are specifically designed to withstand the stresses and performance requirements faced in 4-sided unitized shop glazed curtainwall. 3M™ VHB™ Structural Glazing Tapes have been used worldwide in thousands of glazing applications in the construction industry. To further support consideration for structural glazing applications, performance tests were conducted at an independent, accredited 3rd party test facility

Warning Tape (Barricade tape) is brightly colored tape (often incorporating a two-tone pattern of alternating yellow-black or red-white stripes or the words "Caution" or "Danger" in prominent lettering) that is used to warn or catch the attention of passersby of an area or situation containing a possible hazard. It acts as a minor impediment to prevent accidental entrance to that area or situation and as a result enhances general safety. Barricade tape is also known asconstruction tape or barrier tape or in reference to the safety hazard involved as caution tape, warning tape, danger tape or hazard tape. In case the tape is used by an organization the tape is named police tape, firefighter tape or traffic control device tape.

High-tack, pressure-sensitive acrylic adhesive on one side of a strip of urethane or vinyl foam bonds the foam to most surfaces. For gasketing, sealing, baffling, cushioning and insulation. Select varying thicknesses of high- or low-density open cell urethane, and high- or medium-density closed cell vinyl.

Double-sided tape  is any pressure-sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater-looking projects and better craftsmanship. Double-sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect. Double-sided tape is created by applying a thin adhesive layer to each side of a carrier material. For example, double-sided tissue tape, an easy-to-rip double-sided tape, is created by applying adhesive to two sides of tissue paper, which is then wound with a siliconed paper to avoid it sticking to itself. Most adhesive tapes are manufactured in log form, such as a large 1 to 3 meter wide roll, and then an adhesive tape converter is used to slit the rolls into the required widths. One type of double-sided tape, known as lingerie tape, secures clothing to skin, and is used with strapless dresses or loose skirts, and as a temporary fix for fallen hems and other clothing imperfections.

Thread seal tape is a polytetrafluoroethylene (PTFE) film cut to specified widths for use in sealing pipe threads.Thread seal tape can be used in many ways, the most common of which is to seal pipe threads. Also known as plumber's tape, PTFE tape, tape dope, or popularly but incorrectly as Teflon (A Dupont trade name) tape. In use, the tape is wrapped around the exposed threads of a pipe before it is screwed into place. The tape is commonly used commercially in pressurized water systems, such as central heating systems, as well as in air compression equipment and thread joints with coarse threads. One of the defining characteristics of PTFE is how good it is at defeating friction. The use of PTFE tape in tapered pipe threads performs a lubricating function, which more easily allows the threads to be screwed together, to the point of deformation, which is what creates the seal.

Filament tape or strapping tape is a pressure sensitive tape used for several packaging functions such as closing corrugated fiberboard boxes, reinforcing packages, bundling items, pallet unitizing, etc. It consists of a pressure sensitive adhesive coated onto a backing material which is usually a polypropylene or polyester film and fiberglass filaments embedded to add high tensile strength. It was invented in 1946 by Cyrus W. Bemmels, a scientist working for Johnson and Johnson. A variety of grades of filament tape are available. Some have as much as 300 pounds of tensile strength per inch of width. Different types and grades of adhesive are also available. Most often, the tape is 12 mm (approx. 1/2 inch) to 24 mm (approx. 1 inch) wide, but it is also used in other widths. A variety of strengths, calipers, and adhesive formulations are available.