Write a Review
Our Products
We offer the best product range of Electric Immersion Heater.
Copper Tubes
Nicrome wire
Insulation Powder (MgO)
Brass Flanges, Screws and Nuts
Cut length copper tube
Nicrome wire is wound like a coil on the coiler and terminal pins are spot welded on both ends
The Coil is stretched inside the copper tube co-axial to the copper tube and cap is provided at one end and placed on to the filling machine and Insulation powder is filled through and the other end is closed with plastic cap and all pipes are removed in a batch.
Squeezing
Hot Annealing
Bending
Brass Flange Brazing
Cleaning and Boring
Nickle Plating
Assembly
Each Heating element is wrapped in polythene cover and packed in a corrugated box and as per customer requirement
| Heating Element | Thermostat | Immersion Water Heater |
|---|---|---|
| IS - 4159 | IS - 3017 |
IS - 368
|
| Sl.No | TESTS | SPECIFICATION |
|---|---|---|
| 1 | Rating | 230V,2000W,50 Hz |
| 2 | Visual Examination | As per IS-4159 |
| 3 | High Voltage test | At 1500V for 5 sec |
| 4 | Input (at 230 V) | 2000W (+5% , -10%) |
| 5 | Leakage Current | 210 µ amps Max |
| 6 | Moisture resistance | Electric strength at 1250V for 1Min |
| 7 | Temperature Rise | At terminal 75 ° C Max At Room temp 24 ° C |
Bhagyanagar India Limited (Bhagyanagar India Limited)
5th Floor,Surya Towers, S.P.Road
Secunderabad-500 003 Telangana, SP Road - 500003, India
Share us via
