Write a Review
Our Products
We offer the best product range of Cross Hatch Cutter.
Made By : Imported
Cross Hatch Cutter
Introduction
Cross hatch tester is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate.
When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.
Packing List
2.11 X CarryingCase
2.21 X Cross Hatch Cutter & Handle ,
either :11mm spacing, 6 teeth
Or21mm spacing, 11 teeth
Or31.5 mm Spacing, 6 teeth
Or42mm spacing, 6 teeth
Or63mm spacing, 6 teeth
2.31 X Magnifier ( 5X)
2.41 X Tape ( 3M )
2.51 X Soft Brush
Specification
The Cross cutters Tester conform with the requirements of :
ISO2409-1992
GB/T9286-98
BS3900 E6
|
Order No. |
Substrate |
Coating Thickness (µm) |
|
1 |
Hard |
0 ~ 60 |
|
2 |
Hard |
0 ~ 60 |
|
3 |
Medium Hard |
0 ~ 60 |
|
4 |
Hard and Soft |
61 ~ 120 |
|
6 |
Hard and Soft |
121 ~ 250 |
Sandeep Gupta (Bhagwati Hardware & Mill Store)
4769, Old Post Office Building,Near Chawari Bazar Metro Station,Hauz Quazi, Delhi -110006, (India), Chawri Bazar - 122001
Share us via
