Our DISS medical gas outlets incorporate several design features which make them superior to our competitor’s outlet designs: Frontall™ front-loaded feature – easy to service, saving time and money Double O-ring seal between the front and back bodies support 10 lbs at 2 inches without leaking Double O-ring seal may be replaced without having to shut down the gas service Durable, protective, scratch resistant vinyl label Brass secondary check poppet (not plastic)   FEATURES OF DISS MEDICAL GAS OUTLETS   The Frontall™ DISS medical gas console, medical gasheadwall outlets, medical gas terminal units represent the most technically advanced means of providing medical gas connections to the central piping system. The outlets incorporate a unique front-loaded valve cartridge feature which makes our medical gas outlets easy to repair, saving valuable time and money for the health care facility.   ETL Listed to UL 1331 and CSA Z9170-1. Conforms to NFPA 99 and CGA standards Accepts DISS gas specific nut & nipple sets Ease of maintenance without removing the faceplate using a cartridge insertion tool. Pin indexed faceplate and back Removable front assembly All outlets are 100% tested for flow and leaks 360° swivel inlet tube 14 gauge metal back and nameplate Provides support for dispensing equipment without the use of additional brackets

Double O-ring seal between the front and back bodies support 10 lbs at 2 inches without leaking Double O-ring seal may be replaced without having to shut down the gas service Durable, protective, scratch resistant vinyl label Brass secondary check poppet (not plastic) ALLIED / CHEMETRON MEDICAL GAS OUTLETS FEATURES ETL Listed to UL 1331 and CSA Z9170-1. Conforms to NFPA 99 and CGA standards Accepts Allied Chemetron gas specific compatible male adaptors Gas specific indexing Removable front assembly All outlets are 100% tested for flow and leaks Nameplate color coding per NFPA 99 360° swivel inlet tube Metal back and nameplate Strength of connections provides support for dispensing equipment without the use of additional brackets.

Benson Medical area alarms panels are designed with state of the art technology for the utmost in safety and reliability.   Up to 16 gas models per panel Transducers may be remotely installed up to 5, 000 feet Do not require recalibration Built-in History feature System alarms for disconnected or cross-connected transducer, transducer failure   Medical Gas Area Alarms P anel Features:   The Benson  medical gas alarm panel digitally displays gas pressure and monitors and displays normal and alarm conditions for up to 16 medical gases. Transducers are included and may be mounted in the alarm back box or remotely. ETL listed to UL-1069 and CSA-C22.2 No. 205 Complies with NFPA 99. Made in the U.S.A.  Individual 2.85″ LCD touch screen display for each gas service  Emergency preparedness instructions may be input for each gas service and will be displayed during an alarm event Optional Ethernet board (may be added after installation) provides; text or email notification to 5 mobile devices of an alarm event, website with real-time graphic of alarm panel status with access to event logs, event log for up to 1, 000 events, modbus interface gateway for communication with facilities building management system.  Self-diagnostic (test button) and error message display for ease of maintenance.  Audio and visual alarm indicators  Up to 4 area/gas boards in a two, 8 in a three slot and 16 in a 5 slot panel.  Constant display and monitoring of each gas  User programmable high/low set points  Dry contacts for remote monito ring of all alarm conditions on each gas module and on the CPU module for the entire panel  Alarm history display of previous alarm conditions  Easy to read – color coded gas modules  Hinged frame with lanyards for easy accessibility   Five year parts and one year labor warranty

Rely on Benson Medical Inc. to provide you with the right medical gas ball valves with extensions for your application!   Features of Medical Gas Ball Valves NFPA 99 compliant – 3 piece, full port ¼ turn Dual ported Includes type K copper extensions and locking handles Sizes ½” – 4″ Working pressure rating of 600 psi WOG (29 in/Hg vacuum) Cleaned for use with oxygen in accordance with CGA G-4.1 Meets NFPA 99 standard 3 piece in-line easy to service Dual gauge/purge ports1/8 FNPT Full port ¼ turn ball valve Cleaned for Oxygen service Adjustable packing with blow-out proof stem Working pressure rating of 600 psi WOG (29 in/Hg vacuum) Conforms to MSS SP-110 Available in sizes ½”–3” Bronze body Type K copper tube extensions Optional locking handles available 100% tested Made in the U.S.A. Five year warranty

Genesys™ manifold systems lead the industry in reliability and innovative features: transducers instead of pressure switches, 400 psig pressure differential rated solenoid valve(s), easy to service 2D layouts and union fittings before and after all serviceable components. In addition they are designed to allow the manifold cabinet to be converted in the field (i.e.- from standard flow to high flow or from cylinder by cylinder use to liquid by cylinder or liquid by liquid). These design features: improve safety, reduce gas manifold system costs, make the units easy to service and provide the utmost in reliability. Fully automatic–no resetting of valves or levers Input power 120 VAC, 50 to 60 Hz-single point connection 400 psig differential rated solenoid–can’t lock up 72” fle xible pigtail (for portable bulk or bulk connection) Economizer circuits for maximum efficiency of gas use Unit of measure switching (psi, kPa, BAR). Dual line pressure regulators Built for expansion by adding header extensions. Cabinet weight 75 lbs. May be converted from low or medium pressure liquid portable bulk vessel use to use with high pressure cylinders. Line pressure sensor may be mounted inside the cabinet or remotely located to eliminate the need for a high/low pressure switch for master alarm operation Five year warranty

