Ahmedabad, Gujarat, India
Verified
Add Review
Our Products
A handy Metric or English convertable depth gauge. The set consist of one head and two stainless steel rulers; one metric, the other English. Either one can be easily slipped and locked in to the slot. The rules can be used separately, If desired. Metric graduation in 1/2 millimeters; English in 64ths. Each set individually packed in PVC covers.
Additional Information:
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
Additional Information:
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
Additional Information:
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
It measure a depth from top bottom of bottomed holes, a depth of narrow grooves,
a value of step height of stepped surfaces and a depth of types engraved in matrices.
The dial gauge furnished offers a correct measured value since it can measure an
object under measurement with a given measuring force.
Made of hardened steel & finely ground. Chrome finish. Kristeel drill gauges are for quick & convenient identification of drill bit sizes. The Hole sizes & their corresponding decimal equivalent are marked on the gauge.
| Model | Range | Holes |
| A | 1/16"-1/2" | 29 |
| B | 1 to 60 | 60 |
| C | 1.5mm to 12.5mm | 30 |
This gauge is used to check flatness & gap between mating parts.
Range : 0.001" to 0.025" (English / Metric Model) (27 Blades)
Blade length - 3"
This set is mainly used to check the radius of concave and convex portion of any radial part. This gauge is useful in workshops, general purpose, tool and die makers, woodworking industries, quality department etc. The gauge is packed in PVC pouch with brass handle to hold the leaf while checking. The accuracy of the product is equivalent to international standards.
Marking Gauge is used for marking on steel/wooden plates ec. It has a stopper which starts from the zero graduation. It is provided with a knob arrangement which can be locked to precisely check a certain linear measurement.
This small pocket sized stainless steel gauge is designed to identify the condition of Pipe like Depth of Pit, Pipe thickness etc. Useful for Pipe Welders, Pipe Coaters, Pipe manufacturers etc. Gauge includes 110mm long scale in Metric and Inch. Conversion Table available on back side and formulas on top.
This product is available in different models. Common models are the 28 leaves 4-80 pitch, 30 leaves 4-42 pitch, and 30 leaves 3.5-60 pitch-55 degrees whitworth. Narrow leaf design allows checking both external and internal threads -even in small holes not accessible with wide leaf type gauges.
This gauge is made of aluminum material. It Accurately sets Turning, Boring & Facing Tools on the Centerline of the work piece. All edges of the Tools Setting Gauge V-body are accurately machined and may be used for vial calibration to suit your intended use. The Vial body may be positioned on either side of the V-body for easier use in different applications. This tool is also used to set up grinding wheel on centerline of tooth rest for cutter grinding. It is also used to set table stops on horizontal mills. The gauges can be used to set the bed at different angles. (0oto 60oin increments of 15o)
This Polish Finish rugged gauge is made of stainless steel material 0.8mm thick This gauge is useful to spindle turner & Wood workers for turning a work piece to the desired diameter, from 1/8" to 1". Wood workers will find many uses for the gauge such as measuring the thickness of wood and plywood, checking the size of a Tendon and Dado cut or sizing commercial Dowels. Each gauge is packed with printed card in Blister.
This rugged gauge is fabricated in stainless steel & allows fast, accurate measurement of 11 fillet weld sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16'/ , 5/8, 3/4, 7/8, and 1" and their metric equivalent. Also used to 2 determine weld size, either concave or convex. Each blade is made of 1.25" x 4" cold rolled stainless steel to resist rust and bending. The blades are deburred to remove rough edges. The set of seven blades is packed in a handy 2" x 2.5" pocket case with the "user manual attached for easy reference.
WELD FILLET GAUGEA versatile tool for the use of welding operator. The tool can be used with ease for weld joint preparatory functions as well as for checking of the weld joint. The tool combines a bore gauge, angle gauge, depth gauge & weld height gauge. The tool is made in stainless steel with polish finish.
This new model is made of hardened and tempered stainless steel material in polish finish. It measures thread depth of tyres. The plastic sliding knob holds the vernier scale at any point. It is enough tight to avoid self sliding. Each gauge is packed in PVC pouch.
Range
TDG-S(0-50 mm)
TDG-B(0-100 mm)
Least Count: 0.1mm.
Constant Pressure Thickness Gauges can be made to comply with JIS by attaching
exact weights that create the specific pressures needed to measure different materials.
Three types ( FFG. FFA. FFD series ) are available to meet your measurement.
This Hard Chrome Plated Guage is used to measure the ACME Threads for setting of cutting tool. This gauge is used to set the quick change gearbox to required number of threads per inch & also to set Compound rest 14.5oto the right. (half the included thread angle.
A very handy tool to measure length and diameter of rivet. It is made of stainless steel with polish finish. The rivet gauge is a very handy tool for an operator and a good inspection gauge for the rivet manufacturer. The gauge is available for diameter upto 5mm and length upto 35 mm.
This Gauge Is Used In Diamond Industry. The Measuring Points Are Matched Perfectly For Best Accuracy. The Gauge Due To It's Good Quality Has A Very Long Life.
This Gauge Can Also Be Used To Measure Sheets Of Plastic, Leather , Rubber, Wood, Cardboard, Metal Etc.
This Gauge Beacuse Of It's Small Size Is Very Handy & Can Be Carried Anywhere In A Pocket .
Additional Information:
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
Additional Information:
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
Additional Information:
Packaging Details : Qualitative and safe packaging.
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
Additional Information:
Packaging Details : Qualitative and safe packaging.
Delivery Time : Delivery immediate or within 2 days / subject to availability in some cases.
A Gauge developed specifically to monitor compliance with safety requirements for minimum trade depth of automobile tyres. Additionally, it is useful for gauging general tyre wear in the range of 0-8 mm.
FEATURES:| TTG01 | 0.1mm | 8mm | 8 - 0 |
| TTG02 | 0.004 in. | 0.32 in. | 0.32 - 0 |
This gauge is made of hardened & tempered stainless steel material 0.5 mm thickness. This is a very handy tool used to measure the Gear Diametrical Pitch for 14.5 pressure angle (Tooth profile - Involute type) This gauge has 14 Blades duly fine edge profiled, Numbered pitch sizes are mentioned on each blade. it is very useful gauge for all gear manufacturers for inspection purpose. it is packed in a plastic box with gear data sheet (DP, CP, Tooth Thickness Data) provided for instant reference.
Range: 6 to 80 DP. (22 Pitches)
Available in :- 1) Diametral Pitch 2) Metric Module Pitch (At 20 Pressure Angle)
Additional Information:
Delivery Time : ex.
