Delhi, India
Verified
Add Review
Our Products
Cutter Pump
Dirty water Pump with Cutter system
Performance Range
Operation Limits
Working Performance
V Pumps are submersible vortex pump for dirty water, designed mainly for domestic use and industrial use. Their operating principle is that of a centrifugal pump with a retracted vortex impeller. A large size ring chamber with a threaded delivery opening is machined in the pump body and closed by a cover, housing the suction opening, which is shaped to prevent suspended solids over a certain size from entering the pump. Since the impeller is retracted with respect to the cover, water entering the front chamber lying between these two components assumes a vortex motion and is centrifuged in to the ring chamber leaving the pump via the delivery opening.
Pump Installation and Application
V pumps are designed to lift dirty water which is not chemically aggressive to the pump components. In all cases where suspended solids up to 35mm have to be dealt with. Recommended applications therefore include draining flooding in confined areas such as basements and garages also pumping domestic waste and the disposal of waste water containing fibers matter and are also widely used in many factories. These pumps are easy to install and dependable when used automatically in fixed installations. This system with float switch automatically starts the pump when the fluid reaches a pressure level, stopping it once the fluid has been emptied. Installing a suitable non return valve on the delivery pipe prevents reverse flow when the pump stops.
Structure Characteristics
Technical Specifications
|
Model Pump |
Power |
Q M3/h |
0 |
3 |
6 |
9 |
12 |
15 |
18 |
21 |
24 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Single Phase, Three Phase |
KW |
HP |
L/min |
0 |
50 |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
|
V1100D(F) V1100D |
1.1 |
1.5 |
H |
7 |
6.7 |
6.2 |
5.4 |
4.3 |
2.8 |
/ |
/ |
/ |
|
V1300D(F) V1300D |
1.3 |
1.75 |
M |
12 |
10.6 |
10 |
8.5 |
6.5 |
4.4 |
2 |
/ |
/ |
|
V1800D(F) V1800D |
1.8 |
2.5 |
|
10 |
9.5 |
8.8 |
8 |
7 |
5.9 |
4.8 |
3.5 |
2.8 |
Cast Iron Sewage Vortex Pump
BLAIRS Sewage submersible Pumps are ideal for pumping drainage water, sewage or waste water or nuisance water. These pumps are outstanding for their reliability in fixed installations with automatic operation. Exceptional sturdiness even under severe working conditions also featured by its long durability and safety with stable performance curves
APPLICATION
BLAIRS Sewage submersible pump is extensively used in dirty water, designed mainly for industrial and civil fields, sewers, galleries, excavation sites, wells, channels, underground car parks and architectural operations. They are also recommended for draining dirty water in domestic and civil sectors.
WORKING PRINCIPLE
BLAIRS Sewage submersible pumps are allowed to pump liquids containing suspended solid bodies with dimensions up to 35 mm and short fibers. Pumps are made of hard alloy and reliably well-sealed and equipped with overheat & overload protection devise,
CSCP (Cast-iron Sewage double-channel) Pump is equipped with a double-channel impeller.
CSVP (Cast-iron Sewage vortex Pump) Pump is equipped with a VORTEX pumps.