The Ward Vacuum Unit Unit has been on the market for almost 20 years. The design has now been superseded by the Diamond Range Suction, but the old style Suction remains available. The Unit is available in three types- High – 0 to -80 kPa Low – 0 to -20 kPa Thoracic – 0 to -4 kPa All types are available either with Direct or Rail Mounted fittings All can be used with any type of Suction Collection Jar The High and Low models are supplied with a Hydrophobic Pipeline Protector, for pipeline contamination protection. The Thoracic unit is supplied with a standard filter and float The units are supplied with a seven year warranty The unit is CE Marked A New for Old service is available to all UK Hospitals to enable the exchange of old units at advantageous prices

• Country of OriginOther
• MaterialStainless Steel
• UsageHospital
• Packaging TypeCarton Box, Wooden Box
• PressureLow Pressure, Medium Pressure, High Pressure

The Ward Vacuum Unit Unit has been on the market for almost 20 years. The design has now been superseded by the Diamond Range Suction, but the old style Suction remains available. The Unit is available in three types- High – 0 to -80 kPa Low – 0 to -20 kPa Thoracic – 0 to -4 kPa All types are available either with Direct or Rail Mounted fittings All can be used with any type of Suction Collection Jar The High and Low models are supplied with a Hydrophobic Pipeline Protector, for pipeline contamination protection. The Thoracic unit is supplied with a standard filter and float The units are supplied with a seven year warranty The unit is CE Marked A New for Old service is available to all UK Hospitals to enable the exchange of old units at advantageous prices

Benson Medical master alarm panels are designed with state of the art technology for the utmost in safety and reliability. Up to 128 alarm points per panel (8 points per circuit board) Alarm points may be programmed individually, NC or NO or Disabled Datafile of NFPA 99 alarm labels pre-loaded into each board Design options available to communicate with dry contact, transducer and 4 – 20 mA sensors  Wireless master alarms available Built-in history feature Five year parts and one year labor warranty

Genesys™ manifold systems lead the industry in reliability and innovative features: transducers instead of pressure switches, 400 psig pressure differential rated solenoid valve(s), easy to service 2D layouts and union fittings before and after all serviceable components. In addition they are designed to allow the manifold cabinet to be converted in the field (i.e.- from standard flow to high flow or from cylinder by cylinder use to liquid by cylinder or liquid by liquid). These design features: improve safety, reduce gas manifold system costs, make the units easy to service and provide the utmost in reliability. Fully automatic–no resetting of valves or levers Input power 120 VAC, 50 to 60 Hz-single point connection 400 psig differential rated solenoid–can’t lock up 72” fle xible pigtail (for portable bulk or bulk connection) Economizer circuits for maximum efficiency of gas use Unit of measure switching (psi, kPa, BAR). Dual line pressure regulators Built for expansion by adding header extensions. Cabinet weight 75 lbs. May be converted from low or medium pressure liquid portable bulk vessel use to use with high pressure cylinders. Line pressure sensor may be mounted inside the cabinet or remotely located to eliminate the need for a high/low pressure switch for master alarm operation Five year warranty

A range of Electric Suction Units generally mounted on Castors with a large handle containing a Catheter Park The Suction Valve is of the modern design which allows full adjustment of vacuum by means of a control mechanism, as against the old atmospheric venting system. The unit cannot operate without a Hydrophobic Filter. This prevents potential; contamination of the electric motor, if the jar is overfilled or the unit is operated incorrectly. The unit is available in Mains, Battery, or Mains/Battery mode, and can be supplied with either 240V or 110V motors The standard mains model operates within the suction range 0 – 80 Kpa The model comes with a single or Twin Suction Jar. The Suction is controlled by means of an adjustment bonnet The unit is supplied with a two year warranty The unit is CE Marked  

Rely on Benson Medical Inc. to provide you with the right medical gas ball valves with extensions for your application!   Features of Medical Gas Ball Valves NFPA 99 compliant – 3 piece, full port ¼ turn Dual ported Includes type K copper extensions and locking handles Sizes ½” – 4″ Working pressure rating of 600 psi WOG (29 in/Hg vacuum) Cleaned for use with oxygen in accordance with CGA G-4.1 Meets NFPA 99 standard 3 piece in-line easy to service Dual gauge/purge ports1/8 FNPT Full port ¼ turn ball valve Cleaned for Oxygen service Adjustable packing with blow-out proof stem Working pressure rating of 600 psi WOG (29 in/Hg vacuum) Conforms to MSS SP-110 Available in sizes ½”–3” Bronze body Type K copper tube extensions Optional locking handles available 100% tested Made in the U.S.A. Five year warranty