GST : 27ANHPB6785D1ZY
Write a Review
Our Products
Our Complete range of products are 'A' Grade Bauxite Powder, Super 'A' Grade Bauxite Lumps, High Grade Bauxite, B Grade Bauxite Powder and Super 'A' Grade Bauxite.
Additional Information:
Payment Terms : T/T
Packaging Details : Jumbo bag packing of 1 M.Ton with or without Pallet.
Delivery Time : 7 days
Bauxite is Generally Extracted By Open Cast Mining from Strata, Typically Some 4-6 Metres Thick Under a Shallow Covering of Topsoil and Vegetation. in Most Cases the Topsoil is Removed and Stored.
Our Product Analysis Reports
| Parameters | |
|---|---|
| Aluminium Ore(Al2O3) | 50 - 55 % |
| Iron Ore (Fe) | 5-10 % |
| Silica Ore (SiO2) | 2- 5 % |
| Loss on Drying @ 105oC | 2 - 5 % |
| Loss on Ignition @ 950oC | 27.20 |
Bauxite is a naturally occurring, heterogeneous material composed primarily of one or more aluminum hydroxide minerals, plus various mixtures of silica, iron oxide, titania, aluminosilicate, and other impurities in minor or trace amounts. The principal aluminum hydroxide minerals found in varying proportions with bauxites are gibbsite and the polymorphs boehmite and diaspore. Bauxite are typically classified according to their intended commercial application: abrasive, cement, chemical, metallurgical, refractory, etc.
Dolomite Powder is the limestone powder with composition of CaCO3 and MgCO3 pertaining to 100% in combination, the proportion being varied as per mining zone. Dolomite Powder is also being used as Fillers by detergents, steel, paints and ceramics. We are basically supplying huge amount of Dolomite Powder to different industries like Detergent industries. We process Dolomite Powder about 20 microns
Unlike the Base Metal Ores, Bauxite Powder Does Not Require Complex Processing Because Most of the Bauxite Mined is of An Acceptable Grade or Can Be Improved By a Relatively Simple and Inexpensive Process of Removing Clay. in Many Bauxites Ore, Clay is Removed By Some Combination of Washing, Wet Screening and Cycloning, Even By Hand Picking or Sorting.
Additional Information:
Payment Terms : T/T
Packaging Details : 1 MT Standard Jumbo bags with or without pallets
Delivery Time : 15-20 days
100% ANALYSIS REPORT
| Sr. No. | Parameter | Results | Unit |
|---|---|---|---|
| 1 | Al2O3 | 63.8 | % |
| 2 | Iron (Fe) | 0.86 | % |
| 3 | SiO2 | 1.83 | % |
| 4 | Sodium (Na) | 0.020 | % |
| 5 | Potassium (K) | 0.0074 | % |
| 6 | Calcium (Ca) | 0.0206 | % |
| 7 | TiO2 | 1.2 | % |
| 8 | Magnessium (Mg) | 0.003 | % |
| 9 | Chloride | 0.004 | % |
| 10 | Sulphate | 0.002 | % |
| 11 | LOI at 900o | 27.88 | % |
| 12 | Moisture | 1.57 | % |
Bauxite is a Naturally Occurring, Heterogeneous Material Composed Primarily of One or More Aluminum Hydroxide Mineral, Plus Various Mixtures of Silica, Iron Oxide, Titania, Aluminosilicate, and other Impurities in Minor or Trace Amounts. the Principal Aluminum Hydroxide Minerals Found in Varying Proportions with Bauxite are Gibbsite and the Polymorphs Boehmite and Diaspore. Bauxite are Typically Classified According to Their Intended Commercial Application: Abrasive, Cement, Chemical, Metallurgical, Refractory Etc.
Our Product Analysis Reports
| Parameters | Super |
|---|---|
| Aluminium Ore(Al2O3) | 50 - 55 % |
| Iron Ore (Fe) | 2 - 5 % |
| Silica Ore (SiO2) | 5 - 10 % |
| Loss on Drying @ 105 oC | 8.80 |
| Loss on Ignition @ 950oC | 28.61 |
We Manufacture Calcite Powder of Purity Ranging from 93% to 99% Caco3, to Cater the Demand and Specifications of Our Valued Customers. We Process Calcite Up to About 16 Microns
Our Product Analysis Reports
| Parameters | Percentage |
|---|---|
| Silica SiO2 | 2.41% |
| Alumina Al2O3 | 00.20% |
| Femic Oxide Fe2O3 | 00.50% |
| Titanium TiO2 | ---- |
| Monganious Oxide MnO | --- |
| Calcium Oxide CaO | 50.93% |
| Magnesium Oxide MgO | 02.64% |
| Soda Na2O | 00.091% |
| Potash K2O | 00.276% |
| Loss on Ignition LOI | 42.86% |
Bharat (Bharat Chemicals)
Plot No. B-37 Old Midc, Satara - 415004, Maharashtra, India
Share us via