PERFORMANCE RANGE
Flow rate up to 1083 I/min. (65m3/h) Head up to 30 m
OPERATING LIMITS
STRUCTURAL FEATURE
MOTOR
echnical Specifications
|
Model |
Volt |
Size |
Power |
Q m3/h |
0 |
3.5 |
7 |
10.5 |
14 |
20 |
25 |
30 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
(V) |
MM |
KW |
HP |
1/min |
0 |
58 |
117 |
175 |
233 |
333 |
416 |
500 |
|
CSCP 6-12-0.55 |
180-240 |
35 |
0.55 |
0.75 |
H (m) |
17 |
14.3 |
12 |
9 |
7.5 |
3 |
|
|
|
CSCP -16-0.75 |
180-240 |
35 |
0.75 |
1 |
|
21 |
18.4 |
16 |
13 |
11 |
6 |
3 |
|
|
CSVP 10-10-0.75 |
180-240 |
50 |
0.75 |
1 |
|
14 |
14.5 |
13 |
11 |
9 |
6.5 |
4.5 |
|
|
CSVP 7-15-1.1 |
180-240 |
35 |
1.1 |
1.5 |
|
18.4 |
17 |
15 |
14 |
13 |
11 |
7 |
|
|
CSVP15-10-1.5 |
18.-240 |
50 |
1.5 |
2 |
|
10 |
15 |
14 |
12.5 |
11 |
9.5 |
5.5 |
|
|
CSVP 10-7-0.55 |
300.440 |
35 |
0.55 |
0.75 |
|
9.5 |
8.5 |
8.1 |
7 |
4.5 |
|
|
|
|
CSVP 10-10-0.75 |
300-440 |
35 |
0.75 |
1 |
|
14 |
14.5 |
13 |
11 |
9 |
6.5 |
4.5 |
|
|
CSVP 15-10-1.5 |
300-440 |
65 |
1.5 |
2 |
|
13 |
12 |
11.8 |
11 |
10.5 |
|
|
|
|
CSVP 15-20-2.2 |
300-440 |
65 |
2.2 |
3 |
|
25 |
24 |
22 |
21.8 |
20.5 |
17.5 |
16 |
|
Stainless Steel Multistage Pump
BLAIRS Stainless-steel Multistage booster Pump is an equipment to achieve the right water resource/pressure. The automatic pressure systems are designed to automatically start and stop the pump on opening and closing of taps. Pressure booster Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank, a pressure adjustable switch, dry running protector and a 3 or 5 ways connection in stamped brass. These pumps should be installed in a covered area, protected against the weather. They are very silent and reliable.
BLAIRS Stainless-steel Multistage pump is designed with advanced features such as the leakage-free design and fully stainless steel materials for rust-free operation without affecting your water quality. These pumps provide silent, strong & comfortable for water pressure all the time. They assure you the best water pumping performance for your applications, higher in efficiency and easy to operate Stainless-steel pumps. Featured with flat curves and construction in SS assures safe drinking water. Multistage design of the pump with high accuracy allows high head with lower motor capacity, which is ideally used for all high-pressure applications. The most exceptional merit of these SS Pumps is that it's all wetted parts and casings including suction and delivery casing are made of stainless steel AISI 304 and 303.
APPLICATION
Pumps are suitable for pumping water in Industries, Cooling systems, Aqua farming, Water treatment, Circulation of hot Water, Pumps on Water Treatment Plants, RO, DM Water Plants, Marine Water Handling, Fertilizing - metering & dosing applications.
PERFORMANCE RANGE
Max. Flow rate up to 60 M3/hr (1000 ltr/min)
Head max up to 230 M.
OPERATING LIMITS
Temperature ranges of 0 C to +110 C.
Single mechanical seals very easy to interchange.
STRUCTURAL CHARACTERISTICS
MOTOR
We are listed amongst the renowned organizations in this domain, affianced in offering a superior quality range ofSingle Vane Sewage Pumps. The provided pumps are manufactured under the direction of our experts using prime quality components and the advanced technology at our sophisticated manufacturing unit. Widely used for pumping sewage that comprises high content of dirt, these pumps are checked on various parameters of quality. Moreover, our clients can avail theseSingle Vane Sewage Pumpsat nominal prices.
Features:
| Pump Model | Power | Q m3/h |
0 | 3 | 6 | 1 | 12 | 15 | 18 | 21 | 24 | 30 | |
| KW | HP | 1/min | 0 | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | |
| SVS 75 | 0.55 | 0.75 | H (m) | 9 | 8 | 6.5 | 5 | 2.5 | 1 | ||||
| SVS 100 | 0.75 | 1 | 10 | 8.7 | 7.5 | 6.5 | 5.6 | 4.8 | 3.9 | 2 | |||
| SVS 150 | 1.1 | 1.5 | 12 | 10.7 | 9.5 | 8.7 | 7.8 | 6.8 | 5.9 | 4.3 |
|||
